New Electrical Installation works at newly proposed Duty Rooms and Toilets at the premises of MCH and Canning SD Hospital, Canning in the Dist. of South 24 Parganas.(RATTIRER SATHI)

Amount

S&F of double door sheet steel (16SWG), powder coated cable end box for VTPN DB enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. provision for earthing attachment.

4 way (for VTPN DB)

S&F of double door VTPN MCB DB with IP-42/43 protection, on angle iron frame on wall and mending goods damages incl. necy. connection as per GS. (Emer. VTPN DB) - upto 160 A. - 4 way - 1 no. 415 V., 100 A. FP MCCB (Input) & 1 no. 415 V., 63 A. TP MCB, 2 nos. 16-25 A. TP MCBs, 3 nos. 240 V., 6-32 A. SP MCBs as required (Legrand/ Siemens/ ABB/ L&T/ Cabtree).

Supplying and fixing of double-door SPN MCB DB with IP-42/43 protection, concealed in wall incl. necy. connection as per GS. (Legrand/ Siemens/ L&T).

2+4 way Enclosure - 1 no. 240 V., 20 A. DPMCB & 4 nos. 240 V., 6-16 A. SPMCBs as required.

2+6 way Enclosure - 1 no. 240 V., 25 A. DPMCB & 6 nos. 240 V., 6-16 A. SPMCBs as required.

2+10 way Enclosure - 1 no. 240 V., 32 A. DPMCB & 10 nos. 240 V., 6-16 A. SPMCBs as required.

Distn. wiring in 3 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells/ RR Kabel) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish.

Average run 8 mtr

Distn. wiring in 3 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells/ RR Kabel) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V., 5 A., 3 pin plug point incl. S&F 240 V., 5 A., 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. i. On Board.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sq.mm.) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed]

Average run 8 mtr.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on PVC Modular switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq.mm.) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sq.mm.) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6 A. 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board

S&F PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required as per GS.

20 mm dia

Supplying and fixing of polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction).

13 mm dia 3mm thick Polythene Pipe

19 mm dia 3mm thick Polythene Pipe

Cutting channel of 31 mm x 31 mm/ 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works.

13 mm dia 3 mm thick polythene pipe without earth continuity wire

19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Laying 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells) of the following sizes in the prelaid pipe and making necy. connection as required.

3 x 1.5 sqmm (for Sep. 6 A. points)

2 x 2.5 sqmm + 1 x 1.5 sqmm as ECC (for Computer Boards & Sep. 16 A. Boards)

2 x 4 sqmm + 1 x 2.5 sqmm as ECC (For AC points)

2 x 10 sqmm + 1 x 6 sqmm as ECC (For SPN DB).

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

1.5 sq.mm. - N.S.

S&F sheet metal inspection box (16 SWG) of the following sizes flushed in wall after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

240 mm x 200 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws.

240 mm x 200 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

Supply & Fixing of 240 V., 6A., plug socket with separate 6 A. Piano key type switch (Anchor-Penta) - 2 sets on sheet metal switch board embedded in wall incl. S&F 175x100x65mm MS (16 SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required.

Supply & Fixing of 240 V., 20A., plug socket with separate 20 A. Piano key type switch (Anchor-Penta) - 1 Set & 240 V., 6A., plug socket with separate 6 A. Piano key type switch (Anchor-Penta) - 1 set on sheet metal switch board embedded in wall incl. S&F 200x150x65mm MS (16 SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V., 3 nos. 6 A. & 1 no. 20 A. plug socket with separate 3 nos. 6 A. & 1 no. 20 A. Piano key type switch, indicator & 20 A. switch type SP MCB (Anchor-Penta) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16 SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (Combined Board).

S&F 240 V. 6 A. 3 pin Modular type plug socket (Legrand-Myrius/ Cabtree) with 6A Modular type switch, without plug top - 3 sets and 240 V. 16 A. 3 pin Modular type plug socket with 16A Modular type switch (Legrand-Myrius/ Cabtree) without plug top - 1 no. on 2 row 12 Module PVC Modular type switch board with 2 row 18 Module top cover plate on wall incl. S&F switch board and cover plate and making necy. connections as per GS. (Combined Board).

S&F of 250V double door AC Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCBIsolator, 2 no. 16A SPMCB ('C' curve 10KA), 1no. Programmable Digital time switch-24 hrs with minimum switching of 15 minutes, and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC. [Make-ABB/L&T/Crabtree]

S&F 240 V. 25 A. 3 pin Modular type plug socket (Legrand-Myrius/ Cabtree), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections as per GS. (Legrand/ Cabtree) (For Split type AC points).

Supply and delivery of Twin LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency > 105 & <120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Supply and delivery of Single LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. [Make: Philips Havells, Bajaj, CG, Wipro or as per EIC] (Luminous efficiency > 105 & <120 Lumen/watt. The LED Luminaries & accessories shall have BEE certification)

Fixing only single/twin Tube light fitting complete with all accessories Directly on wall/ceiling with suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only single/twin Tube light fitting suspended 25 cm below the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts as per GS. incl. necy. connection by 2 x 1.5sqmm. flexible copper wire of 1.10 mt. length.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supplying & Fixing of Box type fan clamp of 150mm dia & 80 mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

Supply & Fixing 240V. Modular Socket (2 Module) type fan regulator (Step type) (Legrand/ Cabtree) on existing Modular switch board with top cover plate incl. making necy. connections etc as per G.S.

Supply & Fixing Socket type fan regulator (Step type) (Anchor-Penta) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.with safety wire & PS2 type capacitor, as directed by EIC. [Make-Orient (1200 mm Metalic Bronze Copper) or similar spec of Crompton/ Havells (Safety Wire & S3/P2 Capacitor)]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod and making necessary connection by 2x1.5 sqmm flexible copper wire.

Supply & Fixing of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp as per EIC (Make-HavellsPhilips/Crmpton)

S&D of following dia & RPM Heavy duty exhaust fan with complete accessories like blades etc. with 3 years warrenty. (Make: E.P.C./ CG).

9" dia Exhaust Fan with 1370 RPM

12" dia Exhaust Fan with 1420 RPM

Fixing only following exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as required and providing necy. length of PVC insulated wire and making connection as per GS.

9" dia Exhaust Fan

12" dia Exhaust Fan

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long). For Al. - 9" dia Exhaust Fan

S&F of GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh with good quality net at bottom on wall by necy. bolts & nuts (6 mm dia x 62 mm long).

12" dia Exhaust Fan

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar as per GS.

Connecting the equipments to earth busbar including S & F following size GI (Hot Dip) wire on wall/floor with staples buried and making connection to equipments as per GS.

S&D of the following sizes 1.1 KV voltage grade XLPE/PVC insulated Al. Armoured Cable. (Make: Havells/ Polycab/ Finolex/ KEI).

2 core x 6 sq.mm. (For Toilet Block near Canning SDH)

2 core x 10 sq.mm. (For New proposed Block near MCH)

4 core 35 sq.mm. (From existing Panel to new VTPN DB at MCH)

Laying of following cables on wall/surface incl. S & F MS saddles & earthing attachments, making holes etc. as necy. mending good damages and painting.

2 core x 6 sq.mm.

2 core x 10 sq.mm.

4 core 35 sq.mm. with 2 nos. 10 SWG Hot dip G.I. wires

Laying of following cable in UG trench 460 mm wide x 760 mm average depth, with proper brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

2 core x 6 sq.mm.

2 core x 10 sq.mm.

Laying only following Cable through existing GI Pipe.

2 core x 6 sq.mm.

2 core x 10 sq.mm.

Laying of cable as below, after cutting wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

2 core x 6 sq.mm. at an average depth of 75 mm in wall.

2 core x 10 sq.mm. at an average depth of 75 mm in wall.

S&F of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC insulated Al. armoured cables as below.

2 core x 6 sq.mm.

2 core x 10 sq.mm.

4 core 35 sq.mm.

Finishing the end of following XLPE/PVC insulated Al. armoured cables by crimping method incl. S&F of solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

2 core x 6 sq.mm.

2 core x 10 sq.mm.

4 core x 35 sq.mm.

S&F of following size medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

32 mm dia

40 mm dia

S&D of 230 V., following wattage LED outdoor type Flood light fitting, made up of pressure die cast aluminium housing with toughened glass and high power LED's with secondary lenses, of following specifications with 5 years warrenty. i. IP66 protection ii. 10 KV SPD included iii. Efficacy ≥110/120 LPW. iv. CCT - 5500-6000 K.

6000 lumen (minimum). LED Flood light fitting (for Shed area). (Philips - BVP103 LED50 CW FG GR PSU/ CG - CFS-504-50-57-60D-SL-GL-NSG)

S&F of 415 V., 6-10 A., 6 pole Bakelite terminal connector strip with screw arrangements (for connection of flood light fittings) on sheded structure incl. necessary connection as per direction of E.I.C.. (Make - Excel or equivalent)

Supply & Fixing 240 V., 20 A. Piano key type switch (Anchor Penta) on sheet metal switch board incl. S & F 100x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity - 7.0 kW (Minimum) Minimum ISEER - 3.8, BEE level - 3-Star(min)[1st July22 to 31st December 2024] IS Compliance - IS-1391(Part-I & Part-II) with all amendment Refrigerant - R410A/R32 Compressor - Rotary/Scroll Evaporator & Condenser Coil - Copper Operating outdoor temperature - 50ºC and above Power supply -230V, 50Hz (±tolerance asper applicable standard), as directed by EIC. The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape - 3 mtr (ii) Necessary 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr and suitable plug top(Anchor/North West/Legrand/Havells) [Make: O General/Zamil/Mitsubishi Electric]

Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity - 5.2 kW (Minimum) Minimum ISEER - 3.8, BEE level - 3-Star(min)[1st July22 to 31st December 2024] IS Compliance - IS-1391(Part-I & Part-II) with all amendment Refrigerant - R410A/R32 Compressor - Rotary/Scroll Evaporator & Condenser Coil - Copper Operating outdoor temperature - 50ºC and above Power supply -230V, 50Hz (±tolerance asper applicable standard),as directed by EIC. The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape - 3 mtr (ii) Necessary 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr and suitable plug top(Anchor/North West/Legrand/Havells) [Make: O General/Zamil/Mitsubishi Electric]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including Supply of required Refrigerant, S&F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm MS angle iron frame for outdoor unit (or arrangement recomended by Manufacturer), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC.

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines. (i) Supply & Laying of extra Refrigerant Copper pipe minimum Thicknes1.15 mm. Liquid pipe 9.52 mm (3/8") & Gas pipe 15.88mm (5/8") (Make - Royku/Totaline/Mandeep) and insulation of refrigerant copper pipeping by nitril rubber insulation tube of minimum thickness 9mm.(Make - Aroflex/Acoflex) also raping the insulation & copper wire with KB Gold raping tape as direction of EIC.

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines. i) 2.5 sqmm ,3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster)

Supply & laying Soft Drawn PVC Drain Pipe 19mm dia with proper supports & brackets as per direction EIC. (Make: Suprime/Oriplast)

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees.

BANERJEE CONCERN (BID ID -5667874)

BANERJEE ENTERPRISE (BID ID -5667918)

M/S ELECTRO POWER (BID ID -5667944)