Providing Power Infrastructure at Nagadiyath Kaval Industrial Area, Tangli Kaval Village, Kadur Taluk, Chikkamagaluru District (2nd Call)

Providing Power Infrastructure at Nagadiyath Kaval Industrial Area, Tangli Kaval Village, Kadur Taluk, Chikkamagaluru District

PART - A Station Breaker :

Supply of 11 kV MCVCB, 500 MVA, 25 kA, 1250 A incomer 800 A Feeder Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the w...

Supply of Annunciator Panel for the following combinations (for both MCVCB & PCVCB) 1I/c + 4F + 1CB with all lead and lifts complete as per specifications and directions of engineer in charge of the w...

Supply of 19Core 2.5sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 10Core 2.5Sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 4 core 6sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 2 core 6 sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 4core 2.5sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Earthing name plate & DP feeder name plates including printing of letters painting and board for new earthing pits with sttck ( 1 DP earthing namke plate & 1 for feeder name plate) with all ...

Supply of Rubber mats 1000mmX2000mmX12mm size tested for 15KV class with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Earth bond 450mm long as per KPTCL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

LABOUR CHARGES:

11KV switch gear erection, allignment and fixing to the foundation, indoor /outdoor 11kv switchgear panel /unit including movement from the point of unloading to the point of erection ...

Erection of control panel, auxiliary panel, carrier cabinet, marshalling bay kiosketc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of ...

Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness 2.75Mtr long with two part clamp out of GI flat 50x6mm continuasly welded around the pipe using cast iron welding electrod...

Grounding of equipment with 50x6mm GI flat and connecting to the equipment to the earth mat / ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and ...

Supplying & providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits with all lead and lifts complete as per specifications and directions of engineer in c...

Removing jelly before earth excavtion & & re-spreading jelly for laying back after back filling of soil(since separate labour charge(S) for jelly removing & respreading is not available in SR, labour...

Laying of control cables from rquipment to control panels & end terminals with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Testing and commisioning :

Wiring: identification of wires, ferrulings, crimping & termination wiring: identification of wires, testing of realys CTs & PTs & breakers for operation. For each additiona...

Wiring & assisting in testing & commissioning at 11KV indoor/outdoor switchgear with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Wiring & assitinig in testing & commssioning at 11Kv annunciation desk for 1 no of switchgear with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Civil portion: Extension of 11KV switch gear panel bed:

Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc and removal of form work for foundations footings, bases of columns for mass concrete including cost of all materials, labour with...

Providing size stone masonry with hard stone in foundation & plinth with cement mortar1:6 ( 1 cement 6 coarse sand) with all lead and lifts complete as per specifications and directions of engineer in...

Fabrication, supply & centering M S angular struss for all spans as per approved designs and drawings providing framed work, including cutting, hoisting, fixing in position and applying a priming coa...

Providing and laying to required line and slope roofing with corrogated asbeestos cement sheet 6mm thicj fixed with galvanized iron J or L hooks botls and nits 8mm dai CI plain and bitumen washers ov...

Providing and fixing structural steel work riveted, bolted or welded in bulk up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved...

Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing chemical earthing for grounding conduits, IC cutouts & other equipments backfills compinf which is non corrosive, thermally conductive potential to permissible limts, superior fau...

Supplying and running GI/copper conductor for grounding and ( along with other wires in conduit system of wiring) using necessary suitable size clamps nails guttas/spacers etc 10SWG wire with all lead...

PART-B Providing DP Structure:

Supplying of DP structure using 9 Mtr long RCC poles 145kgWL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 KV 45KN polymeric pin insulator with GI pins with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PG clamps Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply and fixing Anti - climbing device 12 Mtrs barbed wire with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply and fixing caution/board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Labour portion:

Erection of DP structure using 9 Mtr long RCC poles with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fixing Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fixing spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fixing of 11 KV 400 A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fixing of ‘H’ frame for mounting 11 KV 400A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

PART-C Providing Spun pole structure:

Supplying of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge o...

Supplying of Single H Frame without Transformer Seating and Seating angle support cross arm for 11mtr Spun Pole for 63/100/250/500kVA (OH Line) - GI with all lead and lifts complete as per specificati...

Labour portion:

Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Part - D Supplying & Laying of 11KV 3C X 400 sqmm XLPE UG Cable:

Supplying of 11 KV (E) 3 core 400 sqmm XLPE HTUG cable with pressure extruded inner sheath , ROUND WIRE ARMOURED as per IS - 7098(Part ...

Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor termination kit with all lead and lifts complete as per specifications and directions of engineer in charge of t...

Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable outdoor termination kit with all lead and lifts complete as per specifications and directions of engineer in charge of ...

Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the wor...

Supply of manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of cable covering tiles 250x125x40mm or 125x125x40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of 100mm dia for drain crossing and cable raising with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Laying of UG cable by Trench less technology by adopting horizontal boring and drawing of cables including preparation at site. Rock Soil - 8” Bore (UG cable along with upto 5 Nos of 50/42 mm or 40/...

Cable trench excavation for ordinary soil with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Labour Charges:

Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff with all lead an...

Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type termination pot head (indoor / out door) with all lead and lifts complete as per specifications and directions of engineer in charge...

Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Covering the tiles of 250X250X40mm for 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts complete ...

Fixing of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Part - E Providing OD's 350MVA, 630Amps:

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 RMU 4 Way, (2OD + 2VL,) One Incomer + Two Breakers +One ou...

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 1 OD, 350 MVA, 630 Amps with all lead and lifts complete as per specifications and directions of en...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required with all lead and lifts complete as per specifications and directions of engineer in cha...

For construction of Foundation : Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works...

For construction of Foundation : Providing and laying in position Cement Concrete for all Foundation works including cement slap for transformer. The granite/trap/basalt crushed graded coarse aggregat...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wires or nuts bolts and washers as required with all lead and lifts comple...

Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...

Supplying of Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants et...

Labour portion:

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fil...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per ...

Part - F Extension of HT/LT lines:

Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV, Horizontal Cross Arm - Mild Steel (MS) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LT 4 Pin Cross Arm - MS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 1.1 kV Ceramic Pin Insulator (Shell only) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of No. 8 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Spiral Earth Electrode with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Coyote ACSR conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Rabbit ACSR Conductor as per IS-398 with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PG clamp for Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PG clamp for Rabbit conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Labour Portion :

Erection of Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth with all lead and lifts complete as per specifications and directions of engineer in charge of the...

Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fixing of Horizontal cross arm and LT 4 pin corss arms including Single Top Support Brace and Insulator fixing with all lead and lifts complete as per specifications and directions of engineer in char...

Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Stringing of Coyote conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications and di...

Stringing of Rabbit conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications and di...

Part G: Providing 250KVA Transformer center on Spun Pole structure:

Supply of Spun pole 11 Mtr Long with all lead and lifts complete as per specifications and directions of engineer in charge of the w...

Supply of Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA (UG Cable) MS with all lead and lifts complete...

Supply of HT Single Top Support with bolts, nuts & washers with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Rabbit ACSR Conductor for jumps with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Alkathene Tube 19 mm Dia and in coils of 30 Mtr with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of GI Wire 10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Guy Wire 7/10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of GI Pipe, 100 mm Dia for Cable raising etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PVC Pipe 160 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PVC Pipe 25 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all lead and lifts complete as per specifications and directions of engineer in charge of the w...

Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LT Distribution Box for 250 kVA with MCCB with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Al Lead Wire - 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Heavy Duty Long Barrel Copper Lug - 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of PG Clamp - Rabbit to 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Spacers for DTC Wiring with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of LT Electronic Tri-Vector Meter 5 Amps, - 0.5/1.0 Accuracy Class with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymetic Type with ground disconnector with all lead and lifts complete as per specifications and directions of engineer in charge of the w...

Supply of PVC Insulation Tape in rolls of 10 Mtr with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Horizontal Cross Arm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of MS Fish plate with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Caution/Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all accessories with all lead and lifts complete as per specifications and dir...