S.R. to office of the Dy. Executive Engineer, National Highway Sub Division, Bodeli Ta. Bodeli Dist. Chhotaudepur (Repairing of Grill, Window grill)

No. figures

1 Dismentaling doors, windows, ventilators etc. (wood or steel) 33.00 No. 196.66

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and lift.

(i) Not exceeding 3.00 Sq.m. in area.

2 Demolition of brick work and stone masonry including stacking of 1.10 Cum 576.30

serviceable materials and disposal of unserviceable materials with

all lead and lift. (ii) In Cement Mortar.

3 Providing and laying brick work using common burnt clay building 6.90 Cum 4568.40

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in super structure above plinth level upto floor two level

in cement mortar 1:6 (1 cement : 6 fine sand) (Conventional) for all

floors in cement mortar in foundation and plinth (A) Modular

including the cost of all materials and labour charges etc. complete.

4 Providing and laying controlled cement concrete M-200 and 0.30 Cum 6257.57

curing complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work for Beams for all floors.

5 Providing and laying controlled cement concrete M-200 and 1.00 Cum 6754.84

curing complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work for slab for all floors.

6 Providing I.S.I. mark T.M.T. bar Fe-500D reinforcement for RCC 173.00 Kg. 77.29

work including bending, binding and placing in position complete for

all floors.

7 Dismentaling tiled of stone floors laid in mortar including stacking 29.00 Sq.m. 50.28

of serviceable materials and disposal of unserviceable materials

with all lead and lift.

8 Dismantling sanitary fittings like wash basin, W.C. pan Indian and 4.00 No. 424.10

European type, flushing tank etc. including stacking the materials

with all lead and lift.

9 Removing and scraping of old deteriorated plaster of any 268.00 Sq.m. 20.36

thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of work

with all lead and lift.

10 Providing and fixing machine cut, free edges, polished Green 47.00 Sq.m. 1572.57

Marble stone slab 18 mm thick (single piece) for vertical wall /

Doors / Windows Sill, Jams for cladding as per design including

full moulded round inside edge and laid on 10 mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) jointed with grey cement

slurry including rubbing and polishing, finishing etc. complete.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

11 Providing and fixing M.S. grills of required pattern to wooden 312.00 Kg. 166.22

frames of windows etc. with M.S. flats at required spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws (B) Ornamental grill.

12 Providing 20mm thick cement plaster in single coat on single or 306.00 Sq.m. 258.23

half brick walls for plastering upto floor two level and finished even

and smooth in cement mortar 1:3 (1 cement : 3 sand).

13 Removing dry or oil bound distemper by a washing and scraping 25.00 Sq.m. 11.82

and sand papering the wall surface smooth including necessary

repairs to scratches complete.

14 Providing and fixing single layer waterproof gypusm board 12.5 86.00 Sq.m. 606.95

mm thick sections using waterproof board of size 1220 mm x

mm x 8.0 mm suspended by G.I suspender of size 25mm x 3 mm

with intermediate channel of size 18 mm x 40 mm x 0.80 mm at

1220 mm center to center ceiling section of size 40 mm x 35 mm x

0.55 mm at 457 mm center to center and perimetre channel A of

size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops

including paper tap sand soffit cleat, anchor fastener, scotch bolt

connecting cleat joining compound top coat on ceiling including

making necessary opening for light fitting, diffuser etc. complete as

per detail drawing as directed.

15 Applying two coats of putty & two coats of primer of approved 412.00 Sq.m. 40.59

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

16 Wall painting (two coats) with plastic emulsion paint of approved 412.00 Sq.m. 134.04

brand and manufacture on ceiling and soffits of slab surface to

give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered

17 Painting two coats (excluding priming coat) on new steel and 16.00 Sq.m. 94.39

other metal surface with enamel paint, brushing, interior to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

18 Finishing wall with weather proof exterior emulsion paint on wall 47.00 Sq.m. 122.14

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of

loose powdered materials etc. complete for all heights.

19 Providing and laying coloured glazed tiles of the size 300 mm x 89.00 Sq.m. 1523.67

200 mm x 8mm / 300mm x 450mm x 8mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

20 Providing and fixing Door of factory made & stamped I.S. 12823 28.00 Sq.m. 3623.88

grade one, type one 35 mm thick solid core, melamine faced,

three layered resin, flushed door, having decorative lamination on

both side including 30 cm long stainless steel pipe handle on both

side SS ASIS 304 Grade, SS stopper 20 cm, SS Aldrop 30 cm both

side, SS hinges 3 Nos. in each shutter & fixtures & fastenings as

directed by Engineer in charge etc. complete.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

21 Providing and fixing window having extruded aluminum colour 19.00 Sq.m. 1583.95

anodized section frame main outer size 95mm x 24mm x 1.17mm

(@ wt. of 0.738 kg/mt), horizontal three track member size 92mm

x 31.75mm x 1.30mm (@ wt. of 1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (@ wt. of 1.06 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (@ wt.

of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm

(@ wt. of 0.456 Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated alluminium fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details

etc. complete.

22 Providing and fixing standard extruded of alluminium section of size 2.00 Sq.m. 1301.82

63.50 x 38.10 x 1.95 mm (@ Wt 1.094 kg/Rmt) with colour anodized

alluminium frame with 5mm thick transparent bronze colour tinted

float glass with colour anodized alluminium frame for ventilation with

5mm thick frosted glass as details etc. complete for window.

23 Providing and laying broken china mosaic flooring for terrace using 7.00 Sq.m. 779.70

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall, clearing with water and oxalic acid etc. as directed.

24 Providing and fixing precast Rubber dye / steel dye inter locking 143.00 Sq.m. 707.55

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

confirming to IS 15658 : 2006 including 35 mm sand layer for

levelling and filling the joint with sand in proper line and level as per

guidelines of IRC : SP 63-2018 etc. complete.

25 Providing and fixing wash down water closet (European W.C. Pan) 3.00 Each 1356.81

with integral P or S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 fine sand) (seal and cover to be

measured and paid for separately) (A) Vitreous china pattern in

white colour as directed by Engineer in charge.

26 Providing and fixing Table top wash basin with pillar cock, 3.00 Each 3153.22

chromium plated, bottle trap and waste pipe, necessary couplings of

approved quality for wash basin.

27 Providing and fixing 600mm x 450mm beveled edge glass mirror 3.00 Each 859.41

of superior glass mounted on 6mm the A.C. sheet or plywood sheet

and fixed to wooden plugs with C.P. brass screws and washers.

28 Providing and fixing I.S.I. mark 25 mm dia. U.P.V.C. pipe (SCH- 40) 22.00 Rmt. 50.50

length = 12.0 mt.

29 Providing and fixing I.S.I. mark 15 mm dia. U.P.V.C. pipe (SCH- 40) 18.00 Rmt. 24.83

length = 12.0 mt.

30 Providing and fixing I.S.I. mark P.V.C. pipes 10 Kgf/Sq.cm. 50mm 15.00 Rmt. 89.87

dia. as directed by Engineer in charge.

31 Providing and fixing I.S.I. mark P.V.C. pipes 6.0 Kgf/Sq.cm. 110mm 18.00 Rmt. 209.71

dia. as directed by Engineer in charge.

32 Providing and fixing PVC SWR Gully trap 160 x 110. 6.00 Each 289.30

It. Rate in

Description of Item Qty. Unit Amount

No. figures

33 Jet spray heavy duty with S.S. Braided hose 60 cm long. 3.00 Each 308.99

34 Providing and fixing chromium plated flush cock of approved 3.00 Each 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as

directed by Engineer in charge.

35 Providing and fixing brass screw down stop tap of approved quality 3.00 Each 220.82

of 25mm dia. as approved by Engineer in charge.

36 Providing and fixing C.P. bib cock 15mm heavy duty with cap. 12.00 No. 400.58

37 Providing and fixing C.P. brass shower rose with 15mm or 20mm 3.00 Each 282.16

inlet. (A) 100mm dia. each.

Total Rs.

i.e. Rs. Eight lacs Fourteen thousand Seven hundred Eleven and Ninety Two paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ____________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 3000.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Bodeli (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Bodeli Chhotaudepur Chhotaudepur