Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance KAKKADAMPOYIL NILAMBUR MALAPPURAM 673604 | MALAPPURAM | MALAPPURAM | KERALA | 673604 | Admitted-Finance |
| 2 | Admitted-Finance PALAKKAD | PALAKKAD | KERALA | 678001 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹32.2 L
EMD Value
₹50,000
Closing Date
22 Jun 2020, 6:00 pmClosed
DGM Subcontract
KEL, KOCHI
Supply, installation and commissioning of Lighting systems, CCTV, Public Address System and UPS at Peringammala Indoor Stadium
2020_KEL_365003_1
KRO/ BDC/630/2020
Open Tender
Miscellaneous Works
Item Rate
45 days
KEL, KOCHI
As per NIT
5 documents required · 5 mandatory
₹2,950
Yes
online
₹50,000
Yes
29 Jun 2020
15 Jun 2020
24 Jun 2020
15 Jun 2020
22 Jun 2020
15 Jun 2020
15 Jun 2020 - 20 Jun 2020
Amount
MARKET ITEMS
SUPPLY, CARRIAGE AND ERECTION OF LIGHT FITTINGS
Supply, conveyance, testing and commissioning of pre-wired light fittings with all accessories and lamps of all types directly on wall/ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flexible wire or extending the original wiring and giving connections, making good the damages, colour washing etc as required
Flood Light ( Philips Make BVP483 LED 235 CW SWB PSU GR ) for volleyball court area.
Supply
Labour
Clamp
Supply
Labour
Flood Light ( Philips Make BVP483 LED 185 CW SWB PSU GR ) for Badminton court area.
Supply
Labour
Clamp
Supply
Labour
Post top Light ( Wipro/ Omnitech or equivalent Make LED post top )
Supply
Labour
Track Mounted Light (Ankur make 20W LED track light with beam angles 30deg and 60 deg along with 8 nos of 2 m track patti with suitable 4 jointers)
Supply
Track light 20W 30Deg
Track light 20W 60Deg
Track 2m
Jointer
Labour
Wall mounted uplight (Tulip or equivalent make 24 W LED LDW 2202 24 4000k)
supply
Labour
Led Tube Light (Wipro or equivalent make ceiling mounted LED batten 4 ft 20W 4000k)
supply
Labour
Led Tube Light (Osram or equivalent make wall mounted LED batten 2 ft 10W 4000k)
supply
Labour
Suspended Mirror Optic luminarie (Wipro or equivalent make LED 36W 4000K )
supply
Labour
Hanging system for the above( 2 each)
supply
Labour
Ceiling mounted Mirror Optic luminarie (Wipro or equivalent make LED 36W 4000K )
supply
Labour
Wall mounted Mirror Optic luminarie (Wipro or equivalent make LED 36W 4000K )
supply
Labour
Corner light (Tulip or equivalent make wall mounted Delta 50 C2-DTC50W2 LED 14W,4000K
supply
Labour
Suspended linear light (XAL make LED 37w 4000k 2.352 mtr
supply
Labour
Wall mounted Bulk Head light( Philips or equivalent make endura LED WT 202 w 9W LED 40 4000K PSU)
supply
Labour
Street light( Omnitech or equivalent make 70 w 4000K)
supply
Labour
4 m post and its wall fixing accessories.
supply
Labour
Street light( Omnitech or equivalent make 40 w 4000K)
supply
Labour
4 m post and its wall fixing accessories.
supply
Labour
Suspended linear updown light (XAL make 27+9 w 4000k 1.188 mtr
supply
Labour
Ceiling Mounted Down light ( Hazel make 30W, 60 deg 4000K
supply
Labour
MARKET ITEMS
Exit signage AC operated with inbuild battery back up
supply
Labour
MARKET ITEMS
Supplying 32 Channel NVR, which shall have the features of H.265 decoding, 2 SATA HDD support upto 12TB, HDMI/VGA simulatneous Video output etc complete as required
Supplying, Installation of 2 TB surveilance grade Hard disk inside NVR complete as required
Supplying 4MP IP Dome camera shall having features of 2.8mm fixed lens, 30 Mtr IR, H.265 encoding, IP67, PoE etc complete as required
Supplying 4MP IP Bullet camera shall having features of 2.8-12mm Motorized lens fixed lens, 40 Mtr IR, H.265 encoding, IP67, PoE etc complete as required
Supplying and fixing of PVC backbox for camera with necessary fittings and clamp complete as required
Supplying and fixing of 32" LED monitor with wall mouting fixed bracket complete as required
Supplying and laying of 10 Mtr length HDMI cable compatible for NVR and monitor complete as required
Supplying of 9U size wall mountable rack compatible for fixing NVR complete with mounting hardware, PDU and cable manager as required
Supplying, fixing and termination of 24 Ports 10/100/1000Mbps unmanaged, PoE switch complete as required
Supplying and laying of CAT6 UTP cable complete as required
Supplying and laying of CAT6 UTP stranded copper patch cord complete as required
Supplying and termination of RJ45 jack complete as required
Installation, termination and commissioning of 32 channel NVR in wall mounting rack complete as required
Installation, termination and commissioning of IP camera complete as required
Fixing of 9U rack in wall complete as required
Supplying, installation and commissioning of 1 KVA online UPS complete as required
Supplying and installation of 12V65AH SMF battery complete as required
Supplying and installation of open vented, floor mounting Battery rack made up of MS angle, and finished with minimum 1 coat of primer and paint. Supplier shall also provide suitable length and guaged battery interlinks complete as required
MARKET ITEMS
PUBLIC ADDRESS SYSTEM
Supplying, installation of 1600 W dual channel power amplifier with necessary cords complete as required
Supplying, installation of 350W power amplifier which shall have minimum 6 mic and 2 aux input with necessary cords complete as required
Supplying, installation of 17 channel Pre amplifier with digital player complete as required
Supplying and installation of wall stand complete as required
Supplying of moulded cabinet speaker box of 400W complete as required
Supplying and installation of 2 channel 32 band equalizer complete as required
Supplying of 40 W 100V music horn shall have power taps of 5/10/20/40 W complete as required
Supplying of 6W 100V wall mount speaker with volume controller complete as required
Fabrication, supplying and fixing of suitable clamp required for the proper installation of Moulded cabinet speaker in the building structure complete as required
Fabrication, supplying and fixing of suitable clamp required for the proper installation of Horn speaker in the building structure complete as required
Supplying and installation of 48V DC gooseneck mic complete with necessary cord as required
Supplying and fixing of Table top base for gooseneck mic complete as required
Supplying and installation of 48V DC power supply for condenser microphones with XLR In and out connection complete as required
Supplying, laying and termination of 10 Mtr length, XLR-XLR low noise audio cable complete as required
Supplying, laying and termination of 2 Mtr length, XLR-Phono low noise audio cable complete as required
Supplying and installation of UHF wireless mic system with Handheld and lapel mic complete as required
Supplying and installation of 22U floor mounting rack along with lockable front and rear door complete with PDU and mounting hardware as required
Installation of speaker in wall/ceiling with suitable clamp and necessary stand complete as required
Configuration, testing and commmissioning of PA system complete as required
PART II - MARKET ITEMS
METERING PANEL(OUTDOOR TYPE)
Metering portion
3-Phase CT Operated Electronic Energy Meter - 1no.
100A HRC Fuse base with links - 3no.
100A 2 way neutral link - 1no.
100/5A, 15VA CT -3no.
Consumer portion consisting
100A, 4P SDF with inbuit neutral link
80A HRC Fuse link - 3no.
Metering Cubicle: Thermoplastic polycarbonate IP65 Outdoor Enclosure (Hensel make Mi 2800 or equivalent)
Accessories as per schematic drawing.
Supply
Labour
MAIN PANEL
Supply, installation, testing and commissioning of cubicle type, dust and vermin proof, floor/ wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet, powder coated after 7 tank process, fully compartmentalised complete with hinges and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel with all necessary meters, indications, CTs etc as shown in the electrical drawing or as per the latest Electrical Inspectorate requirement complete with all connections and interconnections for the following panels.
Special Note:
All breaker releases shall be set as per the ratings shown in the drawings
Bus bar sizes shall be taken either as shown in the drawing or as design parameter of 0.8A/Sqmm for Al and 1.2A/Sqmm for Cu which ever is higher.
Cable Chamber shall be provided for incoming & outgoing cables or as required
All SDFs and SDUs mentioned shall be 415V, 50Hz AC23 duty type
Earth bus shall be full length of the panel and all Switches/breakers shall be double earthed.
GA drawings for all the panels before manufacturing shall submit to the Electrical Consultants to get approval before manufacturing.
The board shall comfirm IS 8623 standards.
Incomer
100A ,FP Change Over Switch-1 no
100A , 4P,25kA MCCB -1 no
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Outgoings
40A,10kA TP MCB - 1 no
32A,10kA TP MCB - 4 nos
Busbar
100A continuous duty, 415Volts A/C, 3 phase and neutral Aluminium busbar with colour coded heat shrink sleeves supported on SMC type grip supports 35kA.
Accessories as per schematic drawing.
Supply
Labour
DISTRIBUTION BOARDS & ACCESSORIES
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc. as required. Combination as in drawing
3 phase 12way TPN 7 SEGMENT DB Double Cover (IP 43)
Supply
Labour
Supply and fixing of company made cable end box suitable for the following etc complete as required.
3 phase 12way TPN 7 SEGMENT DB
Supply
Labour
LT CABLE SUPPLY
Supply of one number XLPE armoured power cable of 1.1 KV grade of following size conforming to relevant IS standards as required.
3.5x50sq.mm Al Cable
Supply
4x16sq.mm Al Cable
Supply
4x10sq.mm Al Cable
Supply
COMPUTER POINTS
3nos 6A multistandard sockets controlled by 1 no16A one way switch with indicator in single recessed metal box with front and inner plate etc complete in position and giving connection. (For computers)
Supply
Labour
S/F 25A SWITCH:
Supply and installation of 25A SP modular type switch, 230V, with indicator in company made box and front plate including necessary interconnections and all accessories etc as required.
Supply
Labour
S/F PLUG POINT:
Supply and installation of 25A SP modular type 3pin socket, 230V, in company made box and front plate including necessary interconnections and all accessories etc as required.
Supply
Labour
ENCLOSURE
Metal enclosure for mounting 2P Isolator & 2P RCCB (for SPD's)
Supply
Labour
SUPPLY, CARRIAGE AND ERECTION OF FITTINGS
Supply, conveyance, testing and commissioning of pre-wired light fittings with all accessories and lamps all of types directly on wall/ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor, making good the damages, colour washing etc as required.
1200mm sweep ceiling fan complete with all standard accessories excluding regulator. (Crompton Make Cool Breeze)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
300mm sweep Wall fan complete with all standard accessories. (Crompton Make WM Windflo 12" (Hi-Speed)
Supply
450mm sweep Wall fan complete with all standard accessories. (Crompton Make VORTEX SERIES )
Supply
Fixing Clamp for the above
Supply, conveyance, testing and commissioning of 300mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. (Crompton Make EXHD300)
Supply
MS Mounting arrangement for exhaust fan
Supply, conveyance, testing and commissioning of 380mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. (Crompton Make EXHD380-4-1 (ISI))
Supply
MS Mounting arrangement for exhaust fan
TOTAL PART II - MARKET ITEMS
UPS System consist of one no. 1KVA and one no. 2KVA and its battery, rack all accessories ans wiring for emergency lighting for CCTV and computer etc
Supply
Labour
FLEXIBLE CONDUIT & ENCLOSURE FOR UPS
Supply and fixing the following sizes of steel wire reinforced flexible uPVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface making good the damages etc as required.
Supply
Labour
Supply and fixing uPVC conduit glands for the following sizes of steel wire reinforced flexible PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories making good the damages etc as required.
uPVC conduit gland suitable for 30mm uPVC conduit
Supply
Labour
Metal enclosure for mounting 2P Isolator & 2P RCCB (UPS i/c)
Supply
Labour
SAFETY EQUIPMENTS
Supply and providing 3.3kV Class A insulating mat (2mm thickness minimum) for high voltage electrical purpose, fire retardant, water & moisture proof, 100% shock proof under leakage current of 10 mA. The mat generally shall confirm in to IS15652:2006.
Supply
Labour
Supply and providing First Aid Chart with 8mm thickness minimum duly framed and placed in a conspicuous location for clear vision.
Supply
Labour
Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.
Supply
Labour
Supply of insulating gloves for working on electrical fittings - made from 100% ultra pure natural rubber - smooth finish inside and outside - high dielectric characteristics - maximum working voltage is 17000 Volts - Class 2 - As Per EN:60903:1993 Standard with CE Markings
Supply
STATUTORY CHARGES
Preparation of drawings for submission to KSEB and Electrical Inspectorate for Approval including liasoning with EB/EI complete with statutory fee.
BINDU VEERAN
ALLUMINA ELECTRONICS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .