Construction of 02 nos of covered (01 nos) Basketball court, players change room cum toilet and other miscellaneous works for RSPL at Rourkela.

Grand Total 75,24,111.50

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level : 0.00

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources) cum 5772.881 13.63 78684.37

4 4.3 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 0.00

4.1 4.3.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm. 332.331 53.76 17866.09

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in foundation

and plinth in 0.00

5.1 6.1.2 Cement mortar 1:6 (1 Cement : 6 coarse sand) Cum 6044.280 3.26 19685.01

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V in all shapes and sizes in: 0.00

6.1 6.4.2 Cement Mortar 1:6 (1 Cement : 6 coarse sand) Cum 7716.907 39.55 305209.84

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer

12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate,

7 11.5 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per

manufacture ’ s specifications. This includes cost of cement slurry, but excluding the cost of nosing of

steps etc. complete.

8 13.16 6 mm cement plaster of mix : 0.00

9 13.1 12 mm cement plaster of mix : 0.00

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3

kgp per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

11 13.80 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

12 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade: 0.00

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior

primer applied @0.90 litre/10 sqm) Sqm 136.102 76.80 10452.61

Providing and Laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

13 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and

matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles

will be done with the notch trowel, piler, wedge, clips of required thickness, levelling system and rubber

mallet for placing the tiles gentle and easily. 0.00

13.1 11.41A.3 Glazed Vitrified tiles Matt/ Antiskid finish of size 0.00

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk)

and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded star headed SS screws having

minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

minimum compressive strength of 58N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread

of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid

for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth

and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable

but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush

door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength

of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,

water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with

necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-

Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete : 0.00

Providing and fixing bright finished brass 100 mm mortice latch and lock

17 9.76 with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete. each 724.280 8.00 5794.24

Digitally signed by Rakesh

S.No. DSR Code-23 Description of Indicative Items Unit Rate without Qty

Providing and fixing bright finished brass 100 mm mortice latch with one

18 9.77 dead bolt and a pair of lever handles of approved quality with necessary

screws etc. complete. each 615.763 8.00 4926.10

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete. each 103.093 8.00 824.75

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia

double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia

polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction

of Engineer -in-charge. 0.00

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including

21 10.16 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including

welding and bolted with special shaped washers etc. complete. 0.00

21.1 10.16.1 Hot finished welded type tubes kg 164.746 5880.00 968705.08

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or

L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet

washers filled with white lead, including a coat of approved steel primer and two coats of approved paint

22 12.1 on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding

the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

22.1 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² Sqm 1065.720 840.00 895205.08

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L

hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.00

23.1 12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m² meter 830.932 63.00 52348.73

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets

24 12.7 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water

pipes complete. 0.00

24.1 12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m² meter 872.585 63.00 54972.84

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an

even shade: 0.00

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved

brand and manufacture sqm 191.737 48.60 9318.43

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50

meters lead as per direction of Engineer-in-charge. 0.00

26.1 15.2.1 Nominal concrete 1:3;6 or richer mix (including equivalent design mix) cum 2062.924 32.40 66838.73

Providing and fixing mirror of superior glass (of approced quality) and of required shape and size with

plastic moulded frame of approved make and shade with 6 mm thick hard board backing: 0.00

27.1 17.32.2 Rectangular Shape 453x357 mm Each 1154.068 2.00 2308.14

27.1 17.32.4 Rectangular shape 1500x450 mm Each 1773.729 1.00 1773.73

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All work up to plinth level : 0.00

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources) cum 7665.890 9.58 73408.56

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,

balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above

29 5.3 level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources).

Steel reinforcement for RCC work

Thermo mechanically treated bar of grade Fe 550D or more Kg 91.398 3273.60 299201.49

30 5.9 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 0.00

30.1 5.9.3 Suspended floors, roofs, landings, balconies and access platforms Sqm 785.805 31.92 25082.90

Lintels, beams, plinth beams, girders, bressumers and

cantilevers Sqm 624.068 31.92 19920.24

30.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 814.661 31.92 26003.98

Dismantling old plater or skirting raking out joints and cleaning the surface for plaster including disposal

of rubbish to the dumping ground within 50 meters lead sqm 46.314 48.60 2250.84

Providing and placing in position 100 mm thick factory made machinebatched & machine mixed Precast

RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC

work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @

maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all

edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be

welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all

leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade

made by block making machine with strong vibratory compaction, of approved size, design

33 16.68 & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse

sand, filling the joints with line sand etc. all complete as per the direction of Engineer -in-charge.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming

to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making

necessary holes for inlet, outlet and over flow pipes. The base support including fittings & fixtures for

tank shall be paid separately. per litre 9.322 1000.00 9322.03

Total of Schedule Items 42,25,192.23

NON SCHEDULE ITEM

Unit MR Rate MR Amount

S.No. NS Code Description of Indicative Items

without GST without GST

Acrylic surface for Basketball

5 layers System ITF approved over the Asphalt sub base For tennis AND BASKETBALL

2 coat of Acrylic Resurface

2 coats of All Sports Color with silica sand

1 coat of colour

for game line marking Sqm 1301.695 555.000 722440.68

Surface for Basketball

1 coat of colour for game line marking Job 29661.017 1.000 29661.02

Digitally signed by Rakesh

S.No. DSR Code-23 Description of Indicative Items Unit Rate without Qty

Fixed Basketball Post

sypplying of Fixed Basketball post with net, outdoor model Made of 150 mm x 150 mm Sq tube with

boom extension of 3.2 m.

36 NSI 3 Board Frame: 40 mm x 40mm square tube structure with 12mm Toughen Glass 1800X1050X (12 mm)

mounted with the help of cross support.

Dunking ring: dunking rim with three spring mechanism. Die made, as per international standard. As

approved design." Pair 190061.017 1.000 190061.02

Total of Non Schedule Items 9,42,162.71

Total (Schedule + Non Schedule) Items 51,67,354.94

Digitally signed by Rakesh

Name of the work: Construction of 02 nos of covered (01 nos) Basketball court, players change room cum toilet and other miscellaneous works for RSPL at Rourkela

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF ELECTRICAL WORKS

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. AMOUNT Rate without AMOUNT

(RS.) GST (RS.)

SUB HEAD-I : EXTERNAL LIGHTING

1) NS-1 Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured

cables suitable for working voltage upto and including 1100 Volts complete as required and as per

specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

2 following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

DSR-2022- Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required.

DSR-2022- Upto 35 sq. mm

4) NS-2 Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable

including providing terminal lugs,double compression gland , crimping the joints ,providing

insulation tape,effecting terminal connections to the equipment complete as required.

a 2 x 6 sq,mm, Al conductor cable Nos. 32 # 694.74 22,231.59

5) Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper

conductor wires in existing conduits including end terminations with copper lugs.

a. DSR-2022- 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires RM 170

b. DSR-2022- 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper RM 300

1.14.4 conductor wire

6) Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep

including all accessories complete as required and as per specifications.

a. DSR-2022- 25 mm dia GI conduit RM 60

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with

7 RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm

deep) and refilling etc as required.

DSR-2022- 100mm dia

8) NS-3 Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other

accessories as required.

10) NS-4 Supply of LED Sports 500W Floodlight with high-power LED shall be made of Single/Modular

housing noncorrosive aluminium die cast PC Modular lens plate with toughened glass to ensure

better uniformity of lighting distribution.,suitable for 15/30/10 degrees. All Lens should be screw

fitted on the housing to ensure the proper mechanical alignment to increase the rigidity of fixing of

lens to get the unify photometry distribution. Designed heat sink for efficient thermal management

along with safety chain. The luminaire should be IP66 and IK07 suitable and detachable separate

compartment for driver considering ease of maintenance. Same housing should be compatible with

different beam angle. LED Floodlight luminaire shall have CRI > 70 and CCT > 5700 K (tolerance

on CCT: +/- as per ANSI C78:377A), SDCM (Mac Adam Ellipse): < 5. The system Efficacy of the

luminaire shall be typical > 110 Lumen/Watt. The luminaire shall be designed to ensure lumen

depreciation of up to 30% over 50K burning hrs at designed ambient temperature 35 Deg Celsius.

The driver shall have a power factor of >0.95. THD of the driver < 10%, EMI/EMC compliance. The

driver shall have Over Temperature, Under Voltage/Short Circuit, Over Voltage/Open Circuit and

Output failure protections, with an Efficiency of > 90%. Driver can withstand high voltage up to

440V for > 24 Hrs. The floodlight and external driver (should be potted for better reliability) shall

comply to Class-I electrical insulation class. Inbuilt driver surge protection of minimum 6KV must .

Driver is having voltage ripple < 1% (peak to average) and output current ripple < 5% (peak to

average). Driver is having over heating protection circuit (thermal fold back > 75 Deg Celsius)

which ensure the safety of luminaire and surrounding. The average lumen maintenance summary

needs to be submitted at the different case temperature (soldering point) at Ts: 55, 85 and 105 Deg

Celsius. All plastic parts, cable used etc. shall be UV protected. Input cable of luminaire should be

rubber as per IS 10322 (part 5/section 5). The luminaire should comply with all the required IEC &

IS standards. LM79 (C type Gonio Photometry IES LM 79 -19) & LM80 report must be submitted

from a NABL accredited lab. Luminaire and Driver must have BIS certificate.

16) Feeder Piller (Basketball Ground)

NS-5 Design, manufacture,Supply, Installation, testing and commissioning at works of Double door

panel fabricated with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55

enclosure protection, as per IS-2137(Revised), floor mounting free standing on a suitable

massanory pedestal outdoor type panel,provided with hinged detachable and lockable outer

opening doors with the following incoming/outgong MCCB/ MCBs mounted therein including

making connections/ interconnections, earthing, painting etc. as required.The panel shall have

canopy arrangement on the top.All MCB to be C curve .

a. Feeder Pillar - X

The incoming shall comprise the following :-

1 No 63A FP MCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith

Earth fault relay and CBCT.

Metering for incoming:

Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A

& Hz , equivalent to EM6459, with CT as required.

Phase indicating lamps RYB with 2 Amps SP MCB back up.

80 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated

by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 0.8

Digitally signed by Rakesh

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. AMOUNT Rate without AMOUNT

(RS.) GST (RS.)

Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid

neutral link ):

ii. 20 nos 25A DP MCB 10 KA breaking capacity controlled by and including providing 40 DP MCCB,

40 A DP contactor and Timer.

NS-5.10 Feeder Pillar - X described as above and all as per specification. Set 1 # 1,44,559.32 1,44,559.32

NS-6 Supply, installation, Testing & commissioning of Octagonal G.I. poles with galvanised mounting nos # 11,186.44 0.00

bracket with required accesseries to accomodate street light fitting complete with base plate, finial

plug, bolts, nuts, junction box within the pole for incoming and outgoing cables (size up to 2 C x 6

Sqmm) and a 10 amps SP MCB and screws as specified in type HM1107 P - 9.0 mtr. Long.

Bottom diameter- 150 mm Top diameter- 75 mm Nos of foundation bolts- 04 PCD of foundation

Bolts- 240x240 mm Bolt diameter- 16mm Rate shall included the cost of inbuilt junction box

(weather proof), (6- 32A) MCB to fitting with 2.5 sq mm copper wires (2 Nos. 2.5 Sq.mm copper

wire for phase & 1 No. 1.5 Sq.mm copper wire for earthing) complete with base plate made from

concrete civil foundation works . The pole shall be painted with final PU Paint as required. 9.0 m

long pole with double arm for mounting the light .The work shall include all civil and allied work

complete in all respect as per direction of engineer in charge

9.0 m long pole with single arm for mounting the light .

NS-7 SITC of Volleyball Electronic LED metal rectangular remote operated Score Board with IP 66, set 0 # 29,661.02 0.00

requisite stand etc, complete in all respect as per direction of Engineer in charge

NS-8 Supply, installation, testing and commissioning of Acreylic signage as per the subject matter to be sqft # 2,245.76 0.00

written as finalized/ directed by client/NBCC with requisite support frame/handing arrangement

including proper illumination (lights to be fixed within the letter), with necessary screw, accessories,

electrical wire connection, switch, plug etc. complete in all respect as per direction of Engineer in

charge(minimum 02 years replacement warranty shall be provided by the LED backlid manufacturer

as per the list of make of material)

20) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing 6332.20

masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre Set 2 12,664.41

long etc. with charcoal/ coke and salt as required.

21) Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories 0.00

and effecting proper connections.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including 598.31

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. Metre 40 23,932.20

b. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth RM 22 43.22 950.85

DSR-2022- electrode, including connection/ termination with GI thimble etc. as required.

DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

INTERNAL WIRING

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor

1.30 single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI

box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

2 1.54 switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/

recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required

3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

c) 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 10.00 362.71 3,627.12

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

4 1.31 recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular Each 4.00 404.24 1,616.95

switch, connection etc. as required. (For light plugs to be used in residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

5 1.32 recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps Each 2.00 496.61 993.22

modular switch, connection etc. as required.

FANS & LIGHT FIXTURES:

1 NS-6 Supply, installation, testing & commissioning of 4 FT TUBE LIGHT Each 2.00 # 677.97 1,355.93

LED Surface mounted (Light Emitting Diode) for system power 12W, luminous flux of 1200 lm,

CRI> 80, 230V constant current driver, colour temperature of 5700K or more direct light emission,

in die-cast aluminium, polyester powder coat applied over a 5-stage pre-treatment,

Protection class I , IP 20 or more

Supply installation testing and comissioning LED Tube, Wall / Surface / Celling Mounted,

10W(MIRROR LIGHT), luminous flux of luminaire 900lm, IP 20,1200mm, Direct light emission,

230V, Electronic Control Gear, 5700K, Satin Diffuser, L=600mm (Min)

10 NS-9 Supply, Installation, Testing & Commissioning of exhaust fan Each 4 # 1,144.07 4,576.27

Digitally signed by Rakesh

Name of Project : Basketball court

Name of Work : Plumbing Works

S. No. Description of Item Unit Qty DSR 2023 Rate

2023/MR DSR Amount NSR Amount

A Sanitary Installations & Internal Water Supply

2 17.31 Providing and fixing 600x400mm mirror of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

4 DSR-17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge. Each 2 876.95 1753.90

6 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete,

including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

8.00 ,18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.49.1 15 mm nominal bore Each 2 429.49 858.98

9.00 ,18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

18.53.1 15 mm nominal bore Each 5 486.69 2433.47

18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

150 mm diameter Each 2 188.43 376.86

10.00 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass

waste of standard pattern, including painting of fittings and brackets, cutting and making good the

walls wherever require:

17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap:

11.00 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : Each

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 6 279.07 1674.41

12.00 NS-1 Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws Make

Euronics, Cat. No. EC02 or approved equivalent. Each 4.00 307.69 0.00 1230.76

13.00 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular

plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

14.00 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum

distances of 37 mm from wall face with concealed fittings arrangement of approved quality and

colour, weighing not less than 88 gms Each 2 196.57 393.14 -

15.00 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance

from wall of standard shape with bracket of the same materials with snap fittings of approved

quality and colour, weighing not less than 105 gms. Each 4 142.67 570.68 -

16.00 17.50 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with

white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders

with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including painting of fittings and cutting and making good

the walls and floors wherever required

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 1 10230.30 10230.30 -

B Soil, Waste, Vent & Rain Water Pipes

20.00 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat

of neat cement, rounding the edges and making and finishing the outlet complete.

21.00 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams. Each 2 46.36 92.71

22.00 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and down gauge). Cum 4 6676.69 26706.78

23.00 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain, soil & waste water pipes conforming

to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes..

23A NS Providing and fixing of uPVC Waste pipes 6 kg/cm2 (IS: 4985:2000) including with all fittings e.g.

couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement as per

Manufacturer's specifications complete including cutting holes or chases in wall and making good

the same wherever required. (For Indirect waste/ Wash Basin/Urinal/Sink/Floor Drain

24.00 12.42 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592

Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

12.42.1 Coupler

Digitally signed by Rakesh

S. No. Description of Item Unit Qty DSR 2023 Rate

2023/MR DSR Amount NSR Amount

12.42.3 Single tee with door

12.42..4 Single tee without door

26.00 NS-6 Providing and fixing UPVC, P or S trap of self cleaning design with / without vent arm setting in

cement concrete 1:2:4 mix complete including cost of cutting & making good the wall and floors

wherever required.

110 mm inlet & 110 mm outlet Each 2 331.36 0.00 662.71

27.00 NS-7 Providing and fixing in position 110x75 mm dia Upvc Nahani Trap(floor Drain) including fix to floor

with cement mortor. Each 2 127.97 0.00 255.93

28.00 NS-8 Providing and fixing SS grating of approved quality and colour.

Circular type 125 mm nominal dia Each 4 497.46 0.00 1989.83

29.00 NS-9 Providing and fixing floor cleanout plug, fixed to UPVC Pipe with solvent joint complete in all

complete including cutting and making good the walls and floor wherever required

30.00 NS-10 Providing and fixing in position 110 mm dia Vent Cowl complete in all respects

C Internal Water Supply

31.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 10 340.30 3402.97

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 24 439.62 10550.85

b 18.7.5 40 mm nominal outer dia .Pipes. Metre 10 595.72 5957.20

32.00 ,18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 35 455.59 15945.76

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 7 531.57 3720.97

34.00 Fire DSR - 18.8 Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required :

d DSR Fire- 32 mm dia nominal bore

f DSR Fire- 50 mm dia nominal bore

35.00 DSR-18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement

:4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover

fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10

graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per

standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1 1688.64 1688.64

38.00 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.1 25 mm nominal bore Each 1 527.46 527.46

18.17.2 32 mm nominal bore Each 2 584.41 1168.81

18.17.4 50 mm nominal bore Each 2 870.04 1740.08

39.00 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

18.19.4.2 50 mm nominal bore Each 1 1224.70 1224.70

40.00 NS 11 Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball inside

PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all

a 15 mm nominal bore Each 2 322.03 0.00 644.07

b 20 mm nominal bore Each 1 421.19 0.00 421.19

42.00 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

18.18 complete :.

a 18.18.3 25 mm nominal bore Each 2 393.26 928.10

3.0 External Sewerage System

44.0 DSR-2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets,

and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the

excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering, etc. and disposing of

surplus excavated soil as directed, within a lead of 50 m :

a 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 25 298.43 7460.81

Digitally signed by Rakesh

S. No. Description of Item Unit Qty DSR 2023 Rate

2023/MR DSR Amount NSR Amount

45.0 DSR-2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,

but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).

a a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 8 379.01 3032.07

46 ,19.4 Fixing SW Gully Trap Grade A Complete CI Grating, brick masonry chamber and water tight CI

cover frame of 300 x 300 mm size (inside) square mouth traps or "P" or "S" Type Traps.

47 ,19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone

aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm

nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per

standard design :

a (A) Inside size 90×80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610

mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 Each 2 10822.50 21645.00 0.00

50 DSR-19.6 Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with

stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing

of joints etc. complete. (for storm drainage)

a 19.6.2 150 mm dia RCC pipe Metre 25 471.23 11780.72

b 19.6.3 250 mm dia RCC pipe Metre 0 762.54 0.00

51 DSR-19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size) up to haunches of RCC. pipes including bed concrete as per

standard design :

a 19.3.2 150 mm dia RCC pipe Metre 25 629.75 15743.64

b 19.3.4 250 mm dia RCC pipe Metre 0 861.78 0.00

52.00 19.21.1 Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4

graded stone aggregate 20mm nominal size) cement plastered on both sides with cement

mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete for pipes 100 to 250mm dia. EACH 1 686.82 686.82

4.0 Storm Water Drainage System

53.0 DSR-2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets,

and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the

excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering, etc. and disposing of

surplus excavated soil as directed, within a lead of 50 m :

2.0 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 144 298.43 42974.24

55.00 DSR-19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4

(1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame

complete as per standard design

19.27.1 With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 Each 8 5049.07 40392.54

56.00 19.21.1 Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4

graded stone aggregate 20mm nominal size) cement plastered on both sides with cement

mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete for pipes 100 to 230mm dia. EACH 1 686.82 686.82

External Water Supply and Pumps

57 DSR - 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing

of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge. (

18.9.4 32 mm nominal outer dia Pipes Metre 20 371.69 7433.90

61.0 NS- 12 UG tank Filling Pumps Pump set

Providing, fixing, commissioing and testing package vertical tank filling pumps, comprising of

Electrical Driven inline pumping with all accessories, Pumps shall be with C.I. Base, S.S 304,

impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on

400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel

baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with

plaster with dunlop cushy foot mountings with all accessories such as NRVs, valves, pressure

guage bourden type, common suction and delivery header, bellows on sucton and delivery side

complete in all repsects.

Pumps shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C supply & shall be having the

following requirement complete with foundation and associated civil works.

Suction & Delivery Header - SS 304

Control Valve On suction and Delivery - Ball Valve Only (No Butterfly Valve Accepted).

Flow Prevention - Only Check Valve

Suction & delivery header including all pipes, suction & delivery sides valves, NRV, Pressure

gauges & accessories complete.

1 No. 32 amps TP + NL MCCB with the following accessories:

1 Nos 25 Amp. TPN MCB of breaking capacity 10KA

Flow Rate : 1.0 LPS (1 working + 1 stand by)

Digitally signed by Rakesh

S. No. Description of Item Unit Qty DSR 2023 Rate

2023/MR DSR Amount NSR Amount

Total C/F to Summary 3,27,612.79 42,150.25

Digitally signed by Rakesh