Renovation of Existing High Mast/Street Lights from Toll Post upto Fish Point and Shifting of SonmargSteet lights from Sonmarg Market to Sonmarg Village including Cabling

(Street-Lighting Illumination)

Shifting of existing 11 Mtr Octagonal Pole b.w.o uninstallation,shifting to new proposed locations and re-installation on new foundation by utilizing the service of Sky Lift Machine (SOP to be Followed)

Providing and laying of 11 Mtr Octagonal Pole Cement Concrete pole block of size ( 2ʹ x 2ʹ x 4ʹ)having 3ʹ U/G & 1ʹ A/G including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job) with Following Procedure & All as per pre approved by Engineer in charge:- A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness D) Reinforcement for R.C.C. work with MT bars including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting, propping etc. and removal of form work for Footing and Pedestal F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations. G) Providing and Laying Reinforce cement Concrete of M-25 grade In footing and Pedestal including Curing the foundation for 7 days. H Providen and Fixing Nuing Angle 40 mm x 40 mm x 6mm With 2 no. 100 mm long, 10 mm dia. Lugs On Pole as approved by site incharge.

Supply & Fixing of Foundation bolts set (04 N0.) for an 11-meter octagonal pole as per sample including PCD of existing pole.

Supply, Installation, Testing and commissioning of IK08, IP 66 protected 200 Watt LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each. The System efficacy ≥=125 Im/wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety, Power Factor >0.95 driver Efficiency >85% ,THD(l) <10% Humidity 10% to 90% RH Working Temp-SC to 45C. driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened, CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV Internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures, (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. Philips/Wipro/LT/Crompton/ Equivalent Make & shall be approved not less than by SDO. The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department.

Wiring in 3x1.5 Sq. mm 3-Core flexible, PVC insulated, round sheathed and annealed bare multi stranded copper conductor withstand voltage up to 11 KV. Polycab/Havells/RR-Kabel/Equivalent Make for service connection wires from bottom to top of the pole. (Complete in all respects).

Supply/Fixing/Testing and Commissioning of 6 Amp to 10 Amp Rating ,240v,*C* Curve 10K,SP Miniature Circuit Breaker suitable for inductive load and to be fitted in existing poles Complete with connections includes its thimbling (L&T/Siemens/Legrand/ABB /Schneider Make)

Providing of Pole Earthing Using 20mm G.I solid rod to be inserted in ground included with 20mm wide G.I strip in one run from Top of the earthing rod upto bottom of the pole duly fitted with necessary nut bolts complete job

Supply/Excavation/Laying/Testing and Commissioning of 4-Core 10 mm sq. Al armored PVC cable withstand voltage of 650/1100V ISI Marked. Havells/Polycab/RR-Kabel/KEI/Paramount Make. IIncluding Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (01 Ft below ground level) including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping.

Supply/Excavation & Laying of GI Pipe (A-Class) of 04 inches dia with ISI Marked for Road cut and refilling of same with cement concrete. (For Road Crossing)

Supply/Fixing of 32-63 Amp 4-Way in and 4-Way out Terminal Block/Connector Bottle/Pin type depending upon site conditions of standard make.Further the job includes Supply/Fixing and Crimping of 10 Sq. mm aluminium lugs,cable thimbles at termination of the cables/ends including providing of insulation tapes.

Design/Supply/Installation/Testing and Commissioning of CPRI Approved LT feeder panel (3+1) Al. bus bar of cubical type vermin proper Double door lockable outdoor type fabricated out of 14/16 SWG MS Sheets powder coated weather proof, dust proof with IP 65 protection with 4 legs stand of 2.5 feet height/ground clearance properly grouted in Cement Concrete base b.w.o raising the concrete jacketing (01x01) ft below & Above ground level and 08 inch of dia in 1:3:4 ratio, filter with baby insulators/glands/thimbles suitable for use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects complete in all respects with following :- Incoming: 63 Amp-4 pole TPN of C-Curve 10k of ABB/L&T/Legrand/Schneider/Equivalent make as approved-01 No. Outgoing: 100 Amp Suitable Al. Bus bar,Suitable Astronomical Timer with contactor.