Repair and Renovation of House No.20, 22, 23, 25 and 29 in the Doctor Colony in the campus of Civil Hospital at Ambala City in Ambala District

Amount

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (HSR 13.3) Profile B (HSR 13.3.1) Fixing with adjustable lugs with split end tail to each jamb (HSR 13.3.1.1)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well atched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (HSR 12.36) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (HSR 12.36.1)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (HSR 12.7) Second class teak wood (HSR 12.7.1) 35 mm thick shutters (HSR 12.7.1.1)

Providing and fixing 15 mm C.P. brass tap (B1239)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (HSR 22.10) Kitchen sink without drain board (HSR 22.10.2) 610x510 mm bowl depth 200 mm (HSR 22.10.2.1)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (HSR 22.1) White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (HSR 22.1.1)

Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required ::(HSR 22.24) W.C. pan with ISi marked white solid plastic seat and lid (HSR 22.24.1)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(HSR 9.57) 110 mm diameter (HSR 9.57.2)

Providing and fixing 25 mm thick shutters for cup board etc. : (HSR 12.25) Panelled or panelled & glazed shutters : (HSR 12.25.1) Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws (HSR 12.25.1.1)

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : (HSR 12.32) 35 mm thick shutters (HSR 12.32.1) With ISI marked stainless steel butt hinges of required size (HSR 12.32.1.2) (HSR 12.32.1.2.1)

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (HSR 11.96) New work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (HSR 11.96.1)

Painting over the wooden/metal surface with aluminium paint of approved brand and manufacture to give an even shade. (HSR 11.84) Two or more coats on new work (HSR 11.84.1)

Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade :(HSR 11.71) Two or more coats on new work. :(HSR 11.71.1)

Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and grills excluding the cost of MS framework but including the cost of nut bolts, Welding rods complete in all respect as per direction of Engineer-in-Charge. (HSR 13.20)

Providing and Fixing of HDHMR Cup Boards complete in all respect.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.(HSR 12.50) Fixed to steel windows by welding. (HSR 12.50.1)

Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (HSR 30.51)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (HSR 10.63) Size of Tile 600x600 mm (HSR 10.63.2)

15 mm cement plaster on the rough side of single or half brick wall of mix :(HSR 11.6) 1:6 (1 cement: 6 fine sand) (HSR 11.6.2)

White washing with lime to give an even shade : (HSR 11.61) New work (three or more coats) (HSR 11.61.1)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately). (HSR 12.1) Second class teak wood (HSR 12.1.1)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (HSR 12.9) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading (HSR 12.9.8)

12 mm cement plaster of mix : (HSR 11.5) 1:4 (1 cement: 4 fine sand) (HSR 11.5.3)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (HSR 30.54) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (HSR 30.54.2)

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner. (HSR 28.43)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)

Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.(HSR 12.52)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(HSR 22.22) White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(HSR 22.22.1)

Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any: (HSR 30.53) Panelled or panelled & glazed shutters : (HSR 30.53.1) Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (HSR 30.53.1.1)

Providing and fixing 15mm C. P. brass swan neck tap (one way) (B1093)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete.(HSR 12.88)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (HSR 12.78) 250x10 mm (HSR 12.78.1)

Satish Kumar Contractor