SPECIAL REPAIRS TO SECURITY OFFICE AT VIJAYANAGAR GATE AT NAVAL DOCKYARD, VISAHAPATNAM UNDER GE (I) DM, VISAKHAPATNAM.

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in backing coat to skirting complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square or rectangular) of area exc 0.18 but n.exc 0.38 Sq.m in floor set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for coloured glazed ceramic tiles 450X300X7/8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on walls/Ceiling etc including racking out joints hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and using WPC at the rate of 3% by weigth of cement complete all as specified and directed. Note : WPC will be paid separately

M&L rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

S&F anodised aluminium snap grid frame work of size 605 x 605mm using main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm) and wall angle of size 40mm x 25mm x 2mm ( weight not less than 0.36 kg / Rm) and 10mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, in ceiling with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete , including cover fillets complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

All as per item No. 17.00 above, but not exc 1.5 Sqm each

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for factory made 2nd class hard wood 35mm thick plain framed panelled shutters (two panelled ) with lock rails and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.

Forming jambs etc, to opening in brick masonry, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete new work, built in cement mortar 1:6 complete all as specified and directed.

S&F mild steel as in bands, straps, supports or stays for rainwater, entilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specifeid and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in anchoring hold fast, bed plates etc complete all as specified and directed.

S&F stainless steel hinges 100mm long, medium weight, cold rolled and fixed to wooden or steel framed complete all as specified and directed.

S&F 200mm stainless steel tower bolt medium weight, cold rolled and fixed to wooden or steel framed complete all as specified and directed.

S&F 125mm stainless steel handles, medium weight, cold rolled and fixed to wooden or steel framed complete all as specified and directed.

S&F 250mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete (thickness of powder coating of any colour not less than 50 micron) all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

M&L 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F aluminium 4 levers Mortice lock, vertical type, size 100mm size complete all as specified and directed.

Providing and fixing factory made UPVC white colour sliding window exceeding 2.00 Sqm. Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding mesh sash (42mmx57mm), sliding interlock (One vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2 +, - 0.2mm thick galvanised steel frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm), sliding mesh sash(26mmx10mm) profile to be inserted in required profile,frame will be fixed to the wall with 8 mmx100mm long fasteners, Hardware (touch lock of zinc alloyed (white powder coated), steel roller system. Stainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aprature 1.40mm and required accessories complete. Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

All as per item No.38.00 above. but not exc 2.00 Sqm each complete.

S&F for aluminium decorative grill of DG -102 complete all specified and directed.

S & F in repair door closer (aluminium die cast body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F roller blinds including hanging arrangement made up of anodised aluminum channel with acrylic mechanism with bottom weight type 3 Vista level all as per manufacturer instructions including taking down the existing unserviceable roller blinds complete all as specified and directed.

Demolition of textile covering and including all padding concrete over RCC slab over roof, including removal of waste material away from Dockyard premises complete all as specified and directed

M&L Providing, cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in roof padding concrete and kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per Sqm including cleaning of surfaces complete all as speicified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) shall be laid over entire roof surface and on vertical surface up to groves with other laps of 100mm. The over lap shall be sealed by flames complete all as specified and directed.

M&L bitumastic gola filling in crumple joints , with 80/25 buitmen and coarse sand mixture 1:3 by weight 8cm x 8cm at junction of roofing to vertcal surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs set in CM 1:6 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for chipping & removal of existing damaged, cracked, spalled & loose portion of concrete of the RCC members (20mm to 50mm thick) completely till the reinforcement is exposed and sound concrete is observed by using mechanical means and manual chisels and further the surface is jetted with clean water for removal of dust and loose particles complete all as specified and directed.

M&L for preparation of exposed surafces of rusted steel reinforcement with metal wire brush,cleaning the rusted surfaces free from loose rust and applying rust remover cum passivator (Sika Rustoff 100 @ 0.20Kg / Sqm or any other equivalent approved make of E -in -C's branch) on surface of existing reinforcement with brush to the rusted reinforcement, removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and throughly washed with water with the help of pressure jet and allowing surfaces of steel it to dry complete. Note:- Area of cleaned reinforcement steel bar shall only be considered for payment.

M&L for preparation of surfaces or steel of reinforcement by cleaning throughly and providing , mixing and applying zinc anti-rust agent as per manufacturers method of application to rebar corrosion protection system to reinforcement ( Sika / Fosroc/BASF/ Dr sunanda) @3.75Kg/Sqm surface of steel reinforcement in two coats complete all as specified and directed.

M&L for applying a coat of Polymer modified cementious bonding coat on the concrete surfaces with one part of Styrene Butadiene Rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemicals or equivalent chemicals manufactured by Sika India Pvt Ltd / Choksey Chemicals Pvt. Lt with four parts of water and six parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed.

M&L for applying polymer modified, cementitious mortar fibre reinforced, single component shrinkage controlled, (Renderoc SP40 of Fosroc Make or equivalent in Sika / Choksey) having a compressive strength of 40 MPA strength for reparing of RCC members like columns, Beams / Slab soffits etc. complete all as specified and directed.

M&L for application of polymer modified reinstatement mortar 20mm thick in isolated places of repair works of RCC members with Rendroc S2 of M/s Fosroc make or equivalent in Sika / Choksey having a compressive strength of M40 grade complete all as specified and directed.

S & F for 2000 ltr capacity rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks exc 1000ltr but n exc 2000 ltr and removing to store complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over one coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying two coat of distemper oil emulsion over one coat of primer over 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as specified and directed.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply fix in repairs Viterous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain(or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed.

S&F in repairs of Vitreous China half stall uniral, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repairs urinal spreader of chromium plated push type with PVC pipe of 15mm bore as required complete all as specified and directed.

S & F in repairs Vitrous China urinal partition white of size 310x700mm complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc and fixed in repairs complete all as specified and directed.

S&F in repair PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer complete all as specified and directed.

Taking down GI tubing 15mm dia with all connection complete all as specified and directed.

All as per item 74.00 above, but 25mm dia.

S & F 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all specified and directed.

S & F 25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S & F in repairs fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore dia of pipe bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair 25 mm dia Gun Metal globe or gate valve with iron wheel head screwed both ends for Iron Pipe and fixed in repairs complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches completed all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius all as specified and directed.

M&L for 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for Cast iron floor trap of 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

M & L for 110mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal With access door completed all as specified and directed.

S&F waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals complete all as specified and directed.

S&F in repairs grating round of size 100mm dia, chromium plate complete all as specified and directed.

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick in cement concrete type C2 1:3:6 (Using 40mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all specified and directed.

M&L for cement concrete 1:4:8,type D-2 (using 40 mm graded stone aggrigate) as in filling in sunken floors complete all as specified and directed.

M&L for 40mm thick cement concrete type 'B-0' 1:2:4 using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound finished even and smooth with using extra cement complete all as specified and directed.

M&L for applying one coat of hot blown bitumenous for sunken surface complete all specified and directed.

S&F in repair health faucet chromium plated with CP pipe of 1.4m long with jet spray with PVC chord and connector complete all as specified and directed.

S&F in repair wall mounted stainless steel (gde 304) toilet paper holder with flap of weight not less 300 gms complete all as specified and directed.

S & F in repair stainless steel (Gde 304) soap dish of size 120mm x 120mmx55mm with weight not less than 300gms complete all as specified and directed.

S&F in repair chromium plated tubular towel rail D Type of 20mm dia bore and 600mm long complete all as specified and directed.

S&F in repair corner glass shelf of 5.0mm thick sheet glass of 300 radius with chromium plate bracket guard and railing with alumium alloy bracket complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thicknes in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including round edging and marking anti skid cutting lines with cutters on treads, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Complete removal of existing treatment on walls and M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces with one coat of birla putty complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

[SCHEDULE 'A' PART-II [E/M WORKS]

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keeping or for taking credit (Credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc.,

Taking down old unserviceable DBs and main switches along with MCBs and MCCBs complete all as specified and directed.

M&L concealed point wiring with 1.5 Sqmm (Nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with PVC conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bed etc) complete fixed to walls etc with and including 1.5 Sqmm (nominal area) PVC insulated stranded single core unsheathed FRLS copper cable as earth point including supply & fixing of galvanized pressed mild steel Modular terminal boxes of suitable size as require for fixing modular switch socket regulator etc complete for one light point controlled by one one way switches complete all asspecified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floor complete all as specified and directed.

All as per item No. 3.03 above, but one fan point controlled by one 5 Amps switch one way.

All as per item No. 3.03 above, but one 3/5 pin 5 Amp switch socket outlet on independent board.

All as per item No. 3.03 above, but one 3/5 pin 5 Amp switch socket outlet on same board.

Supply & fix modular type switch 5 Amp oneway flush type all as specified and directed.

S&F modular socket outlet 2 in 1,3 pin 5 Amp all as specified and directed.

S&F modular cover plate with support plate for 3 modules with anodised metal boxes all as specified and directed.

S&F modular coverplate with support plate for 8 modules with anodised metal boxes all as specified and directed.

S&F modular bell electric AC 240 volt, 50 HZ. incl dismantling taking down unsv one all as specified and as directed.

S&F modular bell push piano type one way 5Amp, 240 volt incl dismantling taking down unsv one all as specified and as directed

M&L concealed point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with PVC conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc) complete fixed to walls etc with and including 2.5 Sqmm (nominal area) PVC insulated stranded single core unsheathed FRLS copper cable as earth continity wire connecting to common earth point including supply & fixing of galvanized pressed mild steel Modular terminal boxes of suitable size as require for fixing modular switch socket regulator etc complete for one 6 pin 16 Amp Socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors complete all as specified and directed.

S&F 5/15 Amps modular switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed.

S&F ceiling rose,3 phase /PVC/ polycarbonate,isolated body all as specified and directed.

S&F modular electronic 5 step fan regulator 120W all as specified and as directed.

Supply & fix LED recessed full open 2 x 2 feet with highly efficient light smoothy optics to deliver superior illuminous and energy saving of 36 watts complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note :-Ceiling rose is exclusive of the quoted rate.

S&F SP MCB 6 to 32 Amps C Curve complete as specified and directed.

S&F TPN MCB 63 Amps C Curve complete as directed

S&F MCB distribution board suitable for MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismentling taking down unsv one all as specified and directed.

S&F MCB, Double Pole, 32 Amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismentling taking down unsv one all as specified and directed.

M & L for concealed wiring with 2 runs of 2.5 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 2.5 sqmm FRLS grade PVC insulated copper conductor wire for earch continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories ,all as specified and directed. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate Note : (i) Two runs of 2.5 Sqmm single core cable,one run of 2.5 Sqmm earth wire to be measured as one length. (ii) Chase cutting and making good to walls, floors shall be inclusive of the quoted rate.

M & L for concealed wiring with 4 runs of 10 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 2 x 10 sqmm FRLS grade PVC insulated copper conductor wire for earch continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories all as specified and directed. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate Note : (i) Four runs of 10.0 Sqmm single core cable, two run of 10.0 Sqmm earth wire to be measured as one length. (ii) Chase cutting and making good to walls, floors shall be inclusive of the quoted rate.

M & L for concealed wiring with 2 runs of 6 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 6 sqmm FRLS grade PVC insulated copper conductor wire for earch continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories all as specified and directed. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate Note : (i) Two runs of 6.0 Sqmm single core cable, one run of 6.0 Sqmm earth wire to be measured as one length. (ii) Chase cutting and making good to walls, floors shall be inclusive of the quoted rate.

Supply and fix 220V AC, 50HZ, single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps all as specified and directed.

Supply and fix LED building security light 60 W IP 66 rated including supply and fixing with 40mm dia medium grade GI pipe bracket 1.5 mtr long bent to shape, mounted on pole/wall with suitable clamps nuts and bolts and all accessories complete including connection with 3 core PVC insulated sheathed flexible cable with multistranded copper conductor cable from ceiling rose to fitting terminal including taking down old unsv one all as specified and directed.

Taking down of exhaust fan upto 450 mm dia from wall, dismmanting complete fan assy, removing of motor and taking out for rewinding to civil workshop outside dockyard, complete rewinding with super enamelled copper wire as per existing size, heating, varnishing replacement of both end bearing and complete assemble of motor, transport been to ND(V), complete assemble of exhaust fan,fixing to orginal position, testing commisioning complete including painting to complete fan assy all as specified and directed.

M&L for servicing & Rewinding of Ceiling fan size upto 1400 mm sweep after opening complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings / capacitor pad / connector block, connection wire 3 core, assemble of rotor and stator unit with capacitor, connecting wire, capacitor pad, down rod, blades complete including painting to complete fan assy all as specified and directed.

Taking down of Wall mounted fan upto 450 mm dia from wall, dismmenting complete fan assy, removing of motor and taking out for rewinding to civil workshop outside dockyard, complete rewinding with super enamelled copper wire as per existing size, heating, varnishing replacement of both end bearing and complete assemble of motor, transport been to ND(V), complete assemble of exhaust fan,fixing to orginal position, testing commisioning complete including painting to complete fan assy all as specified and directed.

S&F LED tube light fitting with LED tube, 2'long, 10 watt, CDL, 230 Volts , complete with all accssories internally pre wired incl taking down unsv FTL/CFL fiitings all as specified and directed.

M&L earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32x6 mm by means of nuts, bolts check nuts, washers of galvanised iron or steel all as shown in electrical plate No:5 of SSR Part I connected to earth test point including excavation work with precasted PCC earth pith chamber and cover with GI protection pipe 40 mm dia light gde upto 7.5 mtr/20 mm dia tunnel pipe med grade but all as specified and directed.

S&F LED engagement light Red & Green including taking down unsv one complete all as specified and directed.

M&L for removing of Lightining conductor strip from Roof/wall and refixing with new saddles and screws for fitting the strip all as specified and as directed. Note: Distance between 2 saddles should not be more than 1M.

BHASKARA RAO CONSTRUCTIONS

VIJAY VINAYAKA INFRA

RAGHU RAMA PANDA

Eastern engineering Enterprises

SREE HANUMAN ENTERPRISES

SINGH BUILDERS

SRI SIMHADRI COMPANY

sai ganesh enterprises