Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.3 LAccepted-AOC S O SH PURAN CHAND VILLAGE BAI NAL P O KAMAND SUB TEHSIL KATAULA DISTT MANDI H P | MANDI | HIMACHAL PRADESH | 175001 | ₹11.3 L | L-1 | Accepted-AOC L-I BIDDER |
| 2 | L-2₹13.1 LRejected-AOC 245 6 LOWER DHALPUR KULLU DISTT KULLU H P 175101 H P | KULLU | KULLU | HIMACHAL PRADESH | 175101 | ₹13.1 L | L-2 | Rejected-AOC L-II BIDDER |
| 3 | L-3₹14.4 LRejected-AOC | ₹14.4 L | L-3 | Rejected-AOC L-III BIDDER |
| 4 | L-4₹14.7 LRejected-AOC VILLAGE KALEHALI PO BAJAURA THE BHUNTAR DISTT KULLU HP | BHUNTAR | KULLU | HIMACHAL PRADESH | ₹14.7 L | L-4 | Rejected-AOC L-IV BIDDER |
| 5 | Rejected-Technical 82 10 POST OFFICE ROAD MANDI HP | KANGRA | HIMACHAL PRADESH | 175013 | - | - | Rejected-Technical All Terms and condition Not fulfilled |
Updated dates
Tender Value
₹14.0 L
EMD Value
₹13,980
Closing Date
18 Feb 2026, 2:00 pmClosed
Sr. XEN ED Manali
Office of Sr. XEN ED Manali
Tender for providing SOP to EV Charging Station of M/S Ankur Petroleum at Baragran Bihal under ESD, HPSEBL, Katrain on turnkey basis.
2026_HPSEB_128275_1
HPSEBL/EDM/NIT-48/2025-26
Open Tender
Electrical Works
60 days
Katrain
Please refer Tender documents.
8 documents required · 8 mandatory
₹590
₹13,980
7 Apr 2026
12 Feb 2026
18 Feb 2026
12 Feb 2026
18 Feb 2026
12 Feb 2026
Equipments and switchgear:- (HT Line)
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
Poles, HT cable, CABLE ACCESSIORIES, KITS & Conductor:-
Steel tubular Pole 10Mtr Long supplied by HPSEBL-
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size)
Insulators:-
Supply of 11KV Disc insulator
Supply of 11KV pin insulator
Cable HT:-
Supply of 11KV HT Ab Cable 3X95+95mm2 i/c of all accessiories
Supply of End termination kit for AB cable 3x95+95mm3
Fittings and accessories :-
Supply of Anchoring Assembly for HT
Supply of Suspension Assembly for HT
Supply of Façede Hook for HT
Stay Sets:-
Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.
Stay Wire:-
Supply of Galvanized Stay wire Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)
EARTHING:-
Supply of Earthing set suitable for HT line made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
2800 mm long
600 mm long
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
2800 mm for G.O. Switch and D.O. Fuse Unit
Supply of Cross Bracing set suitable for 11 KV made of only TATA/SAIL/Rashtriya ispat M.S. Angle Iron of size 65X65X6 mm having length of 1.1 mtrs.
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
Supply of Aluminium Paint & Red Oxide for all poles and steel fitting
Erection Part:-
Erection of GO switch on tapping/Line structure
Erection of dropout (D.O.) explusion type fuse units on tapping/Line structure
Erection of steel tubular pole 10.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)
Erection of AB cable
Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)
Equipments and switchgear:-(Distribution Transformer)
Steel tubular Pole 10Mtr Long supplied by HPSEBL-
Design, engineering, manufacture, inspection, testing and delivery of ISI marked, non-sealed, oil immersed, ONAN type, 50 Hz. double wound, 3-phase- 11/0.433KV, 250 KVA, outdoor type distribution transformers, for use in power distribution system.
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
Supply of 9kV, 10 kA Porcelain Station Surge Arresters complete with accessories for 11KV system
Supply of LT Distribution Panel Box suitable for 250KVA S/Stn. made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated pained complete with 1 no. MCCB ( 1 main ) Rating 160Amp, Duty Circle 0.3 Sec, Rating Symmetrical breaking capacity 35kA, Service Breaking Capacity 100% KIT KAT 200Amp make L&T/Havells/C&S/HPL/Schneider
Poles, HT cable, CABLE ACCESSIORIES, KITS & Conductor:-
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size)
Insulators:-
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm
Cable LT:-
Supply of LT Cable300mm2 PVC (1.1kV,3.5 C, Al, Un-Armour)
Stay Sets:-
Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.
Stay Wire:-
Supply of Galvanized Stay wire Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)
EARTHING:-
Supply of Earthing set suitable for Substations made of GI pipe 38 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 3000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. Bottom end of the pipe shall be weilded with MS Plate of Size 300x300x6mm.
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
2800 mm long
460 mm for supporting of main channel of CTPT/DTR
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
2800 mm for G.O. Switch and D.O. Fuse Unit
Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
2800 mm for supporting LA, LT Distribution Panel Box
750 mm for Single Pole 2Nos Per set
950 mm for GO switch handle
Supply of MS Angle Iron 35x35x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 35x35x6 mm, suitable for fixing on 11kV Steel double pole structure with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 2.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
460 mm for DTR unit belting & knee bracing
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
Supply of Half Clamp (MS Flat 50x6mm)
Supply of Full Clamp (MS Flat 50x6mm)
Supply of Aluminium Thimbles suitable for LT cable 400mm2
Supply of Aluminium Thimbles
Supply of LT switched capacitors 81kVAr for 250KVA DTR
Supply of Aluminium Paint & Red oxide for all poles and steel fitting
Erection Part:-
Erection of 250KVA , 11/0.433KV DTR complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muffs , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 2 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire & painting complete in all respect
Civil Works (Foundation of DTR) :-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:- all kind of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 gradedstone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete.
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Supplying and stacking at site:- Bajri Spreading of stone aggregate 20 mm thick.
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
technical_189526.pdf
techsummary_189526.pdf
finance_189526.pdf
BOQ Comparative Chart
xlsx
finsummary_189526.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
BOQ_189526.xls
BOQ • 0.34 MB
SBD48.pdf
Tender Documents • 2.99 MB
Download all tender documents and submit your bid