Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹4.1 L+₹15,465.99 (3.95%)Rejected-AOC NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-AOC 2nd lowest | |
| 3 | L3₹4.2 L+₹31,557.67 (8.05%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest | |
| 4 | Rejected-Technical 2ND FLOOR C O MSA INSTRUMENTS 18 NETAJI SUBHAS ROAD KOLKATA WEST BENGAL 700001 | KOLKATA | WEST BENGAL | 700001 | - | Rejected-Technical insufficient papers |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
25 Nov 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply delivery and installation of flow meter and with others allied works for Augmentation at KASHIPUR w/s scheme under Purulia Mechanical Division, PHE, Dte. in the Purulia District.
2022_PHED_419229_3
15/ EE/PMD/PHED OF 2022-2023
Open Tender
MECHANICAL
Item Rate
60 days
Purulia
Please refer Tender documents.
6 documents required · 6 mandatory
₹10,000
Yes
23 Mar 2023
4 Nov 2022
28 Nov 2022
4 Nov 2022
25 Nov 2022
4 Nov 2022
Amount
PART A
Supply delivery of 200 mm dia. Electromagnetic flow meter shall be Microprocessor based with advance diagnostic capabilities & HART communication protocal with have digital memory, and satisfactory of following specification a. For Sensor :- Principle of flow meter : Electro-Magnetic Induction, Type remote mounted, Lining material PTFE, Electrode material SS3116L, Grounding : 02 nos grounding electrodes, Empty pie Detection : Inbuilt, Coil housing Die-Cast Aluminium, Flange MOC/Rating : SS/Flange ANSI /ASME B16.5/16.47 series B class 150, Sensor Memory : Digital memory for all csalibratioin & configuration data, Sensor size 300mm length, Accuracy + 1.4% of the flow rate, IP-68 protection class, Medium temp. limit :0-80°C, Measurement of flow Bi-directional, Conductivity Required : >5 µs/cm, Installation condition : Upstream(10D) & Downstream(5D) (Straight Section), Accordig to EN 29104, Vibration level : 10-58 Hz range, Max. deflection 0.15 mm. Specification for Transmitter:- Display : fully configurable graphical LED with capacitive Touch keys, Output : 1 Current output (active or passive), 2 Digital output (Passive), HART, Calibration : Unique self calibrating transmitter (patented) for the ultimate stability and repeatability, Power Capacity : Universal switch mode power supply, DIP Switch : Three configuration DIP switchs are mounted on the transmitter backplane Board, Transmitter Housing : Powder - coated aluminium with glass window,single compartment , Protection class : NEMA 4X, IP-67, Power supply : 100~264 V AC, 50Hz Power supply through cvt, Cable length 10mtr, Cable entry " 1/2" NPTF, Language : English, Temp Limiptation : -20~60°C.
Supply delivery of 200mm dia MS dismantling joints PN 1.6 ratings with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts.
Installation and commisioning of above supply flow meter with all accessaries as MS dismantling joints, strainer etc and rate are also included for cutting pipe, welding charge, washer etc. as per requirement of site and all completed the works as per direction of EIC.
Construction of different dia Sluice valve /Air valve/Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified] i) 80 mm to 150 mm dia pipe.
Add GST @ 18%
Add CESS @ 1%
COMBINE ENTERPRISES
TAPAN KUMAR DEY
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .