C/O Sub Division Bajaura building/Quarters in tehsil Bhuntar Distt. Kullu H.P)( 2022-306-257)

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm. layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Random Rubble Masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortor 1:6 ( 1 cement : 6 sand) complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:-

In foundation footing bases of columns etc and mass concrete complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

In Columns, pillars, post and struts Square, rectangular or polygonal in plan Square, rectangular or polygonal in plan complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Edges of slab and breaks in floors and walls under 20 cm wide.complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

In foundation footing bases of columns etc and mass concrete complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

In Colunms pillars posts and struts upto floor two level complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

In Lintels, beams girders bressumers and cantilevers upto floor two level complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Brick work using common burunt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1 cement : 6 sand) (Ist class brick) complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1cement : 4 sand) (Ist class brick) complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position. (Ist class deodar wood)complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing 40x3 mm iron hold fast 40 cm long including fixing to frame with 10 cm dai bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size).complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (Ist class deodar wood)complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.

Stone /boulder filling behind retaining wall also under floor etc.complete in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.