DAY TO DAY MAINTENANCE REPAIR AND REPLACEMENT OF JOINERY CUPBOARDS WATER SUPPLY PIPELINES PLUMBING AND SANITARY FITTINGS PLASTERING FLOORING TILING CLEANING OF WATER TANKS ETC AND OTHER ALLIED WORKS AT OFFRS RESIDENTIAL AREA ORA UNDER AGE BR I AT INA

(ii) The contractor or his representative shall collect daily list of complaints from MES complaint cell or from concern JE and shall attend all the complaints in the same day irrespective of number of complaints received. Contractor shall employ sufficient tradesmen accordingly as per requirement. However minimum one plumber and carpenter shall be made available throughout working hours to attend emergency complaints. The rates quoted by the contractor shall be deemed inclusive of cost against supervisor, all tradesmen / labours employed, conveyance required for collecting complaints and attending at site for all items of BOQ. (iii) Contractor shall employ skilled / experienced tradesmen and workers for execution of work. (iv) Contractor or his representative shall submit compliance report of complaints on the same day with receipt / job card duly signed by the users to concern JE. Contractor may use separate register for each category of complaints and obtain signature from users after repair / rectification of complaints received and submit the same during preparation of RARs to concern JE. (v) All critical complaints related to water supply and complaints which posses safety hazards to occupants have to be rectified within 24 hours after receipt of complaints. In case of complaints are not rectified on same day, the contractor shall submit in writing to Engineer-in-charge with valid reasons / justifications for delay and however the same shall be rectified with in 2 working days. Otherwise a recovery of Rs 500 per complaint shall recovered from the contractor. (vi) All unserviceable materials, debries, waste material scrap etc. obtained during repair work other than such of credit materials issued to the contractor shall be removed immediately from site and disposed off at dumping locations earmarked with in the INA premises at no additional cost to the Govt. The cost of labour, transportation etc. shall be deemed included in the rates quoted by the contractor against respective BOQ items and nothing extra shall be paid.

Material & labour for applying two coats of Smart care damp proof of Asian Paints by roller/brush over a coat of primer with smart care damp proof 33 % dilution of Asian paints including preparation of existing WALL surface by complete removal of existing treatment by means of chipping the surface to remove loose particles and mortar and clean the surface with wire brush and water wash etc including filling & coving with smart care repair mortar (wherever required), filling of crack filler with smart care crack filler of Asian Paints (wherever required) complete all as per manufacturer’s instructions, all as specified and as directed by Engr-in-Charge. (Make : Asian Paints Smart care Damp proof).

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead all as specified and as directed.

Material & labour Glazed ceramic coloured tiles in patches 300x200x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed.

Material & labour Glazed ceramic coloured tiles 350x250x7mm /450x350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed.

Material & labour coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in CM 1:6 all as specified and as directed.

Material & labour machine cut granite stone slab 20mm thick of approved colour and shade as in floors, kitchen platform, steps and other similar situations over and including 15mm thick backing coat in CM 1:4 laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing all as specified and as directed.

Rounding to edges of stone slabs to one edge, such as in kitchen platform, steps and other similar situations all as specified and as directed.

Cutting of granite stone for fixing kitchen sink complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings exc 15 cm thickness above ground level) all as specified and as directed.