Construction of terminal building to Hellipad at Richali (Khopuan) in Tehsil Dharampur

Amount

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

In flat surfaces such as soffits of suspended floors, roofs, landing and the like floor upto any thickness upto all floor levels.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in nall depth /height not exceeding 1 (one) metre depths upto all floor levels

In edges of slabs and breaks in floors and walls in any floors width/ height upto all floor level.

Providing and laying damp proof course 38mm (Thirty eight milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty oblique hunderd) or equavalent using 1.70 Kg (one decimal seven zero kilogramme) per square metre on damp proof course after cleaning the surface with a piece of colth lightly socked with kerosen oil including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (One cement:six sand : twelve graded crushed stone aggregate 40( forty )millimetre nominal size and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:3:6 (One cement: three sand: six graded/crushed stone aggregate 20mm (Twenty millimetre) nominal size as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:3:6 (One cement: three sand: six graded/crushed stone aggregate 40mm (Twenty millimetre) nominal size as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls including attached buttresses, pilasters and their caps and basis and string courses etc. upto floor two level. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals:The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and laying mechnical mixed and and vibrated reinforcement cement concrete of grade M-20 (M-twenty) design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per milimeter per square) with minimum cement contents 340Kg (three hundred forty Killogramme) per Cubic metres and curing complete excluding the cost of form work in cill of window wall including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and laying tor steel made of SAIL, TATA TISCO reinforcement for reinforced cement concrete work including bending, binding straightning and placing in position complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Brick work second class using common burnt clay building bricks in Super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1cement: 4 sand) 2nd Class Bricks and curing complete in super structure above plinth level upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement: six sand : Twelve graded/crushed stone aggregate 20mm (twenty millimetre) nominal size at plinth level in cement mortar 1:6 (one cement : six sand) and curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Stone work ashler punched((ordinary work) in super structure uptofloor two level in cement mortar 1:2 (1 Cement 2 Sand) including pointing with cement mortar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position 1st class Kail wood including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to bemeasured and paid for separately )25 (twenty five) millimetre thick including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 12mm (Twelve milimetres) thick prelaminated board both side( bwp phenol bonded exterior/interior grade) Action Tesa, Make panelled shutters with frames of Ist class deodar wood for doors including bright finished/ black enamelled iron hinges with necessary screws 40mm ( Forty milimetres ) thick frame including carriage of materials within all leads and lifts and other incidentials charges.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rustfree, straight, mitred and jointed mechanically where ever required including cleast angle,aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge.

For doors windows and ventilatiors and glazed partitions frames.

For shutters of doors windows & ventilator including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paidfor separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc.complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 5.50 (five point five zero ) millimetre thickness (weight not less than 13.75 (Thirteen point seven five )kilograme per squaremetre including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 12 ( twelve ) millimetre thick prelaminated board both side bwp phenal bounded exterior/interior grade panelled shutters with frames of 1st class deodar wood for doors inclduing bright finished/back enamelled iron butt hinges with necessary screws 40mm thick frame.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming toIS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-ChargeI/c making good the floors.

Providing and fixing 19(Ninteen) millimetres thick termite resistant water proof Commercial Board confirming to IS- no.1659 of NOVAPAN , ARCHIDPLY, ACTION TESA,GREEN,NATIONAL,KITPLY make in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

250x10mm (Two hundred fifty into ten millimetre)

100x10 mm (one hundred into ten millimetre)

Providing and fixing aluminium handles anodized transparent of approved quality with necessary screws etc. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

125mm (one hundred twenty five milimeters)

100mm (one hundred milimeters)

Providing and fixing 150(One hundred fifty) millimetres bright finsihed hard drawn hooks eyes brass including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing bright finished brass casement window faster with necessary screw etc complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing bright finished casement stay (stright) type withnecessary screw etc complete. 200 (two hundred ) millimetre weighting not less than 0.27 (zero point two seven ) kilograme including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 100 ( one hundred ) millimetre bright finished brass floor door stoper with rubber cushion screws etc o suit with shutter thickness complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing Ist mark pull bolt look anodized including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing ISI mark 150x125x27x2.80 (One hundred fifty into one hundred twenty five into twenty seven into two point eight zero ) millimetre oxidized MS presses premelatry hinges complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Steel work welded in built up sections (TATA/JINDAL/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In grating, framed guard bars ladders, railing brackets and similar works including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .

Providing and laying 25mm (Twenty five millimetres) thick kota stone 55x55cm (Fifty five into fifty five centimetres) minimum size having one shade only alongwith Jaiselmer yellow marble brands 7.5 (Seven point five) wide as per pattern to detail. Which shall be mirror polished in flooring tread of steps, landings mirror polished of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. and curing complete including carriage of materials within all leads and lifts and other incidentials charges.

Providing and laying 20mm ( Twenty milimetres ) Baroda Green marble work ( Table rubbed and polished ) in flooring 20mm ( Twenty milimetres ) thick Which shall be mirror polished in flooring tread of steps, landings mirror polished of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:3 ( One cement : three coarse sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge.

Providing and fixing 10mm (Ten millimetres) thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco/Kazaria / 1st. quality 600x600mm (Six hundred into six hundred millimetres) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge.

Providing and laying 50(Fifty) millimetres thick Cement concrete flooring 1:2:4 (one cement : two sand:four graded stone aggregate 20 (twenty)millimetres nominal size)laid in one layer finished with a floating coat of neat Cement including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

15mm (Fifteen millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three sand) upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Applying Birla white wall care putty over plaster surface after thourghly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scored with wire brushes fine steel wool scrapers and san paper complete with ready mixed priming paint brushing red lead, red-oxide/zinc oxide chrome.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat) on new steel and other metal surfaces either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, enamel paint other than white including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed drybrick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality,GST or other taxes imposed by the Govt.

Providing plinth protection protection 50mm thick in cement concrete 1:3:6 (1 cement :3 sand :6 graded stone aggregate 20mm nominil size) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Constructing Course rubble hammer dressed 'U' shape opensurface drain with side wall.15x22 cm in cement mortar 1:6(1 Cement : 6 Sand) and insideplastring with cement plaster 1:3 (1 Cement:3 Sand)including earth work and laying 10 cm cement concretein 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cmcement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of GST or other taxes imposed by the Govt.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium Grade) tube fitting and clamps of BST Jindle (Hissar) TATA Steel tubes ltd. Parkash Surya as per IS code including making good the wall ceiling and floor including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

15mm ( Fifteen millimetres) nominal bore.

20mm ( twenty millimetres) nominal bore.

Making connection of galvinized steel distrubution branch with galvanized steel main 20mm to 40mm nominal bore by providing and fixng the includingfitting of connecting the pipes complete

Providing and fixing 1000 (one thousand) litre net capacity tank PVC water storage tank of Sintex make (I.S.I. 12701 marked tripple layer) 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and vantilating pipe Finolex having working pressure not less then 4kg/per square meter including fixing with aproved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing PVC plain bend ISI MARKED including fixing with approved adhesive etc, complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing PVC single equal plain ISI Marked inclding fixing with approved adhesive etc.complete.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing PVC double equal branch wih owl access door,insertion rubber washer 3m thick bolt andnuts ISI marked complete inclding fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing PVC Coller ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing PVC door plain bend ISI marked including fixing with approved adesive etc.complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

75mm(Seventy five milimetres) nominal size.

110mm (One hundred ten millimeter) nominal size.

Providing and fixing 110mm (One hundred ten millimeter) nominal size. PVC cowl with approved adhesive including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

Providing and fixing PVC floor trap ISI marked of self cleaning design incluidng fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete .110mm x 90mm ( one hundred ten into ninety ) millimetre including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

Providing and fixing Vitreus China wash down water closet (Europian type WC pan) with integral P or S Trap including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement : One Sand) including carriage of materials with in all leads, lifts and other incidentilas charges including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government..

Providing and fixing 10/12.5/15 litres vitreous pvc low level flushing casteran with a pair of PVC or mild steel brackets complete with fitting such as lead valve less sypan 15 mm nominal size brass base valve with polygohone flow PVC brass handle unioures and couplings for connection with inlet outlet and over flow pipes 40 mm dia. G.P. flush bind including cutting holes in wall and making good the same and connecting the flush bend with cistern and closet over flow pipe to be measured and paid for separately including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government...

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. (II) Hollow type (a). Black or white plastic seat and cover including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Providing and fixing G.I.inlet connection for flush pipe with W.C pan made of Unik, KS, AMCO, AVR, NVR, RR, SUW make including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing flat back 630mmx450mm (six hundred thirty into four hundred fifty millimetres) vitreous china wash basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings of Hindware/Parryware /CERA ,Sanitary ware, including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 610x460mm with bowl depth 200mm stainless steel kitchen sink of diomand quality approved standred ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding the fitting.of Hindware/Parryware /CERA ,Sanitary ware, including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two millimetre) diameter rubber plug for sink/ wash basin including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing C.P. brass waste for wash basin or sink.32mm ( thirty two millimetre)dia including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 100 mm ( one hundred millimetre ) dia chromium plated grating including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing CP brass towel rail made of Jaguar, JAL, ESSess complete with CP brass brackets fixed to wooden plugs with CP brass screws 750 x 20mm (Seven hundred fifty into twenty millimeters) including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing CP brass soap dish of Jaguar with brass bracket fixed on wooden cleat complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt. .

Providing and fixing C.P. brass bib tap made of Jaguar, Essess, JAL with capstan head , (a)15 mm (fifteen millimetre)dia. including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing CP Brass pillar tap made of Jaquar JAL, ESSESS. with capstan head 15mm (Fifteen millimetres) dia of including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass stop cock made of Jaquar JAL, ESS ESS. including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt. .

Providing and fixing brass angle valve 15mm ( fifteen millimetre ) without nuts and pipe including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimeter) bevelled edge mirror made of ATUL, MODI, GUARD superior glass mounted on 6mm (six millimeter) thick including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing PTMT jet spray made of Prayag quality and colour complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover with frame total weight 58 Kg (fifty eight) for manhole for frame of internal dimension 500 mm(five hundred) millimetres rectulanger Cast Iron cover (Light duty single seal pattern-I) total weight of cover to be not less than 58Kg (fifty eight kilogramme) and frame not less than 15.00 (Fifteen) Killogramme including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and including other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Govt.

Providing and fixing high pressure PVC spigot and socket, waste ISI marked i/c including fixing with aproved adhesive etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, GST or other taxes imposed by the Government.

75 milimeters dia

110 milimeters dia

Sh. Bihari Lal