Loading
Loading…
Loading…
Tender Value
₹82.8 L
EMD Value
₹1.7 L
Closing Date
12 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
HQ/MAINT
16 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-IX (Form for Contractual Turnover Data) of this tender document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Repair or Retro fitment or AMC of M&Ps in steel Melting Industry
15 conditions · 5 needing a document upload
Tenderer/Bidder is required to submit duly filled and signed Annexure-IV (Details of Works Completed) of tender document (Asked vide SubPara-7.1.6 of Para-7 of Chapter-3 of tender document).
Tenderer/Bidder is required to submit duly filled and signed Annexure-V (Details of Works in hand) of the tender document (Asked vide SubPara-7.1.7 of Para-7 of Chapter-3 of tender document).
Tenderer/Bidder is required to submit all the documents in support of their firm constitution/composition/form type as detailed at Para-30, 31 & 32 of Chapter-3 of tender document (Asked vide SubPara-7.1.5 of Para-7 of Chapter-3 of tender document).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bidder shall be required to deposit Bid Security of requisite value along with the Bid for the due performance with the stipulation to keep the offer open till such date as specified in the Bid, under the conditions of Bid. Tenderer(s)/Bidders are allowed to make payments against this tender towards Bid Security only through payment modes available on IREPS portal or as specified at Para-11 of Chapter-3 of Tender document.
Bids not accompanied with Bid Security, in the requisite manner, shall under no circumstances be entertained and will summarily be rejected at the time of opening itself without further reference to the bidders.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIII (Form of Bank Guarantee Bond for Bid Security) of the tender document and shall be valid for a period of 90 days beyond the bid validity period.
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security subject to submission of Registration Certificate issued by appropriate authority.
Labour Cooperative Societies shall submit only 50% of above Bid Security subject to submission of supporting document along with bid.
Repair/Servicing and Complete Overhauling of Roll Overs (04 nos.), Special purpose cranes (06 nos), Pouring Crane (01 no.), Hub Cutting Machine (03 nos.) Cope Cleaner, Drag Cleaner, Tube Pre-Heat Furnace, Tube Holding Furnace, Bucket Elevator-1&2, Belt Conveyor-1 and Modification work for wheel Clamping arrangement of Hot Wheel Transfer Crane, Clamping arrangement of V-plough above baking station and cope Centering arrangement at dome baking-1&2 of Mould Room at RWP-Bela
MROT-5-2025
MROT-5-2025
Open
Works - General
120 Days
Saran, Bihar
₹0
₹1.7 L
12 Mar 2026
17 Feb 2026
26 Feb 2026
35 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 82,79,951.7 | ||
| — | 4.00 | — | — | ||
| Repair/Servicing of Roll Overs (CTC, CTA, CTA-1 & DTA) in Mould Room at RWP/Bela as per scope of work | — | — | — | 4,73,904 | |
| — | 4.00 | — | — | ||
| Modification and Rewiring of the Roll Overs Hose pipe arrangements from existing single hose pipe to double separate hose pipe for power and control wirings as per scope of work | — | — | — | 3,10,999.52 | |
| — | 1.00 | — | — | ||
| Repair/Servicing of Special purpose Cranes (CDC, MSC & HWTC) in Mould Room at RWP/Bela as per scope of work | — | — | — | 7,80,460.7 | |
| — | 1.00 | — | — | ||
| Repair/Servicing of Pouring Crane in Mould Room at RWP/Bela as per scope of work | — | — | — | 5,18,332.5 | |
| — | 1.00 | — | — | ||
| Repair/Servicing of Hub cutting Machines(01 Set consists 03Nos) in Mould Room at RWP/Bela as per scope of work | — | — | — | 5,28,205.5 | |
| — | 2.00 | — | — | ||
| Repair/servicing of Cope Cleaner & Drag Cleaner in Mould Room at RWP/Bela as per Scope of work | — | — | — | 3,15,936 | |
| — | 3.00 | — | — | ||
| One time repair and Refractory Attention of Tube Pre-Heat Furnace (TPF-03 Nos.) in Mould Room at RWP/Bela | — | — | — | 8,88,570 | |
| — | 2.00 | — | — | ||
| Relining of Refractory of Tube Holding Furnace (THF-02 Nos.) in Mould Room at RWP/Bela | — | — | — | 3,00,000 | |
| — | 1.00 | — | — | ||
| Repair/Servicing and Overhauling work of Belt Conveyor-1 (Length-23 Mtrs and Width-500mm) as per scope of work | — | — | — | 75,000 | |
| — | 1.00 | — | — | ||
| Repair/Servicing and Overhauling work of Belt Conveyor-C7 (Length-94 Mtrs and Width-700Mm) as per scope of work | — | — | — | 80,000 | |
| — | 1.00 | — | — | ||
| Re-lining of Refractory of Sand Dryer in Mould Room of RWP-Bela | — | — | — | 3,55,500 | |
| — | 2.00 | — | — | ||
| Mould Room annual maintenance - One time Repair/Servicing and Complete Overhauling of Bucket Elevator-1&2 in Mould Room as per scope of work. | — | — | — | 10,00,000 | |
| — | 100.00 | — | — | ||
| Supply of Belt for Bucket Elevator Belt Specification: - Ultra-Heat-Resistant Conveyor Belt Width- 230 mm 10 mm, Thickness- 10 mm 315/3 x 5 mm Top x 2 mm Bottom USHR Grade x 3 Ply Tensile Strength - 20 Mpa Open End Temperature - 200 Deg °C Make:- Modi or Continental belting | — | — | — | 1,40,000 | |
| — | 2.00 | — | — | ||
| Mould Room Annual Maintenance -Modification in V-plough Clamping Arrangement above Baking Station as per scope of work | — | — | — | 10,00,000 | |
| — | 2.00 | — | — | ||
| Modifications of Jaw Clamping Arrangement of Hot Wheel Transfer Crane as per scope of work | — | — | — | 1,00,000 | |
| — | 2.00 | — | — | ||
| Modification of cope Centering arrangement at Dome Baking-1&2 in Mould Room at RWP-Bela | — | — | — | 1,50,000 | |
| — | — | — | 12,63,043.48 | ||
| Service Tax (GST@ 18% on | Goods & | — | at SN-1 to SN-16) |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
E_TENDER_DOCUMENTMROT-5-2025.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .