Loading
Loading…
Loading…
Tender Value
₹70.6 L
EMD Value
₹1.4 L
Closing Date
20 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Non submission of supporting documents for eligibility criteria lead to summarily rejection of the bid.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: Raichur - Provision of Electrical Arrangements for Upgradation of Raichur Goods Shed Duly Dismantling existing H.L Platform.
GTL-EM-78-2025-26
GTL-EM-78-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.4 L
20 Mar 2026
25 Feb 2026
6 Mar 2026
131 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 70,61,086.2 | ||
| for details. | Item Breakup | — | — | ||
| Supply and transportation of 16M high mast shaft in two sections suitable for 50 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 16 nos luminaries in symmetrical arrangement as per the specification and Supply and transportation of raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are included) and Supply and transportation of 08 nos. of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. Erection, testing and commissioning of the high mast with the help of suitable tools and plants including fixing, testing and commissioning of luminaries, wiring of luminaires with all wiring materials as mentioned in the detailed specification. (Prior Drawing approval of Sr.DEE/M/GTL to be taken). | — | — | — | 22,76,910.72 | |
| for details. | Item Breakup | — | — | ||
| Designing & casting M-30 cement concrete foundation for high mast (1: 0.75: 1.5 ratio) suitable for 16 m high mast considering the safe soil bearing capacity atsite as per requirement up to 3 meter depth with 24 Nos. of 12 Tor, (T1), 24 Nos. of 10 tor (T2) in the base, 8 tor @ 190c/c) (T3) to wrap around T2, 24 Nos. of 10 tor (T4) in the base, provision of 1:4:8 PCC of 100 mm at the bottom of the foundation, including excavation in all types of soils, foundation erection of nut bolts etc in an approved manner. | — | — | — | 1,39,976.76 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of fencing panels at high mast structures location with size 2 m height as per the directions of the engineer at site. | — | — | — | 1,95,751.8 | |
| for details. | Item Breakup | — | — | ||
| Supply of LED type single dome aviation obstruction light. | — | — | — | 9,933 | |
| for details. | Item Breakup | — | — | ||
| Supply and erecting of outdoor stand mounted Feeder pillar for High mast of same manufacturer with 32A FP RCBO incomer, single dial timer switch 25A TP contactor for automatic switching of luminaries, 2 No 9A contactors and raise/lower push button and provision for termination of incoming minimum 35 sq.mm and outgoing minimum 16 & 25 sq.mm cables complete erected in min. 14 guage CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation in an approved manner. | — | — | — | 1,86,446.88 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of LED Flood light fittings of 200W with all connected materials as per attached Railway Specification conforming to IEC 60598-1 or its latest amendment. | — | — | — | 5,50,200 | |
| for details. | Item Breakup | — | — | ||
| Dismantling the 16 mtrs High mast with Hydra and refixing the same after repair including all connections including transportation. | — | — | — | 23,400 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098 (Part 1)1988 with latest amendments and with necessary lugs and terminations. | — | — | — | 5,29,240 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 3,62,000 | |
| for details. | Item Breakup | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1)1988 with latest amendments and with necassary lugs and terminations. | — | — | — | 3,56,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 50 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,20,000 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of 8 SWG GI wire with 40 GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 42,000 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench in all types soil of size of size 400 mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site. The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 7,521 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc., as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc. The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site. The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 4,30,080 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench in hard soil of size of size 400 mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 1,16,800 | |
| for details. | Item Breakup | — | — | ||
| Excavation of cable trench under the Track/Road below 3mtrs. horizontal drilling bore with Hydrallic Jack suitable size for provision of 160/110/50mm dia GI/HDPE pipe. | — | — | — | 86,280 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of HDPE pipe of 110 mm outer dia of PN4 class as per IS 4984- 2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 32,795.6 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 3,250 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 with necessary terminals suitable for cables upto 70 Sq mm and all necessary accessories complete. | — | — | — | 1,77,560 | |
| for details. | Item Breakup | — | — | ||
| Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the supply of suitable bolts with Bakelite Sheet with MCB (for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 3,67,472 | |
| for details. | Item Breakup | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq.mm with necessary lugs at the junction box and necessary termination at the luminaire complete. | — | — | — | 7,300 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant - Class F V-0 as per IS:11731 Part-II or V-0 as per UL-94. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 25,500 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of LED Street light fittings of 48 W with suitable driver with all connected materials as per attached railway specification (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) conforming to IEC 60598-1 or its latest amendments. | — | — | — | 1,41,000 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extension wires etc. for fixing) as per attached railway specification. | — | — | — | 3,579.88 | |
| for details. | Item Breakup | — | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 6,300 | |
| for details. | Item Breakup | — | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 11,854 | |
| for details. | Item Breakup | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 24,320 | |
| for details. | Item Breakup | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( up to 10 meters length) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 53,768 | |
| for details. | Item Breakup | — | — | ||
| Supply and run of 2 nos, 2.5 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 40,800 | |
| for details. | Item Breakup | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 30,800 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 1,756.63 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 867.15 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 or its latest amendment model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or similar to make including all other connected accessories complete. | — | — | — | 1,418.65 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 352.5 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessores complete. | — | — | — | 117.51 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 6,255 | |
| for details. | Item Breakup | — | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 3,600 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,230 | |
| for details. | Item Breakup | — | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make comprising of the following switchgear of make with all connecting accessories complete. | — | — | — | 12,960 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 17,489.5 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 16,989 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 5,548 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 63A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendments Cat.Nos: 811056 of Indoasian make or equivalent make with all connected accessories. | — | — | — | 15,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 20A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 6,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 6,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 6,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 6,900 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of 85A HGS Type 3 Pole Power Contactors, 415 V, 50Hz Conforms to IS / IEC 60947-4-1 of AC Coil with SMART ECM (Electronic Control Module) in-built with Finger proof IP20 terminals of Low VA Burden Wide operating band coils with Class H Insulation of Havell's Make Model No. IHPHA085400 or Equivalent make. | — | — | — | 1,33,651.52 | |
| for details. | Item Breakup | — | — | ||
| Supply of Diffuse mode photoelectric sensor, plastic housing, 1000mm adjustable detection range, red light, light/dark on, PNP output, fixed cable operating voltage 10 to 30 V DC, 3 wire, switching current: max.100mA, resistive load, Degree of protection: IP 67, Knobs: Flush type, Shape: Rectangular, Cable length: 2m. Make:PEPPRL & FUCHS or Equivalent Reputed Make. | — | — | — | 28,329.44 | |
| for details. | Item Breakup | — | — | ||
| Design, Supply, fixing connecting, testing and commissioning of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, dedicated for the High Power LED Based 16 W LED Pit/Catwalk Lights as per following Specification PANEL containing 3 nos of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21 Nos of Pit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260Volts, Output Voltage :24 Volts dc+/- 1% Regulation-C, Output Current: 10 Amps Each SMPS, Protection : Short Circuit Proof, Over Voltage Protection, Ripple:< 200mv including all accessories. Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with all connected accessories including cable connectors etc. | — | — | — | 1,85,040 | |
| for details. | Item Breakup | — | — | ||
| Supply, Running and Connectiong of 3 core 2.5 sq.mm. 1100V submersible Flat cable of make conforming to IS: 694 (2010) with its latest amendments. | — | — | — | 26,000 | |
| for details. | Item Breakup | — | — | ||
| Supply, Running and Connectiong of 3 core 6 sq.mm. 1100V submersible Flat cable of make conforming to IS: 694 (2010) with its latest amendments. | — | — | — | 52,000 | |
| for details. | Item Breakup | — | — | ||
| Supply and installation of 5.0KVA, 180 / 192V DC true online UPS system IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output confirming to IS:13314 for inverter. | — | — | — | 61,309 | |
| for details. | Item Breakup | — | — | ||
| Supply and Fixing of battery rack for 5 to 10 batteries (42 AH). | — | — | — | 3,623.4 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of 12V 26 AH SMF battery with 3 years Warrenty, including wire leads ,connections etc complete.,.Make: Quanta / Racket / Exide. | — | — | — | 23,189.76 | |
| for details. | Item Breakup | — | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU of Selec Make. | — | — | — | 4,624 | |
| for details. | Item Breakup | — | — | ||
| Supply, fixing, connecting and commissioning of Digital Timer to lighting with connected accessories of Reputed Make. | — | — | — | 21,830 | |
| for details. | Item Breakup | — | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 1,646.65 | |
| for details. | Item Breakup | — | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from CORE approved sources only, List of CORE approved sources is enclosed as Anneux-CORE List). | — | — | — | 8,438.3 | |
| for details. | Item Breakup | — | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GIpipe dia 50 mm | — | — | — | 807.5 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of Charcoal. | — | — | — | 2,515.5 | |
| for details. | Item Breakup | — | — | ||
| Supply and Erection of Salt. | — | — | — | 1,739.5 | |
| for details. | Item Breakup | — | — | ||
| Provision of RCC earth pit hollow box of size300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) It includes fixing of earth pits at various locations. Inspection by Consignee. | — | — | — | 4,349.3 | |
| for details. | Item Breakup | — | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site / location | — | — | — | 1,242.75 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 28,626 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Master Tender Document
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
EARTHINGCOMBINEDSPEC.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-78-2025-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .