Supply and Installation of 8Mtr Mini Mast Light System with 4 Nos. of 100W Led Flood Lights and 3 years warranty at various locations in Kunnamangalam LAC, Kozhikode

Amount

(a) Supply of 8 M Octogonal Pole Minimast shaft in one/Two section suitable for wind speed as per IS 875 Part-3, fixed head frame including round arm, luminaries carriage suitable to install 6/4 No luminaries in symmetrical arrangement, including connector, Foundation bolt and junction box etc (b) Construction of suitable shallow foundation with l:2:4 Concrete for the mini mast with reiforcement for RCC works, bend tied and placed in position (plain grill requiring bend cold ) using for steel including form work for reinforced cement concrete and excavation of soil including neat banking required.

Installation, Testing and Commissioning of 100W LED Flood Light luminaire supplied by SILK. Contractor should take delivery of LED Flood Lights from SILK stores. and also carryout all necessary replacement works during the warranty period of 3 years at sites.

Supply and installation of outdoor stand mounted feeder pillar suitable for full control of luminaries with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries 16sqmm and out going 16 & 2.5 sqmm terminals

Supply and providing pipe earthing as per IS 3043 with 3.60m long 40mm dia B class GI pipe,GI funnel with weld mesh,filling required quantity of charcoal & salt including construction of inspection chember with a bed concrete of 1:4:8 PCC using 40mm broken stone(10cm thick),brick work in cement mortar 1:6,plastering the surface of brick masonary and the exposed surface of PCC bed with cement mortar 1:4:,12mm thick,(the finished inside dimension shall be 300x300x300mm)but excluding test joint,earth continuity conductor to the pipe,and covering at the top(in ordinary soil)

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm G.I strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

2 x 25 x 3 mm GI strip

Supply and laying strips of the following sizes along with wiring/ cables and giving connection as required.

25 x 3 mm GI strip

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).

25 x 3 mm GI strip

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

25 x 6 mm GI bolt & nut

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.

Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only)

Colour washing, two coats

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

32 mm dia light gauge

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm GI conductor (10 SWG)

Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).

4 core 6 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

4 core 6 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

4 core 6 sq mm with factory made clamp

Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required.

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.

4sqmm-16 sq mm with thick clip

Supply of superior quality aluminium reducer (banana) cable socket and making core termination of cables of the following sizes including crimping etc. as required.

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Supply and fixing the following accessories in the existing meter board and giving connections etc.

32 A fuse holder for BS type blade fuses.

2 Way Neutral link

32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

S & F following HRC fuses

20-32 A, clip-on offset tag fuse link of size f1

Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories

50mm(for using KSEB service wire supporting )

Fabrication supply,conveyance and installation of angle frame iron for four sides of the mast for istalling name board of MLA with ACP sheet and reflecting sticker

KSEB Charge & P W D charges including all liason work

RAFEEQUE V.P.