Loading…
Loading…
Tender Value
₹50,000
EMD Value
₹1,000
Closing Date
3 Aug 2026, 4:00 pmClosed
EXECUTIVE ENGINEER WSMP DIVISION SGR
OFFICE OF THE EXECUTIVE ENGINEER WSMP DIVISION SGR
Providing of Water Connection from Darul Uloom to University under construction Chowkidar Quarter at Jammu University Campus at rakhi Arth Bemina (UNDER District CAPEX).
2026_PHE_316891_1
E-NIT No.13/WSMP of 07-2026 Date-20/07/2026
Open Tender
Civil Works - Water Works
Percentage
7 days
SRINAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹50
EXECUTIVE ENGINEER WSMP DIVISION SGR
₹1,000
Yes
20 Jul 2026
20 Jul 2026
4 Aug 2026
20 Jul 2026
3 Aug 2026
20 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
All kinds of soil : | - | Cum | - | - |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:1 meter from cutting edge. | - | Cum | - | - |
| 3 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.
i. 25mm dia. G.I. pipes. | - | Mtr | - | - |
| 4 | Providing, fixing of MS Fittings viz bends, tees, tail pieces etc. Of suitable degrees / size to be fabricated out of 8mm/10mm thick plate as per the requirement at site. This item also includes cost of lead, Spun yarn and lead caulking, lead beating with insertion of Spun yarn etc.. The fittings should be leak proof and should be painted with anti-corrosive red oxide primer and bituminous paint including all carriages, leads, lifts and cutting of pipes etc. Complete job. | - | kg | - | - |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. | - | Cum | - | - |
| 6 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
i. 25 mm nominal bore | - | No | - | - |
| 7 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
i. 25 to 40 mm nominal bore | - | No | - | - |
| 8 | Providing and fitting of pipe specials of reputed make (ISI marked). the item includes all types of labour, carriages, tools and tackles required for the job.
I. Elbow
a. 25mm dia | - | No | - | - |
| 9 | II. Unions
a. 25mm dia | - | No | - | - |
| 10 | III. Tee
a. 25mm dia | - | No | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
BOQ_1035994.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .