REPAIRS TO FOOT PATH ,COMPOUND WALL, DWARF WALL, FENCING AND GATE AT INS DRONACHARYA AND MES COLONY AT FORT KOCHI

Amount

Demolition of cement concrete in ground floor or any floor level, flooring and pavings not exceeding 15cm thickness (below or above ground level) all as specified & directed by Engineer-in-charge.

M&L for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm crushed graded stone aggregate as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.

M&L for 100mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate finishing cement concrete surface even and fair as in hard standing, path,sub base complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4 type B-1using 20mm graded stone aggregate in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound grade "A' complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed.

M&L for screed bed or bedding layer of mortar 1:6, 20mm thick for laying floor finishes, all as specified and directed.

M&L chequered Coloured pre-coated cement concrete tiles 30 cm x30 cm x 20 mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments.

M&L PCC 100 mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base.

M&L for 50 mm sand cushioning under interlocking tiles including spreading,levelling and consolidating etc; complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness,M-35 grade fixed with grey cement and no pigments complete all as specified and as directed.

M&L for forming construction joints 50 mm deep, 10 mm wide, filled with bitumastic filling the joints with mastic filling i.e one part of bitumen 85/25 and 2 parts of sand(1;2) by weight complete all as specified and as directed.

Demolition of precast concrete block walling,precast concrete articles,dressed stone work,ashlar facings built in cement mortar or cement lime mortar complete all as specified and directed by Engineer-in-charge.

M&L for precast cement concrete block masonry 1:3:6, type C1( 20 mm graded stone aggregate) with solid blocks exc.10cm in width and setting in cement mortar 1:6, complete, all as specified & directed by Engineer-in-charge.

M&L for Pre-cast cement concrete block masonry 1:3:6 type C1(20 mm graded aggregate)with solid blocks, 10 cm thick and setting in CM 1:6 complete, all as specified & directed by Engineer-in-charge.

M&L for 15mm thick rendering in cement and sand mortar 1:4 over brick or concrete surfaces finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. , all as specified.

S&F for MS framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

S&F for mild steel framed work as in doors or gates of angle or other section confirming to Fe-410W (Gde-E-250) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of VX-polymer based anti corrosive paint over a coat of anti corrosive primer complete all as specified and as directed.

M&L for providing cement concrete type B1 1;2:4(20 mm graded stone aggregate)as in kerbs,mud stops,plinth courses including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

WELTRONENGINEERINGSERVICES

K.V.GEORGE AND COMPANY

M/s S & S Enterprises/ Suresh Shivasankarapillai

SOORYA ASSOCIATES