Construction of New Sub Center for Intensive Cattle Development Program At.Kalyana, Ta.Siddhpur, Dist.Patan

Name of Work :-

Construction of New Sub Center for Intensive Cattle Development Program At.Kalyana, Ta.Siddhpur,

Bill of Quantity

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

1 210.00 Excavation for foundation upto 1.5 M. depth 128.79 Rupees One Hundred Cum

Twenty Eight And

including sorting out and stacking of useful Paise Seventy Nine

materials and disposing of excavated stuff up to Only

50M. lead.(a) Loose or soft soil

2 44.00 Excavation for foundation for depth from 1.5 m to 142.78 Rupees One Hundred Cum

Forty Two And Paise

3.0 m including sorting out and stacking of Seventy Eight Only

useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

3 7.00 Excavation for foundation for depth from 3.0 m to 193.57 Rupees One Hundred Cum

Ninety Three And

5.0 m including sorting out and stacking of Paise Fifty Seven Only

useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

4 121.00 Filling available excavated Earth (Excluding Rock) 137.47 Rupees One Hundred Cum

Thirty Seven And

in trench plinth side of foundation etc. in layer not Paise Forty Seven

excluding 20 cm in depth consolidation each Only

deposited layer by ramming and watering etc.

5 45.00 Filling in foundation and plinth with selected soil in 273.86 Rupees Two Hundred Cum

Seventy Three And

layers of 20cm. thickness including watering, Paise Eighty Six Only

ramming and consolidating etc. complete.

6 23.00 Filling in plinth with Sand under floor in layers not 429.24 Rupees Four Hundred Cum

Twenty Nine And

exceeding 20 cm incl. consolidatig each deposited Paise Twenty Four

layerby ramming and watering etc. complete Only

7 35.20 Providing and laying cement concrete 1:4:8 (1- 2,660.31 Rupees Two Cum

Cement : 4- coarse sand : 8- hand broken stone Hundred Sixty And

aggregates 40 mm nominal size) and curing Paise Thirty One Only

complete excluding cost of formwork in (A)

Foundation and Plinth

8 36.90 Providing and laying ordinary cement concrete 10,658.16 Rupees Ten Cum

1:2;4 and curing etc complete. including the cost Hundred Fifty Eight

of formwork but excluding cost of reinforcement And Paise Sixteen

for R.C.C. work in (A) Foundations, footings bases

9 17.07 Providing and laying ordinary cement concrete 10,658.16 Rupees Ten Cum

1:2:4 and curing complete including the cost of Hundred Fifty Eight

form work but excluding cost of reinforcement for And Paise Sixteen

reinforced concrete work in [A] Footing

10 4.70 Providing and laying ordinary cement concrete 10,658.16 Rupees Ten Cum

1:2;4 and curing complete including the cost of Hundred Fifty Eight

form work but excluding cost of reinforcement for And Paise Sixteen

reinforced concrete work in [B] Columns upto

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 1 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

11 6.80 Providing and laying ordinary cement concrete 10,658.16 Rupees Ten Cum

1:2;4 and finishing smooth with curing etc Hundred Fifty Eight

complete, including the cost of formwork but And Paise Sixteen

excluding the cost of reinforcement for R.C.C.

work in [C] Columns

12 6.20 Providing and laying ordinary cement concrete 7,665.60 Rupees Seven Cum

1:2:4 and finishing smooth with curing etc Hundred Sixty Five

complete, including the cost of formwork but And Paise Sixty Only

excluding the cost of reinforcement for R.C.C.

work in (D) Plinth Beam

13 7.00 Providing and laying ordinary cement concrete 7,665.60 Rupees Seven Cum

1:2;4 with curing etc complete, including the cost Hundred Sixty Five

of formwork but excluding the cost of And Paise Sixty Only

reinforcement for R.C.C. work in (E) Beams For All

14 1.20 Providing and laying ordinary cement concrete 10,219.39 Rupees Ten Cum

1:2:4 and finishing smooth with curing etc Hundred Nineteen

complete, including the cost of formwork but And Paise Thirty Nine

excluding the cost of reinforcement for R.C.C.

work in (F) Lintel & Cill For All Floor

15 0.50 Providing and laying ordinary cement concrete 10,219.40 Rupees Ten Cum

1:2:4 for RCC Chhajjas not exceeding 10 cm Hundred Nineteen

thicknesss up to floor two level including finishing And Paise Forty Only

exposed surface with cement mortar 1:3 (1-

Cement, 3 Fine sand) to give a smooth and even

surface with curing etc complete including the cost

of form work but excluding the cost of

reinforcement. [G] Chhajja For All Floor

16 9.20 Providing and laying ordinary cement concrete 9,542.05 Rupees Nine Cum

1:2:4 with curing etc complete, including the cost Hundred Forty Two

of formwork but excluding the cost of And Paise Five Only

reinforcement for R.C.C. work in (H) Slab For All

17 11630.00 Providing TMT Bar FE 550D reinforcement for 94.99 Rupees Ninety Four Kg.

And Paise Ninety Nine

R.C.C. work including bending, binding and placing Only

in position complete upto floor two level for G.F.

18 36.00 Brick work using common burnt clay building 3,708.98 Rupees Three Cum

bricks having crushing strength not less than 35 Hundred Eight And

kg./Sq.Cm. in foundation and plinth in Cement Paise Ninety Eight

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

19 97.00 Brick Work using Common Burnt Clay Building 3,997.64 Rupees Three Cum

Bricks having crushing strength not less than 35 Hundred Ninety Seven

Kg/sm. in super structure Above plinth level up to And Paise Sixty Four

floor two level in cement mortar 1:6 ( 1 cement :

fine sand) (B) Conventional

20 399.00 Providing 15mm thick cement plaster in single coat 188.98 Rupees One Hundred Sqm

Eighty Eight And

on Rough (Similar)side of single or half brick walls Paise Ninety Eight

for interior plastering upto floor two level and Only

finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand)

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 2 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

21 73.00 Providing 10mm thick cement plaster in single coat 141.92 Rupees One Hundred Sqm

Forty One And Paise

on brick/concrete walls for interior plastering upto Ninety Two Only

floor two level and finished even and smooth in(i)

Cement mortar 1:3 (1-cement:3-sand)

22 213.00 20mm thick sand faced cement plaster on walls 330.72 Rupees Three Sqm

Hundred Thirty And

upto height 10 metres above ground level Paise Seventy Two

consisting of 12mm thick backing coat of C.M. 1:3 Only

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete.

23 472.00 Applying two coats of Birla or Asian acrylic lapy 40.59 Rupees Forty And Sqm

Paise Fifty Nine Only

(putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth.

24 472.00 Wall painting (two coats) with Acrelic Asian Royal 88.39 Rupees Eighty Eight Sqm

And Paise Thirty Nine

touch or equvalent paint of approved brand and Only

manufacture on undecorated wall surface to give

an even shade including throughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

25 667.00 Wall painting two coats with weather proof acralic 122.14 Rupees One Hundred Sqm

emulsion APEX Ultima paint of approved brand & Paise Fourteen Only

manufacture and of required shade on exterior wall

surface to give an even shade over and including

a primery coat with alkaly resistance primer of

approved brand after throughly brushing surface

to remove all dirt and remains of loose powdered

materials etc comp. for all height.

26 31.00 Providing and fixing machine cut, free edges, 1,919.00 Rupees One Sqm

Mirror polished Granite Slab stone flooring 18 mm Hundred Nineteen

thick laid on 20 mm thick cement mortar 1:6 (1 Only

cement:6 coarse sand) for Trade & Riser including

Full moulding front edge of trade jointed with

matching pigment & cement slurry including

rubbing and polishing finishing etc. complete.

27 87.00 Providing and laying Vitrified tiles 8 to 10 mm thick 1,531.82 Rupees One Sqm

, 36''x 36'' in flooring treads of steps and landing Hundred Thirty One

laid on a bed of 12mm thick cement mortar 1:3 (1- And Paise Eighty Two

cement : 3-coarse sand ) finishing with flush

pointing in white cement

28 11.00 Providing and laying Ceramic tiles 6mm thick in 1,127.48 Rupees One Sqm

skrting risers of steps and dedo on 10mm thick Hundred Twenty

cement plaster 1:3 (1-cement : 3-coarse sand) and Seven And Paise

Forty Eight Only

jointed with white cement slurry Approved by

Architect or Engineer in charge

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 3 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

29 3.00 Providing and laying (30 x 30) cm Standard 1,017.30 Rupees One Sqm

Thousand Seventeen

Ceramic tiles 6mm thick in flooring treads of steps And Paise Thirty Only

and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement,Pattren, Colour

& Shade Approved by Architect or Engineer in

30 70.00 Providing and laying water proofing treatment 1,134.92 Rupees One Sqm

with chaina mosaic tiles flooring over avg 50 mm Hundred Thirty Four

C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 And Paise Ninety Two

to 12 mm size} bedding for maintaining slope for

plain and curve surface & 12 mm to 20 mm of

broken piece of ceramic / glazed tiles ( one or

more color as directed ) to be laid over cement

mortar bedding of C M 1:3 (1 cement : 3 sand )

contain one Kg of water proofing materials per bag

of O P C at plain or / and slops and to be tempered

to bring mortar ceramic up to surface with using

white cement and color pigment including rounding

of junctions and extending them up to 15 cm along

the wall and curing with bends any patterns or

design as per drawing and cleaning by using oxalic

acid etc complete.

31 8.20 Providing and fixing Door with Telephone Black 5,405.52 Rupees Five Sqm

Granite Flate Edge of frame and shutter with Hundred Five And

Double/Single shutter of factory made & stamped Paise Fifty Two Only

I.S 12823 grade one, type one 30 to 35 mm thick

solid core , melamine faced , three layered resin,

flushed door, having decorative lamination on both

sided and "U" type 2mm th. 35mm X 35 mm

specially shaped molded colored anodized

aluminium beading fixed around the

door,"novapan" or equivalent company holding

licence for minimum 5 years warranty including

cm long Stainless Steel pipe handle on both side

SS ASIS 304 Grade, SS Stopper 20 CM,SS Aldrop

30CM both side, SS Hinges 3No`s in each shutter

& fixtures & fastenings as directed by Engineer in

Charge, etc. complete.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 4 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

32 5.80 UPVC Sliding WindowProviding and fixing factory- 15,756.00 Rupees Fifteen Sqm

made uPVC Sliding Window of Fenesta, LG Hundred Fifty Six Only

Hausys, or Kömmerling make, System: SY21 –

Premium Slider, Design Code: 553, having an

overall size of 1500 mm (W) × 2050 mm (H),

comprising two sliding shutters (XiX configuration).

The window frame shall be manufactured from

multi-chamber uPVC sections of the approved

profile, and the shutter members shall consist of

top and bottom rails as per the manufacturer's

standard design. Each shutter shall be glazed with

6 mm thick toughened glass (SGTGH), securely

fixed within the sash using EPDM gaskets and

internal glazing beads. All frame and sash corners

shall be fusion welded and cleaned, with Foil 2S

Walnut finish on both sides. The complete window

system shall include stainless steel rollers,

interlock profiles, locking arrangement, handles,

and all other necessary hardware and accessories

as per the manufacturer's specifications, ensuring

smooth sliding operation, weather-tightness,

durability, and long service life. The item shall also

include careful removal and refixing of the existing

safety grill, complete with all necessary fittings,

33 0.40 Providing and fixing standard extruded of 8,585.00 Rupees Eight Sqm

alluminium section/Domal Section of size 63mm x Hundred Eighty Five

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. Only

0.643 Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick Bajari figured

adjustable Glass louvers of STD make as details

etc complete for Ventilation

34 1000.00 Providing, supplying, lowering, fixing and 10.10 Rupees Ten And Ltr.

commissioning Plasto Six Layer Super Cool

Double Foam Water Storage Tank with Stand,

rotationally molded from UV-stabilized, food-grade

virgin polyethylene, suitable for potable water

storage, complete with factory-fitted lid, inlet,

outlet, overflow and drain connections, mounted on

the manufacturer's approved stand, including all

accessories, jointing, testing and commissioning,

complete in all respects as directed by the

Engineer-in-Charge. Self Cleaning Water Tank

with 10 years of Make Guarantee

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 5 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

35 108.00 Providing, laying and jointing in true line and level 918.67 Rupees Nine Hundred Rmt.

Eighteen And Paise

110 diameter U.P.V.C SWR (Type B) Pipe Sixty Seven Only

conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size

mm diameter x 149 mm length x 145 mm height at

every 2000 mm centre to centre or shall be

concealed in walls as directed including necessary

fittings such as bends, "Y" "T" shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

materials.[i] 110mm dia

36 35.00 Providing, laying and jointing in true line and level 882.54 Rupees Eight Rmt.

Hundred Eighty Two

U.P.V.C. SWR Type B Pipe conforming to IS And Paise Fifty Four

13592-1992 with one end plain and other end Only

socketed with rubber ring, & fitting conforming to

IS 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using PVC Clamp of the size 160mm dia x

210 mm length x 196 mm high at every 2000 mm

centre to centre or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes, tees, etc. including testing of pipes

and joints and jointed with adhesive solvent

cement including cost of all materials(i) 160 mm

37 250.00 Providing laying and jointing in true line and level 195.67 Rupees One Hundred Rmt.

Ninety Five And Paise

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Sixty Seven Only

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.[i] 50mm dia

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 6 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

38 20.00 Providing laying and jointing in true line and level 148.12 Rupees One Hundred Rmt.

Forty Eight And Paise

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Twelve Only

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials. [i] 40mm dia

39 30.00 Providing laying and jointing in true line and level 91.84 Rupees Ninety One Rmt.

And Paise Eighty Four

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Only

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials. (i) 25mm dia

40 20.00 Providing laying and jointing in true line and level 72.62 Rupees Seventy Two Rmt.

And Paise Sixty Two

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Only

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C

or shall be concelled as directed including

necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.[i] 15mm dia

41 7.00 Providing and fixing Gun metal check or non-return 663.43 Rupees Six Hundred No.

Sixty Three And Paise

full way wheel valve.(E) 40mm / 50mm dia. Forty Three Only

42 2.00 Providing and fixing Gun metal check or non-return 420.63 Rupees Four Hundred No.

Twenty And Paise

full way wheel valve.(C) 25mm dia Sixty Three Only

43 1.00 Providing and fixing ball cock of approved. quality 189.84 Rupees One Hundred No.

Eighty Nine And Paise

as directed.(A) Copper Metal (ii) 50mm dia. Eighty Four Only

44 1.00 Providing and fixing wash down water closet 10,377.75 Rupees Ten No.

(European W.C. Pan) with integral P or S trap and Hundred Seventy

PVC dual flush tank with complete fittings including Seven And Paise

Seventy Five Only

cutting holes in walls and making good the same

connecting the flush bend with cistern and closet

etc. complete including plastic seat cover and

including jointing trap with Waste pipe overall size

as per the selection of the Model by E.I.C. or as

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 7 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

45 2.00 Providing & fixing of Wash Basin first quality Flat 2,403.80 Rupees Two No.

Back Size 550 mm x 400mm size. In white Hundred Three And

colour. including with approved sanitary grade Paise Eighty Only

material with C.P waste coupling, waste pipe,

15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc.

complete as directed by engineer in charge.

46 2.00 Providing and fixing pillar tap, capstan head, screw 354.69 Rupees Three No.

Hundred Fifty Four

down high pressure with screws, shanks and back And Paise Sixty Nine

nuts.(ii) 20mm dia. Only

47 2.00 Providing and fixing brass screw down stop tap (A) 205.83 Rupees Two Hundred No.

Five And Paise Eighty

15 mm dia. (Juqar, Plumber, ess like brand as Three Only

approved by engineer in charge)

48 2.00 Providing and fixing PVC SWR Nahni trap IS 614.19 Rupees Six Hundred No.

Fourteen And Paise

14735 for drain - 100 mm diameter with jali of the Nineteen Only

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

49 2.00 Providing and fixing S.W. gully trap with C.I. 1,292.19 Rupees One No.

grating brick masonary chamber and water tight Hundred Ninety Two

C.I. cover with frame of 300 mm x 300 mm size And Paise Nineteen

(Inside) with standard weight (I) Square mouth

traps (B) 150 mm x 100 mm size P of R type

50 1.00 Providing and fixing Jet spray to connect wall 308.99 Rupees Three No.

Hundred Eight And

mount w.c with 1.5 mtr long plc. heavy duty supply Paise Ninety Nine Only

pipe with two side male female checknut etc.

51 1.00 Providing and fixing C.P. brass towel rail complete 616.42 Rupees Six Hundred No.

Sixteen And Paise

with C.P. Brass brackets fixed to wooden plugs Forty Two Only

with C.P. Brass screws, (B) 600mm x 20 mm size

52 1.00 Providing and fixing 600mm x 450mm Bevelled 859.41 Rupees Eight No.

Hundred Fifty Nine

edge glass mirror of superior glass mounted on And Paise Forty One

6mm the A.C. sheet or plywood sheet & fixed to Only

wooden plugs with C.P. brass screws and washers.

53 1.00 Providing and fixing in position PVC cowel went to 75.75 Rupees Seventy Five No.

And Paise Seventy

pipes.(C) 160mm dia Five Only

54 1.00 Providing and fixing in position PVC cowel went to 50.50 Rupees Fifty And No.

Paise Fifty Only

pipes.(B) 110mm dia.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 8 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

55 2.00 Constructing brick masonry chamber for under 7,180.44 Rupees Seven No.

ground C.I. Inspection chamber and bends with Hundred Eighty And

bricks having crushing strength not less than 35 Paise Forty Four Only

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light

duty) 455 mm. X 610 mm. Internal dimensions,

Total weight of cover with frame to be not less than

38 Kgs. weight of cover 23 Kg. and wt. of frame

Kg) R.C.C. top slab with 1:2:4 mix (1 cement :

coarse sand : 4 graded stone aggregate 20 mm.

size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls & abed

concrete etc. complete.(ii) Inside dimensions,

mm. x 700 mm. and 450 mm. Deep for pipe line

with one or two inlets.

56 64.00 Applying general insecticide pest control treatment 91.63 Rupees Ninety One Sqm

And Paise Sixty Three

to floors, cupboards etc including labour material Only

etc. complete. Using Lamidacloprid 30.5 SC. as

Per 6113 part -II Consentration Weight (0.075%

By mass) is recommended 10.5 ml Chemical

diluted with 5 Liters of water application 0.5 liter

chemical/Sqm of surface is recommended as per

57 8.00 Providing and laying (Two level or slopes) and 411.52 Rupees Four Hundred Rmt.

Eleven And Paise

jointing with stiff mixture or cement mortar in Fifty Two Only

proportion 1:1, salt glazed stone ware pipes

including testing of pipes and joints etc. complete

and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for

stoneware pipes (166mm Ave. bed thickness) of

following internal diameters with necessary

formwork and curing complete.(B) 150mm dia.

58 2040.00 Providing and fixing M.S. grills of required pattern 121.18 Rupees One Hundred Kg.

to wall frame of windows etc. with 16mm M.S. Paise Eighteen Only

polished square bar at required spacing and frame

of 5 cm x 3 mm flat alround with necessary hold

fast including applying priming coat and two coats

of oil painting etc. complete as directed by

engineer in charge.

59 22.50 Providing and Fixing 0.6 mm thick Colour coated 1,993.39 Rupees One Sqm

steel sheet of TATA & equivalent brand fixed with Hundred Ninety Three

screw and rubber silicon sealer and aluminum strip And Paise Thirty Nine

of size 50 x 3 mm etc complete as directed by

Engineer in charge.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 9 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

60 6.80 Steel work, welded in built up sections framed 9,108.48 Rupees Nine Qtl.

work including cutting, hoisting, fixing in position Hundred Eight And

and applying a priming coat of read lead paint.(A) Paise Forty Eight Only

In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

61 25.00 Providing and fixing in position 300 mm high, 150 1,818.00 Rupees One No.

mm wide English letters made from 1.0 cm thick Hundred Eighteen

stainless steel sheet as directed by Engineer-in- Only

charge with all necessary tools & plants etc.

62 943.00 Earthwork for embankment including breaking 200.75 Rupees Two Hundred Cum

And Paise Seventy

clods, dressing with all lead and lift (including Five Only

watering and consolidation) (E) From Borrow area

within 3.0 Km. lead

63 0.07 Clearing and grubbing road land including 34,889.43 Rupees Thirty Four Hect.

uprooting rank vegetation grass Hundred Eighty Nine

bushes,shrubs,sapling and trees girth up to 300 And Paise Forty Three

mm removal of stumps of trees cut earlier and

disposal of unserviceable materials(D) By

mechanical means in area of thorny jungle

64 100.00 Plantation of trees in soil incl digging 45 x 45 x 202.00 Rupees Two Hundred No.

45cm size pits, preparing soil, providing and

mixing organic fertiliser , watering, planting and

filling the pits as per direction including etc

65 100.00 Providing Tree Plants having minimum 1.00 mt 505.00 Rupees Five Hundred No.

height and healthy growth of various kinds as like

Peltoform, Gulmahore, Karanj, Ambla ,Rain tree,

Saptparni, Cherry, Cryjeliya, Spethodiya, Paras

Pipala, Garmalo, Neem, Borsalli, Kadam, Buch,

Chanpo, Asopalav and as suggested etc

66 1.00 Providing & erecting open well type horizontal 9,613.18 Rupees Nine No.

mono block pump set with stainless steel body Hundred Thirteen And

having following specification (C) 1 H.P. single Paise Eighteen Only

phase open well motor pump set suitable for

LPM discharge @ 25 mtr. head, suitable for

mm dia. Delivery pipe with control panel. &&

mtr long 3 x 1.5 mm2 Submerssible flat copper

67 81.00 Box cutting the road surface to proper slope and 114.44 Rupees One Hundred Cum

Fourteen And Paise

camber for making a base for road work including Forty Four Only

removing the excavated stuff and depositing on

the road side slope as directed upto 50Mt.lead.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 10 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

68 27.00 Providing and laying compacted W.B.M. 150 mm 1,646.30 Rupees One Cum

thick of machine crushed B.T. metal of size 45 mm Hundred Forty Six

to 63 mm with using 0.12/ cmt./10 Smt stone And Paise Thirty Only

screenings as filler and binding material 0.06 cum./

10 Smt. including spreading, watering &

consolidation by vibratory roller etc complete.

69 44.00 Providing and laying cement concrete 1:3:6 (1- 3,909.60 Rupees Three Cum

Cement : 3- coarse sand : 6- hand broken stone Hundred Nine And

aggregates 40 mmnominal size) and curing Paise Sixty Only

complete excluding cost of formwork

70 68.00 Providing and casting in Ordinary Cement 6,014.18 Rupees Six Thousand Cum

Fourteen And Paise

Concrete M.200 for C.C. Road including Eighteen Only

compaction and finishing by trimix process,

including providing construction, contraction and

expansion joint and filling in joints with bitumen,

Hardner etc. complete as directed by engineer in

71 1.00 Office Name / Village name / Bump Ahead sign 5,045.36 Rupees Five No.

Thousand Forty Five

:Providing & Fixing sign bords made out of 2mm And Paise Thirty Six

aluminium sheet, size 90 x60cms. rectangle as per Only

the design of IRC- 67 -1977 Per treated with

phospheting process & acid etching, coated with

one coat of epoxy paint; reflectorised with retro

reflective sheeting as per latest M.O.S.T.

Specifications : Letters and mumerals should be

as per IRC - 30 - 1968, 3.1 m long (2 nos.) Stand

post and frame fabricated from suitable size iron

angle of 50 x 50 x 5 mm. painted with best quality

epoxy coatings in black and white bends. The

details of symbol or incription / numerals for each

boards shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 cms. for each leg.

including excavation curing etc. complete under

the supervision of engineer in charge.(A) Engineer

72 4.00 Providing & Constructing Junction Chamber of size 1,079.69 Rupees One No.

Thousand Seventy

0.35 x 0.35 x 0.60 mt. as directed with Excavation, Nine And Paise Sixty

C.C. 1:2:4, Half Brick Masonry, 15mm Plaster, wti Nine Only

50mm th. C.C. Flooring etc. for connection

rainwater pipes as per detailed as directed by

Engineer in charge including cost of labour and

73 1.00 Providing & Constructing Filter Chamber of size 14,573.20 Rupees Fourteen No.

2.06 x 1.21 x 1.20 mt. as directed with Excavation Hundred Seventy

up to 1.5mt depth, C.C. 1:2:4 for Foundation, Brick Three And Paise

& Half Brick Masonry, 15mm Plaster, Slab in 1:2:4,

Aggregate material, Manhole cover etc. for

connection rainwater pipes as per detailed as

directed by Engineer in charge including cost of

labour and material.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 11 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

74 1.00 Providing water harvesting pit of 2.00 mt x 2.00mt 41,164.22 Rupees Forty One No.

x 4.00 mt. size for water logging with excavation in Hundred Sixty Four

any strata upto four meter depth, filling the pit with And Paise Twenty

B.T.Metal 40 mm in 0.60 mt. depth with 25-40mm

kapachi, 0.30 mt. depth and 2.0 mt. depth with

coarse sand in layers including making P.V.C. line

for water inlet etc. as directed with 250mm dia

bore 35 mt. depth and 160mm dia P.V.C. pipe of

10 Kg. f/Cm2 casing perforated pipe as per

required with gravel packing or as directed.

75 149.00 Providing and laying ordinary cement concrete 4,426.28 Rupees Four Cum

M.200 and curing complete excluding the cost of Hundred Twenty Six

formwork and reinforcement for reinforced And Paise Twenty

concrete work in (B) Walls, from top of foundation

level upto floor two level

76 80.00 Providing and fixing 1.20 Metre high fencing with 391.93 Rupees Three Rmt.

Hundred Ninety One

2.0 Metre long M.S. Angle posts 40mm x 40 mm And Paise Ninety

x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. Three Only

with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg.

per 100 Metre, strained and fixed to posts with

G.I,staples including fixing the postsin ground with

0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

77 454.00 Providing 20mm thick cement plaster in single coat 241.48 Rupees Two Hundred Sqm

Forty One And Paise

on single or half brick walls for interior plastering Forty Eight Only

upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

78 7.50 Supplying and fixing reinforced concrete heavy 1,968.38 Rupees One Rmt.

duty non-pressure pipes with collars for culverts Hundred Sixty Eight

carrying heavy traffic as per IS 458-1991 And Paise Thirty Eight

specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(iii) 600mm dia.

79 1.00 Providing & Supplying Wooden Executive Table 21,881.65 Rupees Twenty One No.

having Size of 1800 (L) X 1000 (W) X 760 (H) mm Hundred Eighty One

with necessary wooden with 8mm glass on And Paise Sixty Five

laminated top supports and framing of 18 mm thick

century make BWP plywood or equivalent and

mm thickness Laminate/Veneer with cost of all

material & Labours with inside one primer coat

Colour, SS Studs and box with Three Drawers &

necessary fixtures and fastenings. The work shall

be done as per drawing or directed by Engineer in

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 12 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

80 3.00 Providing and supplying MS powder coated Visitor 4,242.00 Rupees Four No.

chair with using MS powder coating round pipe Hundred Forty Two

frame support, legs and handle with sear and back Only

portion rubber dunlop with tapesty cover with other

materls etc complete

81 2.00 Providing & Supplying Tendem Visitor's Chair 4,545.00 Rupees Four No.

three Seater made of 1.25 ERW pipe of 16 gauge Hundred Forty Five

with seat & back made from 12 mm hot press ply Only

& Provided with PU molded selected as per image

& work shall be done as per drawing or directed by

as per Engineer in Charge.

82 1.00 Providing & Supplying Armada Mid Back Chair 4,545.00 Rupees Four No.

single position locking Synchro tilt mechanism with Hundred Forty Five

'return-prevention' facility with heavy duty with Only

nylon castors wheels elegant fabric, upholstery for

seat and nylon mesh for back etc. Godrej, Wipro,

Amber. Complete, as directed by the Engineer in

83 3.00 Providing & Supplying CARGO Steel Storwels 10,605.00 Rupees Ten No.

having dimensions - 900 (W) X 507 (D) X 1950 (L) Hundred Five Only

mm made up of 20 gauge M. S. Steel Section, with

04 Nos. adjustable shelves, good quality locking

system, powder coated etc. complete, as directed

by the Engineer in Charge.

84 1.00 Providing & Supplying Books Storage Racks with 11,615.00 Rupees Eleven No.

Glass openable Doors Cub Board having Size- Hundred Fifteen Only

1830mm Height X 900mm Width X 450mmDepth

04 Nos. of full shelves, work shall be done as per

drawing or directed by Engineer in Charge.

85 2.00 Supplying & installing of dry chemical powder type 4,545.00 Rupees Four No.

5 kg capacity fire extingusher as per I.S.. 2171 I.S.I Hundred Forty Five

marke with necessary fitting etc Complete. Only

86 2.00 Supplying & installing of Carbon Dioxide type fire 6,868.00 Rupees Six Thousand No.

Eight Hundred Sixty

extingusher 4.5 kg capacity with I.S.I mark and test Eight Only

Certificate of exploseive dept. of Nagpur

87 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 13 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

12.00 (f) with medium class Rigid PVC pipe and 582.77 Rupees Five Hundred Pts.

Eighty Two And Paise

accessories erected concealed in wall/ceiling Seventy Seven Only

complete Cat-III

88 Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

3.00 (f) with medium class Rigid PVC pipe and 809.01 Rupees Eight Pts.

Hundred Nine And

accessories erected concealed in wall/ceiling Paise One Only

complete Cat-III

89 4.00 Point wiring for on board Looped Plug with 6A 309.06 Rupees Three Pts.

Hundred Nine And

Modular type switch & 5 pin socket erected on Paise Six Only

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories Cat. III

90 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

1.00 (3) Two Pin/RJ-11 Telephone Socket [A] For 160.59 Rupees One Hundred No.

Sixty And Paise Fifty

One GangCat.III Nine Only

10.00 (7) Blank Plate Single Cat.III 25.25 Rupees Twenty Five No.

And Paise Twenty

3.00 (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Hundred No.

Eighty And Paise

Seventy Nine Only

3.00 (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Hundred No.

Ninety Nine And Paise

Ninety Eight Only

91 Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

5.00 (2) 25 mm 21.21 Rupees Twenty One Mtr.

And Paise Twenty

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 14 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

92 1.00 Decorative call bell Ting-tong box type 250 volts 71.71 Rupees Seventy One No.

And Paise Seventy

complete erected One Only

93 110.00 Providing and erecting Mains with 1.1 KV grade 104.03 Rupees One Hundred Mtr.

Four And Paise Three

FRLS PVC insulated ISI marked stranded Copper Only

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

94 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(a)

with medium class Rigid PVC pipe and accessories

60.00 (a) 2 wire 4 sq. mm 140.39 Rupees One Hundred Mtr.

Forty And Paise Thirty

15.00 (b) 2 wire 6 sq. mm 184.83 Rupees One Hundred Mtr.

Eighty Four And Paise

Eighty Three Only

95 4.00 Supplying and erecting Flexible PVC insulated 58.58 Rupees Fifty Eight mtr

And Paise Fifty Eight

multi strand multi core 1.1 kv grade ISI marked Only

copper wires of following size to be erected as

directed..(e) 1.50 Sq.mm 3 core round PVC

96 25.00 Supplying & erecting approved make Telephone 20.20 Rupees Twenty And Mtr.

Paise Twenty Only

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

97 Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

2.00 (ii) 5 to 8 watts Cat-III 112.11 Rupees One Hundred No.

Twelve And Paise

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 15 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

98 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the

(A) Tube Light with integral driver

8.00 (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 373.70 Rupees Three No.

Hundred Seventy

4 feet Cat-III Three And Paise

99 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.

6.00 (ii) 48 - 59 Watts Cat.III 4,248.06 Rupees Four No.

Hundred Forty Eight

And Paise Six Only

100 13.00 providing and erecting Miniature circuit breaker 123.22 Rupees One Hundred No.

Twenty Three And

single pole 6A to 25A suitable to operate on 240 V Paise Twenty Two

A.C. system and having breaking capacity 10 KA Only

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 16 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

101 Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

1.00 (A) 6 to 32 Amp. Cat.III 329.26 Rupees Three No.

Hundred Twenty Nine

And Paise Twenty Six

2.00 (B) 40 Amp. Cat.III 362.59 Rupees Three No.

Hundred Sixty Two

And Paise Fifty Nine

102 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for

1.00 (A) single phase incoming and horizontal single 1,492.78 Rupees One No.

phase outgoing(b) sheet steel double door (IP- Hundred Ninety Two

43)(iv)12 way And Paise Seventy

103 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed

1.00 (ii) 40Amps. DP Cat. III 2,458.34 Rupees Two No.

Hundred Fifty Eight

And Paise Thirty Four

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 17 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

104 1.00 Supplying & erecting earth pit of minimum bore 4,591.46 Rupees Four No.

dia.150mm size approved make Earthing Hundred Ninety One

Electrode consisting Pipe-in-Pipe Technology as And Paise Forty Six

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and

heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retain moisture for long time Necessary

test report must be submitted.(a) For Electrical

Installation up to 440V in normal soilLength of pipe

- 1 MtrBack filling compound - 1 Nos Bag of 15 Kg.

105 1.00 Providing and erecting Annealed bare Copper wire 794.87 Rupees Seven Kg

Hundred Ninety Four

8 to 16 SWG. And Paise Eighty

106 100.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI 112.11 Rupees One Hundred Mtr

Twelve And Paise

armoured cable Aluminium conductor for 1.1 KV. Eleven Only

to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

(B) 2 core 6 Sq. mm

107 Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

5.00 (g) 250mm x 220mm x 135mm [deep] 1,122.11 Rupees One No.

Hundred Twenty Two

And Paise Eleven Only

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 18 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

108 3.00 Providing & erecting Approved make Power 1,948.29 Rupees One No.

Saving 50 Watt Ceiling Fan with double ball Hundred Forty Eight

bearing ISI mark with Condenser 230 volt A.C. 50 And Paise Twenty

Hz 1200 mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod

erected with earthing.(Make shall be approved by

Engineer in charge))

109 3.00 Supplying and erecting 19 / 20 mm. nominal bore 108.07 Rupees One Hundred Mtr.

Eight And Paise

Medium Class M.S. Pipe down rod erected duly Seven Only

painted for fan complete with proper insulation

without leakage and earthing.

110 3.00 Supplying & erecting fan hook box of 10 mm M.S. 108.07 Rupees One Hundred No.

Eight And Paise

round bar bounded to the RCC bars up to 50mm Seven Only

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

111 3.00 Providing 2.5mm.thick laminated acrylic sheet to 18.18 Rupees Eighteen And No.

Paise Eighteen Only

cover the fan hook or Fan box.

112 1.00 Supplying & erecting approved make low noise 1,366.53 Rupees One No.

decorative exhaust fan having square frame ABS Hundred Sixty Six And

body with inbuilt lowers & square frame. 200mm Paise Fifty Three Only

with 1350RPM Cat.II

113 1.00 Providing & erecting open well type horizontal 10,574.70 Rupees Ten No.

mono block pump set with stainless steel body Hundred Seventy Four

having following specification (C) 1 H.P. single And Paise Seventy

phase open well motor pump set suitable for

LPM discharge @ 25 mtr. head, suitable for

mm dia. Delivery pipe with control panel. Cat.II

114 1.00 Supplying and erecting Direct On-line Electronics 1,603.88 Rupees One No.

Starter with 2-5/4-10/8-14/10-16 Amp. Rating relay Hundred Three And

(variable current setting) directly operated in totally Paise Eighty Eight

insulated elegant enclosure and 18 Amp. Rating

power relay with start - stop button for single phase

operation up to 3 HP as per complete erected on

P.W. Block with following features.Low voltage cut

off below 140 VHigh voltage cut off above

VOverload protectionIndicating LEDs for motor on

lv, hv & overload tripping. [Cat.II]

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 19 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

115 1.00 Lowering of submersible motor pump set at the 856.48 Rupees Eight Job

Hundred Fifty Six And

depth of following ,complete with required. Nos. Paise Forty Eight Only

and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after

checking of threads of each pipe with coupling to

take the load of the pump set and pipe assembly

filled up with water

(d)For Open well Horizontal submersible pump

set for sump well (i) 1 HP to 5 HP

116 1.00 Providing and erecting water cooler having storage 54,515.76 Rupees Fifty Four No.

capacity 80Ltr. & cooling capacity 40 Ltr.per hour Hundred Fifteen And

@ an ambient temp of 45˚ C. The outlet temp. of Paise Seventy Six

the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary

inlet & outlet connection. The body of water cooler

will be made from Stainless Steel. ◦

117 1.00 Supplying & erecting 5 stage single reverse 15,620.66 Rupees Fifteen No.

osmosis water purification system with M.S. Hundred Twenty And

powder coated frame, prefilter housing with 'O' ring Paise Sixty Six Only

presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with

psi inline type post carbon filter auto low & high

pressure switches with following size of storage

tank & LPH capacity & erected [B] 25 Ltr / Hr with

30 Ltr. S.S. Pressure Tank

118 3.00 Providing & erecting Switch board for Computer 1,133.22 Rupees One No.

or electric apparatus consisting of following Hundred Thirty Three

modular type accessories mounted with PVC / And Paise Twenty

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate,modules erected with necessary

connections as directed1 no. 6A/16A universal

plug-switch combined.3 nos. 6A Switch3 nos. 6A

5 pin Plug For Modular Type Accessories Cat.III

119 15.00 Providing and erecting ISI marked PVC insulated 104.03 Rupees One Hundred Mtr

Four And Paise Three

PVC Sheathed Flat flexible Submersible copper Only

cable approved make of following Size(b) 3 Core

120 1.00 Plastic enclosure fitted with DIN rail suitable for 52.52 Rupees Fifty Two And No.

Paise Fifty Two Only

incorporating One / Two nos. MCB

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 20 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

121 15.00 Providing and erecting ISI mark Medium class 24.24 Rupees Twenty Four Mtr

And Paise Twenty

RIGID PVC PIPES of following size complete to be Four Only

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (a)20 mm

122 1.00 Providing Water proof straight Joint in PVC 189.88 Rupees One Hundred No.

Eighty Nine And Paise

insulated flat flexible copper cable by using Eighty Eight Only

insulating material, water proofing material, &

making the joint complete.(A) Up to 10Sq. mm

123 5.00 Supplying and erecting B class galvanised iron 343.40 Rupees Three No.

Hundred Forty Three

pipe 32 mm outside dia 45 cm long duly welded on And Paise Forty Only

20 cm x 20 cm x 3 mm thick M.S. base plate,

erected on wall or corner for mounting street light

luminaire with necessary hardware materials duly

124 Providing and erecting FRLS-XLPE(IS:7098)(I)-88

ISI armoured cable Aluminium conductor for

kV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

50.00 (B) 2 core 6 Sq. mm 112.11 Rupees One Hundred Mtr

Twelve And Paise

125 1.00 Supplying & erecting approved make Digital time 3,168.37 Rupees Three Ea

switch having lithium cell 6 years operative and Hundred Sixty Eight

operate battery backup 1 channel day clock with And Paise Thirty

14 memory programme, suitable to operate on

240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

126 Supplying & erecting power contactor ,AC3 duty for

time switch complete erected as per direction Cat

1.00 (A) 2 Pole 250V 12 Amp. 796.89 Rupees Seven Ea

Hundred Ninety Six

And Paise Eighty Nine

127 2.00 Sheets steel powder coated enclosure suitable for 176.75 Rupees One Hundred Ea

Seventy Six And

incorporating One/Two nos. MCB. Paise Seventy Five

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 21 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

128 Supply, Installation, Testing & Commissioning of

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-

efficient of the PV module shall equal or better

than -0.45%/degree C. Solar PV modules of

minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty

and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar

panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration

of AC to DC is 5:6 for the Installation capacity

which are given in AC KW.Solar Inverter: MPPT

Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz,

Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range:

-25~60°C, Integrated protection of Inverter are Anti-

islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground

fault protection, Residual Current Monitoring Unit,

Output Over Current Protection, Output Short

Circuit Protection, Output Over Voltage Protection,

PV array string fault Protection. Protection Degree:

IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 22 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

, Module Mounting Structure: The mounting

(Rectangular pipe / square pipe / circular pipe) with

requisite cross bars, nuts and bolts, etc. shall be

Hot deep galvanized with minimum 80micron

coating. The Rectangular / square /circular hollow

pipe section used for the structure should have a

minimum thickness of 2.0 mm. other than above,

the material thickness should be minimum

mm. A certificate of a structural engineer certifying

the strength and stability of the mounting structure

to withstand the weight and wind speed of

km/hour throughout the life span of 25 years of the

system, shall be submitted by the vendors. Hot

Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar

panel mounting, the structure should be suitable

for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt used

for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most

edge of solar panel shall not be less than 300 mm

to 1200 mm or as per site’s technical/feasibility

requirement.a. Column –The minimum section

b. Rafter - The minimum section (thickness)

should be 60MM*40MMc. Purlin - The minimum

section (thickness) should be 40MM * 40MM

Balane of System with necessary Swichgears

(Suitabel size and protection of ACDB & DCDB),

inter connecting wiring, earthing system as per the

CEIG drawing approval, lightining arrester system

as per the CEIG drawing approval, all liasoning

work with various gov. dipartment like state nodal

agency,DISCOM & CEIG is included in agency

(Excluding All charges namely GEDA Application

fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges and

system stability/strenthning charges.)

5.50 (A) Grid Tied Solar Power System: 1 - 6 kW 46,648.87 Rupees Forty Six PER

(Single phase) Hundred Forty Eight KW

And Paise Eighty

I/We am/are willing to carry out the work at …………% Above / Below percent (Should be written in figures and

words) of the estimated rates mentioned above. Amount of my / our tender works out as under.

Estimated Amount Estimated Amount

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 23 of

It Quantities Item of Work Estimated Rate Unit Total Amount

It Quantities Item of Work Estimated Rate Unit Total Amount

No. estimated According to

but may Rs. In In Words Estimated

be more Figures. Qty.

Put to Tender Rs……………………. Put to Tender Rs…………………….

Add ……..…. % Above Rs……………………. Deduct .………. % Below Rs…………………….

Net Rs……………………. Net Rs…………………….

* (Please strike out whichever is not applicable)

Note 1 :- All work shall be carried out as per public works department Handbook and other specifications of

Division or as directed.

Note 2 :- All the columns is Schedule should be filled in ink and the total of the entries in the last column

should be struck by the contractor under his signature.

Note 3 :- Rates quoted include clearance of site (prior commencement of work and at its close) in all respects

and hold good for work under all conditions, site, moisture, weather etc.

Note 4 :- To be continued on additional sheets, if found necessary.

Dated Signature of the contractor

Deputy Executive Engineer

Road & Building Sub Division

F:\Tender 2026-27\NIVIDA-22\DTP ICDP Kalyana\DTP ICDP K Sch.B Page 24 of