Various Renovation and Repairs works at Government Polytechnic College, Dahod Dist. Dahod (Rising Compound wall, Alluminium section (Windows), Water tank, Rain water pipe and false ceiling)

Name of Work :- Various Renovation and Repairs works at Government

Polytechnic College, Dahod Dist. Dahod (Rising Compound wall, Alluminium

section (Windows), Water tank, Rain water pipe and false ceiling)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Providing and laying brick work using common burnt clay building 40.02 Cum. 4141.66

conventional type bricks having crushing strength not less than

Kg/sq.cm. in super structure in cement mortar 1:6 (1 cement : 6 fine

sand) including the cost of all materials and labour charges etc.

2 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse 10.01 Cum. 4733.87

sand : 3 stone aggregate of 20mm nominal size) including finishing

smooth with curing complete including the cost of form work but

excluding the cost of reinforcement for R.C.C work in Coping.

3 Providing 20mm thick sand faced cement plaster on walls upto 502.00 Sq.m. 353.98

height 10 metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3 sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

4 Finishing wall with weather proof exterior emulsion paint on wall 502.00 Sq.m. 122.14

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, dust and remains of

loose powdered materials etc. complete.

5 Providing I.S.I. mark T.M.T. bar Fe-500D reinforcement for R.C.C. 900.45 Kg. 77.29

work including bending, binding and placing in position complete upto

floor two level.

6 Providing and fixing 0.60 mt. high fencing with 0.75 mt. long M.S. 290.00 Rmt. 1550.35

angle posts 40mm x 40mm x 6mm and oil painting 3 coats fixed at

2.50 mt. c/c with horizontal stainless steel barbed wire weighting

kg. per 100 mt. and razor tape concertina coil strained and fixed to

posts with G.I. staples including fixing etc. complete.

7 Steel work, welded in built up sections framed work including cutting, 11241.45 Kg. 91.08

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins connected to common rafters and the like.

8 Applying two coats of primer of approved brand and manufacture on 502.00 Sq.m. 35.35

new wall interior / exterior surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

9 Providing and fixing window having extruded aluminum colour 116.00 Sq.m. 1713.70

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm (@

Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (@ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (@ wt.of 0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (@ wt. of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (@ wt.

of 0.456 Kg/mt. & @ Wt. 0.457 Kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

10 Providing and fixing PVC laminate Gypsum tiles (595 x 595 x 7.5 1161.28 Sq.m. 1111.00

mm) in false ceiling with necessary alluminum and M.S. framing etc.

11 Providing erecting and fixing double coated ISI water tank of required 8000.00 Litre 3.95

capacity each with all necessary fittings and connection etc. complete

12 Providing and fixing to wall, ceiling and floor 10.0 Kg.F/Cm2 working 168.00 Rmt. 339.05

pressure polythene pipes of the following outside dia. low density,

complete with special flange compression type fittings, wall clamps etc.

including making good the wall, ceiling and floor. (G) 110mm dia.

i.e. Rs. Thirty Five Lakhs, Ninety Thousand Four Hundred Ninety Three and Fourty Four Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

6. Credit for dismantalled materials of amount of Rs. 10000.00 must be recovered from 1st R.A. bill of

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dahod (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Dahod Dahod Dahod