Procurement of Mechanical Spares for upcoming U-5 ESP O/H Job (Dec,2025) under AHP-E/M Dept., Santaldih T.P.S.

RAPPING SHAFT FOR CERM (1 SET=D S0,$HAFT 4 NOS.+ SLEEVE 3 NOS+SET RING 2 NOS )FOR ESP CERM ADDITIONAL DATA: RAPPING SHAFT FOR CERM. RAPPING SHAFT FOR CERM (1 SET = D50 SHAFT 4 NOS+SLEEVE 3 NOS+ SET RING 2 NOS) FOR ESP CERM,SHAFTS (1,2,3&4), (SHAFT-1:LENGTH - 940 MM, SHAFT-2: LENGTH- 3990 MM, SHAFT-3: LENGTH - 3990 MM, SHAFT-4: LENGTH # 3045 MM)FOR COLLECTING RAPPING, DIA 50 MM. Shaft & Set Ring MOC:EN 8D,Sleeve MOC:SA 106 & Key MOC:IS 2062.

RAPPING SHAFT FOR EERM FOR ESP (1 SET=D 50 SHAFT 3 NOS.+ SLEEVE 2 NOS.+SET RING 2 NOS.+KEY 1 NO.) ADDITIONAL DATA: RAPPING SHAFT FOR EERM HORIZONTAL. RAPPING SHAFT FOR EERM FOR ESP (1 SET = D50 SHAFT 3NOS+SLEEVE 2NOS+SET RING 2 NOS+KEY 1NO), EERM HORIZONTAL SHAFT, SHAFTS (1,2&3),(SHAFT-1: LENGTH-3780 MM,SHAFT-2: LENGTH-3595 MM,SHAFT-3:LENGTH-3490MM)FOR EMITTING RAPPING,DIA 50 MM. SHAFT & SET RING MOC: EN 8D,SLEEVE MOC: SA 106 & KEY MOC: IS 2062

SHAFT,EERM,DIA-40MM,EN-8,SET OF 3 FOR ESP EERM 3 NOS= 1SET, LENGTH- 2500MM, 3863MM, 3770MM, DIA-40MM, SLEEVE-02 NOS, SET RING- 2 NOS, KEY-01 NO. COUPLING-01 NO, MOC- EN-8 ADDITIONAL DATA: EERM VERTICAL SHAFT,EERM,DIA-40MM,EN-8,SET OF 3.VERTICAL SHAFT WITH KEY SLOT,FOR EERM, DIA-40MM,1 SET COMPRISES OF THE FOLLOWINGS: SHAFT-03 NOS.SHAFT-1:LENGTH-2502MM,SHAFT-2:LENGTH-4412MM,SHAFT-3:LENGTH-3766MM), SPACER SLEEVE 2 NOS,BUSH BEARING WITH BRACKET-05 NOS,THRUST BEARING-01 NO,THRUST PAD-01 NO.FOR BHEL MAKE 250 MW UNIT ESP MODEL NO.FAA-9X37.5M-116150-2. SHAFT,SHAFT END,THRUST BEARING&PAD MOC:EN 8D,SLEEVE MOC:SA 106,KEY MOC: IS 2062,BUSH BEARING MOC: IS 210 FG 260.

MAJOR PIN WHEEL BIG ADDITIONAL DATA: MAJOR PIN WHEEL BIG. FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2. 24 NOS OF PIN / WHEEL,PIN MATERIAL:EN 36B

MINOR PIN WHEEL SMALL ADDITIONAL DATA: MINOR PIN WHEEL SMALL. FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2. 10 Nos OF PIN/WHEEL),PIN OF PIN WHEEL MATERIAL MOC:EN 36B

PLAIN BEARING WITH NUT & BOLT $FOR ESP BHEL (FOR CERM & EERM D50 SHAFT) FOR BHEL MAKE 250 MW UNIT ESP ADDITIONAL DATA: PLAIN BEARING WITH NUT & BOLT.FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2.ID-52MM,TWO PART, L-160 MM. PLAIN BEARING WITH HT Fasteners,Grade-8.8,Fasteners-M16X100mm ,LENGTH:160mm,HEIGHT:90mm,PLAIN BEARING MOC:IS 210 FG260.

BEARING WITH CI BUSH IN SPLIT FOR EERM VERTICAL SHAFT ADDITIONAL DATA: VERTICAL BUSH BEARING WITH CI BUSH IN SPLIT.FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2. 01 Set CONSISTS OF 01Set OF BRCAKET+01Set OF BUSH BEARING,CI BUSH. BRACKET MOC:IS 2062 & BUSH BEARING MOC:IS 2062)

SLEEVE FOR CERM /EERM OF D50 SHAFT ADDITIONAL DATA: SLEEVE FOR CERM /EERM OF D50 SHAFT.FOR Bhel Make ESP,250MW,Model No.FAA-9X37.5M-116150-2.MOC:SA 106.

SET RING 50 FOR ESP FOR ESP CAT PART NO.79-004:1 BHEL OF UNIT 5,6,CAT PART NO.79-004:13 FOR INTERNALS OF ESP FOR UNIT 5,6,MAKE-BHEL,TYPE/MODEL: FAA-5X36-2X102125-2; CUSTOMER NO.0289 AN D 0290 ADDITIONAL DATA: SET RING,FOR ESP CERM&EERM SHAFT,DIA-50.FOR ESP,BHEL MAKE-250MW UNIT ESP,MODEL NO.FAA-9X37.5,M-116150-2.MOC:EN 8D.

BOTTOM BEARING # OF EM RAPPING VERTICAL SHAFT ADDITIONAL DATA: BOTTOM BEARING FOR EERM VERTICAL SHAFT.FOR Bhel Make ESP,250MW.Model No.FAA-9X37.5M-116150-2. 1Set CONSISTS OF 01No OF PAD+03 Nos OF HT HEX SCREW M12X30,Gr-8.8+3 Nos OF SPRING WASHER GR 8.8.MOC:EN 8D.

THRUST BEARING OF EM VERTICAL RAPPING SHAFT ADDITIONAL DATA: THRUST BEARING OF EM VERTICAL RAPPING SHAFT.FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2. 01Set CONSISTS OF 01 No OF THRUST BEARING+02 Nos OF HT HEX SCREW-M12X30 Gr-8.8+02 Nos OF SPRING WASHER GR 8.8.MOC:EN 8D.

INNER ARM ASSY FOR ESP # ADDITIONAL DATA: INNER ARM ASSY FOR CERM & EERM WITH FASTENERS 01 Set CONSISTS OF 01 Set OF INNER ARM+01 Set OF M16X50MM,Gr-8.8 FASTENERS.INNER ARM MOC:IS 2062.

OUTER ARM FOR CERM # ADDITIONAL DATA: ROLLER MOC:EN 8D,10mm FLAT MOC:IS 2062.

OUTER ARM FOR EMITING RAPPING SYSTEM $FOR ESP FOR ESP BHEL ADDITIONAL DATA: ROLLER MOC:EN 8D,10mm FLAT MOC:IS 2062.

ANVIL PLATE SHOCK PAD FOR SHOCK BAR $FOR ESP BHEL (PAD ALONE)FOR BHEL MAKE 250 MW UNIT ESP ADDITIONAL DATA: ANVIL PLATE SHOCK PAD FOR SHOCK BAR.FOR Bhel Make ESP,250MW. Model No.FAA-9X37.5M-116150-2. ANVIL FOR CE SHOCK BAR.ANVIL PAD– 155mmX80mmX30mm WITH 02 HOLES.MOC:EN 8.

COUPLING FOR CERM FOR 250MW BHEL ESP BHEL ADDITIONAL DATA: COUPLING FOR CERM SHAFT SIDE.

SHOCK BAR ASSY BHEL-RANIPET WITH SHOCK PAD,PLATE ,LOCK BOLT & COLLAR FOR 250 MW BHEL ESPRN ADDITIONAL DATA: M.O.C#MS,Fasteners # HT 8.8 grade.

HARIHARAN POWER ENGINEERING (BID ID -5802197)

ANDISC ENGINEERS PRIVATE LIMITED (BID ID -5789383)

GEECO Enercon Pvt Ltd (BID ID -5797778)

AIR CONTROL ENGINEERING PVT LTD (BID ID -5770428)

M03-E06-00289 HSN: 84219900

M04-E06-00175 HSN: 84219900

M04-E06-00172 HSN: 84219900

M04-E06-00277 HSN: 84219900

M03-E06-00431 HSN: 84219900

M04-E06-00116 HSN: 84219900

M04-E06-00192 HSN: 84219900

M04-E06-00272 HSN: 84219900

M04-E06-00279 HSN: 84219900

M04-E06-00280 HSN: 84219900

M04-E06-00445 HSN: 8404

M04-E06-00469 HSN: 84219900

ANDISC ENGINEERS PRIVATE LIMITED

GEECO Enercon Pvt Ltd

M04-E06-00113 HSN: 84219900

HARIHARAN POWER ENGINEERING