Bhalej Ode Ahima Road Km 0/00 to 14/700 FDR, Asphalt work, CC Road,Structure work, RCC Rain water gutter, Crass Barriar and road furniture work

Clearing and grubbing road length including uprooting plank, vegetation grass bushes, shrubs, saplings, and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of un serviceable materials. (C) By mechanical means in area of light jungle.

Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed with all lead and lift.

Construction of granular Sub base (Grading-I) by providing close graded material BTMC using metal 53 mm to 26.5 mm @ 27.5%, aggregate 26.5 mm to 9.5 mm @ 22.5% & 9.5 mm to 4.75 mm @ 10% and stone dust 4.75 mm & below @ 40% including spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density complete as per MORTH specification.

Providing, laying, spreading and compacting 250 mm thick (2 layer of 125 mm) graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tripper to site, laying in uniform layers with grader in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc. complete as per MORT&H Specification.

Providing & laying Priming coat with emulsion SS-1 grade and spraying emulsion with spray set fitted on mechanical bouzer using emulsion at the rate of 7.5 KG / 10 Sqm on WMM surface including cleaning the surface etc. complete.

Providing and laying 20 mm thick Mix seal surface with B.T. aggregate as per MORT&H gradation and specification with asphalt of Grade VG-30 at the rate of 5.09% i.e. 50.9 KG / M.T. by weight of total mix of asphalt for tack coat at 2.5 KG / 10 Sqm including heating & mixing in continuous batch mix plant, transporting the mix spreading the same by sensor paver finisher and consolidation by vibratory roller as per MORT&H specification including cost of all materials fuel, labours, tools and plant etc. using contractor's own machineries, batch mix plant and sensor paver finisher etc. complete.

Providing and laying Glass fibre Geogrid with Non-Woven Geotextile having tensile strength of 50 kN/m, tack coat with bitumen grade VG-30 and spraying with spray set filled on mechanical sprayer using bitumen at the rate of 5.0 kg / 10 Sqm on surface, including cleaning the surface etc. complete as per instruction of Engineer in charge.

Providing and laying 50 mm thick compacted D.B.M. with B.T. stone aggregates as per MORT&H gradation & specification with bitumen VG-30 for mixing at the rate of 45.00 KG / M.T. by weight of total mix i.e. (4.5% by weight of total mix) & for tack coat at 2.5 KG / 10 Sqm including heating the asphalt & aggregates by continuous batch mix plant & spreading the same by sensor paver finisher including rolling & consolidation with 10-12 tones vibratory and power roller & providing all materials, equipments, tools & plants, fire wood, oil, kerosene, labour charges etc. and using contractor's own machineries, batch mix plant and sensor paver finisher etc. complete.

Providing and laying 30 mm thick Bituminous Concrete using B.T. aggregate as per MORT&H specification & Bitumen grade VG-30 for mixing at 55.00 KG / M.T. i.e. 5.5% by weight of total mix & for tack coat at 2.5 KG / 10 Sqm including heating the aggregate and asphalt by continuous batch mix plant and spreading the same by sensor paver finisher and consolidation with Pneumatic Roller and power roller including providing all materials equipment, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor's own machineries, batch mix plant and sensor paver finisher etc. complete.