Tender for providing New 250 KVA 11/0.4 KV S/Stn along with HT and LT Line at Majari in Electrical Section Dabat under Electrical Sub- Division HPSEBL Kot Bilaspur.

Material Part of 250 KVA S/Stn (TS No. 117/2025-26)

Prov. Muff with concerete filling

Prov. X-arm [ Chhanel iron (100x50x5mm), Length:2800 mm X 2 Nos]

Prov. M S Angle Iron.(50x50x6mm) Length 2800 mmx(1 No) For LA

Prov. X-arm [ Chhanel iron (75x40x4.8mm), Length:2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

Prov. X-arm [ Chhanel iron (100x50x5mm), Length:2800 mm X 2 Nos]

Prov. X-arm [ Chhanel iron (100x50x6mm), Length:460 mm X 2 Nos for supporting Main Channel of Transformer]

Prov. M S Angle Iron (50x50x6mm) Length 2800 mm x 2 Nos

Prov. M S Angle Iron (35x35x6mm)Length 460mm x 2 Nos

Prov. M S Angle Iron (50x50x6mm) Length 950 mm x 2 Nos

Prov. M S Angle Iron (50x50x6mm) Length 2800 mm x 2 Nos

Prov. M S Angle Iron (50x50x6mm) Length 450 mm x 1Nos

Prov. GO switch handle supporing M S Channel Iron (75x40x4.8mm) Length 460 mm x 1Nos

Prov. GO AB Switch Unit (11 KV. 400A. 25 KA )

Prov. D.O fuse Unit.

Prov Dead End Clamps, straight stepples, Bend stapples and eye socket, ball cleave etc.

Prov. Stay set comp.

Prov. Stay wire(7/3.15mm)(7.0 Kg per stay set).

Prov. Pipe Earthing set .

Prov. Half clamp (M.S. Flat 50x6mm)

Prov. Full clamp (M.S. Flat 50x6mm)

Prov. M.S. Nuts & Bolts of various sizes (Galvanised/Coated) [Preferably 16 mm phase or more (with flat and spring washers)]

Prov. copper Thimble

Prov. Danger plate

Prov. Barbed Wire

Prov. Aluminium Paint

Prov. Red oxide

Prov. LT Switched Capacitors 81-KVAR for 250 KVA (Rate per KVAR)

Prov. Chain Link Fencing, Angle Iron, Gate etc. for transformer fencing

Prov. Transformer Bed (Civil work)

Material Part of HT (TS No. 118/2025-26)

Prov Dead End Clamps, straight stepples, Bend stapples and eye socket, ball cleave etc.

Prov. 11 KV pin insulator with pin

Prov.Stay set complete in all respect (i/c Stay Clamp)

Prov. Stay wire(7/3.15mm)(10 Kg per stay set).

Prov. Half Clamps

Prov.Full Clamps

Material Part of LT (TS No. 119/2025-26)

Prov. RCC Muff with concerete filling

MS chanel iron (75x75x6mm) length 1500

Shackle insulator

D-iron

Prov. L.T. Stay set Complete

Prov. Stay wire (7/3.15mm)(6.0Kg per stay)

Half clamp

Full clamp

Prov. Nut & Bolts of various sizes (Galvanised / Coated ) [Preferable 16 mm Ø or more (With flat and spring washers )]

Prov. Red oxide

Prov. Aluminium Paint

LT Earthing set (preferbly coil earthing)

Erection Part of 250 Kva S/Stn (TS No. 117/2025-26)

Erection of 250 KVA 11/0.4 KV Transformer, erection of T Pole, Painting of Pole, erection of stay, transformer earthing, LT Penal Box, Energy meter, LT Cable including loading and unloading Transformer complete in all respect

Manual carriage for above material (Av. Lead 0.050 Km.)

Erection Part of HT (TS No. 118/2025-26)

Erection of HT stay set, stay wire, stay clamp, egg insulator, digging of pit, filling and ramming, fixing of stay rod, nozzeling and tightening etc. complete in all respect.

Erection AAAC 7/3.15 (50mm2) i/c laying, stringing, sagging, binding with insulators and jumpering etc. complete in all respect.

Erection Part of LT (TS No. 118/2025-26)

Erection of LT steel poles 8/9 Mtrs long, shackle insulator with D-iron eye hook, digging of pole pit size 1.20x0.80x1.35 filling and ramming and painting etc complete in all respect

Erection of LT stay set, stay clamp, egg insulator, stay wire, stay thimble, nozzeling and tightening, digging of stay pit size 1.20*.80*.1.50 mtr, filling and ramming of pit complete in all respect

Erection of LT earthing (pipe earthing) set complete in all respect, digging of earth pit, filling of pit with required material and ramming complete in all respect.

Erection AAAC 6/1/3.35 (50mm2) i/c laying, stringing, sagging, binding with insulators and jumpering etc. complete in all respect. (Single Conductor P/kM)

Manual carriage for above material (Av. Lead 0.100 Km.)

Please Enable Macros to View BoQ information