Maintanance of RRT Office at Bovikkanam in Kasaragod range

Amount

Taking out doors, windows and celestory window shutters (steel or wood ) including stacking within 50 metres lead of area 3 sq. metres and below

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors and windows clerestory windows 30mm thick shutters including ISI marked MS butt hinges bright finished if required size with necessary screw excluding panelling which will be paid for separately all complete as per direction of engineer in charge using anjili/ jackwood

Supplying and fixing PVC doors for bathroom as per the direction of engineering charge

Providing and fixing MS grills of required pattern in frames of windows etc with MS flats, squares or round bars etc including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plug screws etc

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Steel work in built up tubular(round, square or rectangular hollow tubes etc) trusses etc , including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. Hot finished welded type tubes

Providing Al-Zn coated 0.45mm thick GI trafford sheet (jsw/ jindal product) roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead, on overlapping of sheets complete ( upto any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Demolishing cement concrete manually/ by mechanically means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix

Centering and shuttering including strutting etc and removal of form for shelves (cast in situ)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level 1:1.5:3

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and medium tensile steel bars

White washing with lime to give an even shade. Old work ( one or more coats)

Finishing walls with acrylic smooth exterior paint of required shade. Old work (2 or more coat applied @1.67 ltr/10sqm) on existing cement paint surface

Finishing walls with acrylic smooth exterior paint of required shade. Old work (2 or more coat applied @1.67 ltr/10sqm) on existing cement paint surface

Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in widtrh or 10sqm on plan), including dressing of sides and ramming of bottomd, lift upto 1.5m, including getting out of the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil

Laterate masonry with neatly dressed laterate stone of size 30x20x20 cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc complete

Laterate masonry with neatly dressed laterate stone of size 30x20x20 cm or nearest size in cement mortar 1:6 for superstructure above floor two level including all cost of materials, labour charges etc complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Providing and laying in position specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8

Providing GI mesh of 8 gauge having inch spacing between bars, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding etc

Providing and fixing 1mm (20 gauge) thick MS sheet on existing frame of door/ window shutter

Steel work in built up tubular(round, square or rectangular hollow tubes etc) trusses etc , including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. Hot finished welded type tubes

Providing Al-Zn coated 0.45mm thick GI trafford sheet (jsw/ jindal product) roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead, on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

12mm cement plaster of mix 1:6

white washing with lime to give an even shade. Old work ( one or more coats)

Finishing walls with acrylic smooth exterior paint of required shade. Old work (2 or more coat applied @1.67 ltr/10sqm) on existing cement paint surface

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4, including grouting the joints with white cement and matching pigments etc complete. Size of tile 600 x 600mm

Providing and laying ceramic glazed floor tiles of size 300 x 300mm of 1st quality of approved make in colours such as white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 including pointing the joints with white cement and matching pigments etc complete

Providing and fixing 1st quality ceramic glazed wall tiles of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge , in skirting, risers or steps and dados, over 12mm thick bed of cement mortar 1:3 and joining with cement mixed with pigment of 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing stainless steel A ISI 304 kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm , including painting of fittings and brackets , cutting and making good the walls wherever required. Kitchen sink without drain board 610 x 510mm bowl depth 200mm

Providing and fixing PTMT pillar cock of approved quality and colour, 15mm nominal bore, 125mm long foam flow, weighing not less than 120 gms

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipr 40mm dia

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1m spacing. This includes jointing of pipes & fittings with one step[ PVC solvent cement and testing of joints complete as per direction of Engineer in charge 50mm dia 10Kfg/cm. Internal work, exposed on wall