Rate Contract for Supply, Installation and Commissioning of ICT Equipments (Tier 4) (Video Conferencing, Display Unit, Mobility Devices etc)

ANNEXURE 2 - TECHNICAL BID COMPLIANCE

EQUIPMENT TYPE INTERACTIVE FLAT PLANEL DISPLAY (IFPD) WITH OPS

Item Code Item Name

24PI57 86” Interactive Flat Panel Display (IFPD) with OPS

Parameter Technical Specification Compliance (Yes/No)

Display Size 86 inches diagonal or better

Panel Type VA (Vertical Alignment) or better

Backlight Unit Direct LED (DLED) or better

Resolution 3840 x 2160 pixels (4K Ultra HD) or better

Aspect Ratio 16:9 or better

Brightness 400 cd/m² typical, 450 cd/m² maximum or better

Contrast Ratio 1200:1 or better

Response Time 6.5 ms or faster

Viewing Angle 178° horizontal and vertical or better

Display Colors 1.07 billion colors (10-bit) or better

NTSC Gamut 72% or higher

Touch Technology Infrared recognition or better

Touch Points Supports up to 40 touch points and 20 writing points or more

Touch Accuracy ±1.5 mm or more precise

Touch Response Time ≤8 ms or faster

Writing Height ≤2 mm or better

Minimum Object Size 3 mm or smaller

Supported Operating Systems Windows 10/8/7, Linux, Mac OS X, Chrome OS, Android or equivalent

Built-in Operating System Android 14.0 or newer

Processor ARM Cortex-A73 quad-core or better

GPU Mali G52 MC1 or better

RAM 8 GB or more

Storage 128 GB or more

Audio Output 2 x 16W front-facing speakers or more

Input Ports HDMI IN (3), VGA IN (1), DP IN (1), USB 2.0 (2), USB 3.0 (3), Type-C (1), Audio IN, RS232, RJ45 IN or equivalent

Output Ports HDMI OUT (1), Audio OUT, SPDIF, RJ45 OUT or equivalent

Expansion Slots TF Card slot for up to 256 GB additional storage or better

Power Supply 100-240V~50/60Hz, 4.0A or better

VESA Mount 800 x 400 mm or equivalent

OPS OPS with I5, 16GB RAM, 512GB SSD and Windiws 11 OS.

Accessories power cord, HDMI cable, USB touch cable (Type A-B), remote control, wall mount bracket, stylus pen.

Environmental Conditions Operating temp: 0°C-40°C, humidity: 10%-90%, storage temp: -20°C-60°C or better

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI58 PTZ Camera

Parameter Technical Specification Compliance (Yes/No)

Sensor 1/2.8" 2MP CMOS

Video Output (HD) Interface HDMI / Ethernet / USB

Optical Zoom Min 12x or better

Viewing Angle Min 72.5° (H) / 44.1° (V) / 80.5° (D)

Aperture Min F1.6 ~ F2.8

Focal Length 3.9mm ~ 46.8mm

Shutter Speed 1/1 ~ 1/10,000 sec

Minimum Object Distance Min 1000/1500mm (Wide / Tele)

Video S/N Ratio > 50dB

Minimum Illumination 1.0 lux (F1.6, 50IRE, 30fps)

Focus System Auto / Manual / Smart AF

IP Protocol RTSP / RTMP / RTMPS / MPEG-TS / SRT

PoE PoE+ (IEEE802.3af)

Panning Angle +170° ~ -170°

Panning Speed 120° / sec

Tilting Angle +90° ~ -30°

Tilting Speed 80° / sec

Preset Positions Min 10

Audio Line In / MIC In

Camera Control Interface USB 3.0

Camera Control Protocol VISCA / VISCAIP / ONVIF

Certifications BIS, CE, FCC & RoHS Certified.

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI59 Speakerphone for PTZ Camera

Parameter Technical Specification Compliance (Yes/No)

Interfaces USB 2.0 Full Speed (Mini-B), Bluetooth, NFC (Near Field Communication), EXT IN/OUT (stereo mini plug)

Connectable Devices USB: Computer running Windows or macOS Bluetooth: Smartphone running Android or iOS

Power Sources USB bus power or external power

Supported OS Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 7 (32bit/64bit), macOS 10.14, macOS 10.13, macOS 10.12 USB: USB 2.0 or late

Microphone Unidirectional microphones x 2, 360° coverage

Speaker Full-range speaker x 1

Volume Momentary maximum: 90 dB (0.5 m)

Frequency Bandwidth For sound pickup: 100 Hz to 20,000 Hz For playback: 190 Hz to 20,000 Hz

Signal Processing Adaptive echo canceller, Noise reduction, Automatic tracking, Automatic gain control, Dereverberation, SoundCap

Mode Standard Mode: Pick-up the sound in Small-Medium conference rooms SoundCap Mode: Automatically mute distracting noise in open workspace and deliver only the sound from the pick-up range (radius of 1 m)

Daisy Chain/Extension should support daisy chain of 3speakerphones or 3 Microphones

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI60 L3 Core Switch -- 48*25G and 8-port 40/100 G uplink

Parameter Technical Specification Compliance (Yes/No)

General Requirements L3 Managed Switch should have minimum 48x 25G/10G/1G SFP28/SFP+/SFP slots, 2x1/10Gig SFP+ slots and 8x 40G/100G QSFP+/QSFP28 slots. slots.

The proposed switch form factor should be Rack-Mount Appliance and should have minimum one RJ-45 Serial console or any other type of console port and 1 RJ -45 management or service port.

Switching capacity of the proposed switch should be minimum 4000 Gbps and min 4000 Mpps Packet per second.

Proposed switch should support Active-Active using McLAG, VSS, or virtual stack or any other equivalent functionality.

Propsoed switch should have hot swappable redundant power supply from day 1

Proposed switch should support min 8K Multicast route entries from day 1

Proposed Switch should support network latency of not more than 1 µs

Proposed Switch should support minimum 64K MAC address and 4000 VLAN's ID

Layer 3 Requirements Proposed switch should support routing protocol -static route, RIP, OSPF, BGP from day 1

Proposed switch should support VXLAN, VRF, Bidirectional Forwarding Detection (BFD), ECMP, Multicast protocol (PIM) from day 1

Proposed switch should support IP Conflict Detection and Notification from day 1

Layer 2 & Authentication Requirements Should support 802.1p support, QoS support prioritizing the traffic

Should support 802.1x port-based authentication

Should support 802.1x MAC-based authentication, IEEE 802.1x MAC Access Bypass (MAB).

Should support IEEE 802.1x Guest and Fallback VLAN

Should support IEEE 802.1x Dynamic VLAN Assignment

Should support TFTP, SNTP, DHCP clinet and server

Switch should integrate with RADIUS, Radius CoA,TACACS+ servers

Should support Multiple Spanning Tree Protocol MSTP, RSTP, STP

Management Should support SSH, HTTP,HTTPS

Switch should support SNMP v1, v2c and v3, sflow v5 or netflow.

Proposed switch should be managed via both, GUI and CLI

Security Should support TLS v1.3 from day 1

Solution should support in-built network access control feature to bounce all the devices by default in onboarding VLAN and based on the devices matching with the specified criteria devices should be assigned to a specific VLAN.Criteria: a.MAC address, b. hardware vendor, c. device family, d. device type, e. device operating system and user group.

Solution should have option to allow administrators to quarantine hosts and users connected to a appliance via GUI. Quarantined MAC addresses should be isolated from the rest of the network and LAN.

Certification/Credentials FCC, CE/EU, UL, RoHS2

The proposed Switch OEM should be ISO 9001, ISO 14001 and ISO 27001 certified. Bidders need to provide Publicly available Website Link/document along with the technical bid.

The proposed product or product family or operating system should be EAL or higher or NDPP certified.

Proposed Switch OEM should be present in Leader magic quadrant of Enterprise Wired and Wireless LAN Infrastructure report in latest Gartner Report of year 2025. Bidders need to provide Publicly available Website Link/document along with the technical bid

Integration All the switches & Wireless Solution should be from same OEM and should support integration with existing firewall for easy management and integration. Management of proposed switches and Wireless solution should be from single pane of glass and management tool

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI61 Layer 2 Switch

Parameter Technical Specification Compliance (Yes/No)

General Requirements Access switch should have minimum 48x 1G RJ45 ports and 4x 10G/1GSFP+/SFP slots

The proposed switch form factor should be Rack-Mount Appliance and should have one RJ-45 Serial console or any other type of console port.

Switching capacity of the proposed switch should be minimum 176 Gbps and min 260 Mpps Packet per second.

Proposed Switch should support network latency of not more than 1 µs

Proposed Switch should support minimum 32K MAC address and 4000 VLAN's ID

Layer 2 & Authentication Requirements Should support 802.1p support, QoS support prioritizing the traffic

Should support 802.1x port-based authentication

Should support 802.1x MAC-based authentication, IEEE 802.1x MAC Access Bypass (MAB).

Should support IEEE 802.1x Guest and Fallback VLAN

Should support IEEE 802.1x Dynamic VLAN Assignment

Should support TFTP, SNTP

Switch should integrate with RADIUS, Radius CoA,TACACS+ servers

Should support Multiple Spanning Tree Protocol MSTP, RSTP, STP

Management Should support SSH, HTTP,HTTPS

Switch should support SNMP v1, v2c and v3, sflow v5 or netflow.

Proposed switch should be managed via both, GUI and CLI.

Security Proposed Switch should support TLS v1.3 from day 1

Switch should support in-built network access control feature to bounce all the devices by default in onboarding VLAN and based on the devices matching with the specified criteria devices should be assigned to a specific VLAN.Criteria: a.MAC address, b. hardware vendor, c. device family, d. device type, e. device operating system and user group. In case, above mentioned functionality is not in-built in the switch bidder can provide additional required hardware and software resources of same OEM whose switches are proposed to meet the mentioned functionality.

Switch should have option to allow administrators to quarantine hosts and users connected to a Switch via GUI. Quarantined MAC addresses should be isolated from the rest of the network and LAN. In case, above mentioned functionality is not in-built in the switch above can provide additional required hardware and software resources of same OEM whose switches are proposed to meet the mentioned functionality.

Certification/Credentials FCC, CE/EU, UL, RoHS2

The proposed Switch OEM should be ISO 9001, ISO 14001 and ISO 27001 certified. Bidders need to provide Publicly available Website Link/document along with the technical bid.

The proposed product or product family or operating system should be EAL or higher or NDPP certified.

Proposed Switch OEM should be present in Leader magic quadrant of Enterprise Wired and Wireless LAN Infrastructure report in latest Gartner Report of year 2025. Bidders need to provide Publicly available Website Link/document along with the technical bid

Integration All the switches & Wireless Solution should be from same OEM and should support integration with existing firewall for easy management and integration. Management of proposed switches and Wireless solution should be from single pane of glass and management tool

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI62 Layer 2 PoE Switch

Parameter Technical Specification Compliance (Yes/No)

General Requirements PoE Access switch should have minimum 24x 2.5G/1G/100M RJ45 ports and 4x 10G/1GSFP+/SFP slots.

The proposed switch should have minimum one RJ-45 Serial console or any other type of console port and 1 RJ -45 management or service port

Proposed Switch should support minimum 780W PoE budget and support 802.3 af, 802.3at, 802.3bt

Switching capacity of the proposed switch should be minimum 200 Gbps and min 320 Mpps Packet per second.

Proposed Switch should support network latency of not more than 1 µs

Proposed Switch should support minimum 32K MAC address and 4000 VLAN's ID

Layer 2 & Authentication Requirements Should support 802.1p support, QoS support prioritizing the traffic

Should support 802.1x port-based authentication

Should support 802.1x MAC-based authentication, IEEE 802.1x MAC Access Bypass (MAB).

Should support IEEE 802.1x Guest and Fallback VLAN

Should support IEEE 802.1x Dynamic VLAN Assignment

Should support TFTP, SNTP

Switch should integrate with RADIUS, Radius CoA,TACACS+ servers

Should support Multiple Spanning Tree Protocol MSTP, RSTP & STP

Management Should support SSH, HTTP,HTTPS

Switch should support SNMP v1, v2c and v3, sflow v5 or netflow.

Proposed switch should be managed via both, GUI and CLI.

Security Proposed Switch should support TLS v1.3 from day 1

Switch should support in-built network access control feature to bounce all the devices by default in onboarding VLAN and based on the devices matching with the specified criteria devices should be assigned to a specific VLAN.Criteria: a.MAC address, b. hardware vendor, c. device family, d. device type, e. device operating system and user group. In case, above mentioned functionality is not in-built in the switch bidder can provide additional required hardware and software resources of same OEM whose switches are proposed to meet the mentioned functionality.

Switch should have option to allow administrators to quarantine hosts and users connected to a Switch via GUI. Quarantined MAC addresses should be isolated from the rest of the network and LAN. In case, above mentioned functionality is not in-built in the switch above can provide additional required hardware and software resources of same OEM whose switches are proposed to meet the mentioned functionality.

Certification/Credentials FCC, CE/EU, UL, RoHS2

The proposed Switch OEM should be ISO 9001, ISO 14001 and ISO 27001 certified. Bidders need to provide Publicly available Website Link/document along with the technical bid.

The proposed product or product family or operating system should be EAL or higher or NDPP certified.

Proposed Switch OEM should be present in Leader magic quadrant of Enterprise Wired and Wireless LAN Infrastructure report in latest Gartner Report of year 2025. Bidders need to provide Publicly available Website Link/document along with the technical bid

Integration All the switches & Wireless Solution should be from same OEM and should support integration with existing firewall for easy management and integration. Management of proposed switches and Wireless solution should be from single pane of glass and management tool

Warranty 3 years comprehensive warranty

Item Code Item Name

24PI63 Access Point

Parameter Technical Specification Compliance (Yes/No)

General Requirements The Access Point should support 802.11ax wifi-6 or higher standard

Must have the Tri-radio option to support radio1 as 2.4 GHz and radio 2 as 5 GHz devices and radio 3 for frequency scanning and should support BLE/ZigBee.

Should have min 4 antenna with min 4 dBi for 2.4Ghz and min 4 dBi for 5GHz and min 3dBi for BLE antenna

Should have minimum 3x100M/1000M Base-T RJ45 1x RS-232 RJ45 Serial Port

AP should support 802.3at or higher PoE mode.

Should support min 2x2 MU-MIMO with 2 streams

The access Point should support aggregate throughput of min 1.7 Gbps.

Access point should support SSID's in Tunnel, Bridge and mesh mode.

Should support min 8 SSIDs per client serving radio

Should support following EAP types : EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

Access point should support IEEE standards 802.11a, 802.11b, 802.11be, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1X, 802.3af, 802.3at

Should support User/Device Authentication: WPA, WPA2, and WPA3 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist

Should have physical security lock (such as Kensington lock)

Access point should be RoHS complied

Should support mounting options of Ceiling, T-Rail and wall all these accessories should included with box.

Access point should support below Wireless Monitoring Capabilities

a) Rogue Scan Radio Modes should support both background and dedicated

b) WIPS / WIDS Radio Modes should support both background and dedicated

c) should support Spectrum Analyzer

d) should support Packet Sniffer Mode

Should be UL2043 Plenum complied

Should support min 500 clients per radio

Should support OFDMA for efficient spectrum utilization, Spatial Reuse (BSS Coloring), Target Wake Time (TWT), UL MU-MIMO & DL- MU-MIMO

Access point Operating Temperature should be: min 0–50°C

Proposed wireless solution OEM should be ISO 9001, ISO 14001 and ISO 27001 certified. Bidders need to provide Publicly available Website Link/document along with the technical bid.

The proposed Access Point should be Wi-Fi6 Certified

Proposed Wireless OEM should be present in Leader magic quadrant of Enterprise Wired and Wireless LAN Infrastructure report in latest Gartner Report of year 2025. Bidders need to provide Publicly available Website Link/document along with the technical bid

12 Core Single Mode armoured Optical Fibre Cable

12Port LIU loaded with pigtail and adapter

All the switches & Wireless Solution should be from same OEM and should support integration with existing firewall for easy management and integration. Management of proposed switches and Wireless solution should be from single pane of glass and management tool

Warranty 3 years comprehensive warranty

Select, Excess (+), Less (-)

Tender Inviting Authority: Info Tech Corporation of Goa Limited

Name of Work: Limited Tender for “Rate Contract for Supply, Installation & Commissioning of ICT Equipments (Tier 4) (Video Conferencing, Display Unit, Mobility Devices etc.)”

Contract No: ITG-IT/1036/RC-ICT/2024/TIER-4/4874

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P GST (If applicable in Percentage) GST Amount in Rs. P HSN / SAC Code

1 86” Interactive Flat Panel Display (IFPD) with OPS

1.01 86" AI Based Interactive display with octacore processor, 8GM RAM, 128GB SSD, I5 OPS, 8GB RAM, 512GB SSD and Windows 11 OS item1 No Excess(+) Full Conversion INR

2.01 CAM 520 Pro 12x zoom, HD PTZ camera item2 No Excess(+) Full Conversion INR

3 Speakerphone for PTZ Camera

3.01 Fone 540 speaker phone item3 No Excess(+) Full Conversion INR

4 L3 Core Switch -- 48*25G and 8-port 40/100 G uplink

4.01 48Port 10/25G (SFP28) Layer3 data centre switch with 8x100G and 2x10G dual power supply, centralised mangement, Integration with existing firewall and 3years OEM premium support. item4 No Excess(+) Full Conversion INR

4.02 SW License for FS-2000 Series Switches to activate Advanced Features item5 No Excess(+) Full Conversion INR

4.03 10 GE SFP+ transceiver module, short range 300m, LC connector, MMF, 850nm, 0°C to 70°C, for systems with SFP+ slots item6 No Excess(+) Full Conversion INR

4.04 10 GE SFP+ transceiver module, long range 10km, LC connector, SMF, 1310nm, 0°C to 85°C, for systems with SFP+ slots item7 No Excess(+) Full Conversion INR

4.05 1 GE SFP transceiver module, long range 10km, LC connector, SMF, 1310nm, -40°C to 85°C, for systems with SFP/SFP+ slots item8 No Excess(+) Full Conversion INR

4.06 1 GE SFP transceiver module, range 30m, RJ45 connector, -40°C to 85°C, for systems with SFP/SFP+ slots item9 No Excess(+) Full Conversion INR

5 Layer 2 Switch

5.01 48port Layer 2 switch controller compatible switch with 48x 1G RJ45 and 4x 10G/1G SFP+/SFP ports and 1x RJ45 console port and OEM Premium Support for 3years item10 No Excess(+) Full Conversion INR

6 Layer 2 PoE Switch

6.01 Layer 2 switch controller compatible PoE switch with 24x 2.5G/1G/100M RJ45 ports - 8x 802.3bt (90W) PoE and 16x 802.3af/at (30W) PoE - and 6x 10G/1G SFP+/SFP ports, and 1x RJ45 console port. Max 780W PoE output limit with smart fan/temperature control and OEM Premium Support for 3years item11 No Excess(+) Full Conversion INR

7.01 Indoor Wireless AP - (Wi-Fi-6 IEEE dual -band 2.4/5 2+2 2 streams 3 radios), internal antennas, 100/1000 Base-T RJ45, BT/BLE, 1x RS-232 RJ45 Serial Port. Integration with existing firewall for centralised management. Ceiling/ wall mount kit included. For power order: 802.3at PoE injector GPI-130(1Gbps)/GPI-145(10Gbps) OEM Premium Support for 3years for access points irem12 No Excess(+) Full Conversion INR

7.02 12 Core Single Mode armoured Optical Fibre Cable irem13 Mtr Excess(+) Full Conversion INR

7.03 12Port LIU loaded with pigtail and adapter irem14 No Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select %

Please Enable Macros to View BoQ information