Electrical General work in Connection with "ABSS: At Aluabari Road Jn. - Provision of Approach Road and Improvement of Circulating Area at 2nd Entry".

Approach Road and Improvement of Circulating Area at 2nd Entry".

Item- 1 Please see item breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply & testing of GI octagonal pole 6 mt long Numbers 60.00 14193.00 851580.00

with foundation bolt, loop box of bakelite sheet

with one 6A SP MCB and 16 sq mm stud type

connector etc. The octagonal pole shall be hot dip

galvanized in single dip. Technical specification

of pole as following:- Height - 6 mt Top dia (A/F) -

70 mm Bottom dia (A/F) - 130 mm Sheet

thickness - 3 mm Base plate (L x B x T) - (200 x

200 x 12) mm Foundation Bolt size (no.x dia) - 4

x 20 dia mm Pitch Circle Dia (PCD) - 200 mm Bolt

length - 600 mm Projected Bolt Length - 100 mm

2 2 Supply & fixing of 1 mtr GI Single arm bracket Numbers 60.00 1615.00 96900.00

(header) and holder with Nut & bolt as per

instruction of Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

3 3 Erection of Rail/Tubular/Octagonal pole to 1/5 th Numbers 60.00 1712.00 102720.00

of its height with CC foundation from base block

(30 cm x 30 cm x 15 cm) including digging &

refilling of earth to a height of 30 cm above

ground level as per drawing

no.CEE/OH@47'40@FGA) in ratio 1:3:6 by cement

sand & Chips 19 mm & down including

excavation of earth.

4 4 Supply, installation, testing & commissioning of Numbers 60.00 14159.00 849540.00

150 Watt LED Street Light made up of pressure

die cast aluminium housing with high efficiency

LEDs as lighting source and lens embedded PC

cover having TOP Opening seperate driver

compartment with IP66 protection and impact

resistance of IK08. as per instruction of Engineer

incharge at site.

5 5 Supply, testing & fixing of LED Rope Light 50 Numbers 18.00 7237.00 130266.00

Meters (Red, Yellow, Blue, Green, White as

required) Waterproof, IP 65 or above as per

instruction of Engineer Incharge at Site.

6 6 Supply, erection, testing & commissioning of 16 Set 1.00 740228.00 740228.00

mt long High Mast Tower with 8 nos. x 250 watt

LED luminaries in symmetrical arrangement

complete with all accessories (Double drum

winch, SS wire rope, integral power tool motor,

head frame, junction box, foundation bolt, LED

aviation light, Fedder pillar with single dial timer

& raising lowering mechanism etc.) including

shallow foundation with M20 grade concrete etc.

as per instruction of Engineer Incharge at Site.

7 7 Supply, installation, testing & commissioning of Numbers 20.00 16193.00 323860.00

250 watt LED flood light luminaires complete with

pressure die cast aluminium housing, IP 66,

Luminous efficacy 120 lm/watt with heat sink

feature, surge protection etc including wire

connection as per instruction of Engineer

incharge at site.

8 8 Supply, wiring, testing & commissioning of FL Numbers 150.00 184.00 27600.00

point/ Lamp point/Fan point (loop wiring) with

angular/ batten holder by FR PVC insulated and

unsheathed single core, 1.5 sq mm multistranded

copper cable to be drawn through rigid PVC

conduit pipe not less than 20 mm dia medium

gauge including bends, joints etc. from main line

under PP shed and 1 sq mm single core FR PVC

insulated and unsheathed copper wire for earth

continuity without controlling switch under PP

shed/FOB as per instruction of Engineer incharge

9 9 Supply, fixing, connection, testing & Numbers 225.00 4503.00 1013175.00

commissioning of Surface/Suspended mounted

LED Trunking Batten 40 watt, extruded aluminum

housing provided for efficient heat dissipation

with polycarbonate diffuser & Built-In electronic

driver. IP 54, CRI 80, THD(%) 10, CCT. 6500 K

Power Factor 0.95, Operating temperature: -10 C

to +50 C, Operating voltage range: 165 V - 270 V,

Average life 50000 hours, LED lumen efficacy 145

lm/W with a viewing angle of 120, Powered by

built-in electronic driver (SMPS based constant

current supply) with Output Open/Short-circuit,

Thermal fold back, 440V 8 Hrs protection, Surge

protection 4 KV & others safety test as per

IS:15885 Part 2/Sec 13. Havells Model No.

ACETRUNKINGADVS40WLED865PSYMBOPCWHT.

KATIHAR DIVISION-ELECTRICAL/N F RLY

10 10 Supply, wiring, testing & commissioning of Numbers 136.00 797.00 108392.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types of

joints and bends as required, complete with 6

amps flush type controlling modular switch to be

mounted on modular GI inner plate and modular

mounting frame of suitable module as per

requirement complete to be concealed in wall as

per instruction of Engineer Incharge at site.

Existing wall should be cut and re-mended to

original finish by contractor's own material. (a) FL

Point/LED Tube Point/LED Recess Light Point/Wall

Bracket Fan Point/LED Mirror Light Point with

12 12 (c) Fan point with c/rose and 5 step fan regulator Numbers 20.00 1450.00 29000.00

14 14 Supply, wiring, testing & commissioning of Numbers 20.00 737.00 14740.00

concealed plug point on separate board complete

with 2 x 6 Amp modular socket and 6/10 amps

modular switch to be mounted on modular GI

inner plate 6M and 6M modular mounting frame

with GI box to be concealed in wall as per

instruction of Engineer Incharge at site. Existing

wall should be cut and re-mended to original

finish by contractor's own material.

15 15 Supply, wiring, testing & commissioning of Numbers 30.00 855.00 25650.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

16 16 Supply, wiring, testing & commissioning of mobile Numbers 20.00 231.00 4620.00

charging point complete with 3 nos 6 A flush type

controlling switch and 3 nos 6 amps, 5-pin socket

and 1 no MCB DP 10 amps fitted on separate half

flush MS board with hylem sheet top including

provision of painted MS tray of size (8 x 6) inch

for mobile holding as per instruction of Engineer

incharge at site.

17 17 Supply, fixing, connection & testing of 40 Watt Numbers 100.00 1890.00 189000.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

18 18 Supply, installation, testing & commissioning of Numbers 20.00 2303.00 46060.00

Surface/Recessed LED luminaire with slim line

CRCA sheet metal body, square type, (System

wattage-18 Watt, Nominal system efficacy 120

lm/watt) suitable for 600 x 600 mm modular

ceiling as per instruction of Engineer incharge at

19 19 Supply and testing of wall mounted bracket fan Numbers 10.00 1998.00 19980.00

400 mm sweep complete with all accessories to

be fixed on wall by suitable fixing arrangement

including connection by 2 core, 1.5 sqmm PVC

insulated and FR PVC Round Sheathed, Copper

Conductor (flexible) industrial cable as per

instruction of Engineer Incharge at Site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

20 20 Supply, fixing, connection, testing & Numbers 6.00 1336.00 8016.00

commissioning of surface mounting sleek LED

mirror light 5 W or 7 W, IP 20, 1 ft version powder

coated CRCA housing, high output diffuser

including suitable fixing arrangement on surface

as per instruction of Engineer incharge at site.

21 21 Supply, fixing & testing and commissioning of Numbers 20.00 670.00 13400.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

22 22 Fixing, testing & commissioning of ceiling fan Numbers 20.00 46.00 920.00

with supply & fixing of MS clamp with hook, nut,

bolt, washer etc. as per instruction of Engineer

incharge at site. (Fan will be supplied by Railway)

23 23 Supply, installation, testing & commissioning of Numbers 12.00 2824.00 33888.00

300 mm sweep (metallic) heavy duty exhaust

fan, 1400 RPM complete with fixing on wall by

suitable size bolts & nuts grouted on wall as per

instruction of Engineer incharge at site.

24 24 Supply, wiring & testing of main wire by 2.5 sq Metre 800.00 75.00 60000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

25 25 Supply, wiring & testing of main wire by 4 sq mm, Metre 800.00 87.00 69600.00

Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694

concealed in wall through PVC rigid conduit pipe

not less than 20 mm dia as per instruction of

Engineer incharge at site.

26 26 Supply, wiring & testing of main wire by 6 sq mm, Metre 500.00 100.00 50000.00

Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694 through

PVC rigid conduit pipe/polythene pipe not less

than 20 mm dia as per instruction of Engineer

incharge at site.

27 27 Supply, wiring & testing of main wire by 10 sq Metre 500.00 110.00 55000.00

mm, Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts and earth continuity wire by

1.0 sq mm FR-LSH PVC Insulated Industrial Grade

Copper Conductor Conforming to IS: 694 through

PVC rigid conduit pipe/polythene pipe not less

than 25 mm dia as per instruction of Engineer

incharge at site.

28 28 Supply, installation, testing & commissioning of Numbers 8.00 1193.00 9544.00

modular power unit complete with 32 Amp mini

MCB DP "C" series 3kA , 25 amps starter, 25 Amp

Socket and 25 Amp plug to be mounted on 6

module GI box, 6 module combined plate

concealed on wall and wiring by 6 sq mm, Single

Core FR-LSH PVC Insulated Industrial Grade

Copper Conductor (Unsheathed) Flexible Cables,

1100 Volts with earth coninuity wire by 1 sq mm

copper cable Conforming to IS: 694 to be drawn

through Rigid PVC conduit pipe not less than 20

mm dia as per instruction of Engineer incharge at

site. (For AC & Geyser)

KATIHAR DIVISION-ELECTRICAL/N F RLY

29 29 Supply, installation, testing & commissioning of Numbers 6.00 54091.00 324546.00

Inverter Split Air Conditioners 1.5 Ton, (BEE star

rating-5 star, Coil material-Copper, Echo-friendly

refrigerant, Nominal cooling capacity in Ton /

(kcal/hr)-1.5 Ton / 4500 kcal/hr) with all

accessories as per OEM suitable for operation on

230V AC ,single phase, 50 Hz as per instruction of

Engineer incharge at site. Re-mending work

should be done after installation of RAC. (with 1

pair outdoor wall stand) (Industrial AC/Heavyduty

30 30 Supply, installation, testing & commissioning of Metre 200.00 1561.00 312200.00

Hot Dipped Galvanized Wire Mesh Cable Tray of

size (Depth- 54 x Width- 150) mm, made of

carbon steel (ASTM A510, Grade-1008 specified)

finished by electrozinc plating (ASTM B 633

specified) alongwith all accessories like suitable

type of splices, locking tab, divider coupler,

preclick, SWK, clamp, Tee, bend, bracket, nut,

bolts etc. Trays should comply standard EN ISO

1461: atleast 550 h of SST. Assemblies with

specific fire resistant properties must have an

E30-E90 certificate. Rod-dia must be from 3.9

mm to 5.9 mm or higher and as per site site

requirement and as per instruction of engineer

incharge at site.

31 31 Supply, installation, commissioning & testing of Square 72.00 1772.00 127584.00

LED indication station name board (Length of Foot

board will be as per proportion of letter so that all

the 4 side of the board will have extra space)

with channel letters with 3.75 ft. in lenght with

suitable widen and 4 mm projection size which

inside ACP board (Brand- ALUDECOR, category-

AL 33 series exterior & thikness-3 mm) with

acrylic face on front and having Sumsung 5630

LED's (Shape- Lens type, operating voltage- 12 V

DC, carring current-80 mA, power Dissipation-

0.96 watt, working hours-50000, case material-

ABS ,protection-IP68) inside for illumination

letters in English, Hindi, Bengali or regional

language complete with all materials including

provision of erection structure made of MS

angle/channel/flat duly painted with aluminium

paint over a coat of red oxide primer with CC

foundation (1:3:6) of cement, sand and stone

chips as required at site and as per instruction of

Egnineer incharge at site.

32 32 Design, manufacture, display of wall /hanging / Square 40.00 2868.00 114720.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the integral

mounting arrangements with sturdy structural

frame and ACP cladding on the back side of the

signage to avoid rusting and entry of dust. The

LED board shall have uniform illumination with 4-

8 W / sq. ft and with brightness more than

ambient light. Suitable size end cap of 1.5 mm

thick SS 304 should be provided. (Signage Board

should as per Railway Board Letter No. 2023/SD-

KATIHAR DIVISION-ELECTRICAL/N F RLY

33 33 Erection and installation of wall / hanging / floor Square 40.00 287.00 11480.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm thickness

and shall be firmly pasted on display sheets. The

mounting arrangement shall be hanging, wall

mounting, ceiling mounting, pole mounting or

floor mounting and as per site requirement. The

signage shall have the integral mounting

arrangements with sturdy structural frame and

ACP cladding on the back side of the signage to

avoid rusting and entry of dust. The LED board

shall have uniform illumination with 4-8 W / sq. ft

and with brightness more than ambient light.

Suitable size end cap of 1.5 mm thick SS 304

should be provided. (Signage Board should as per

Railway Board Letter No. 2023/SD-II/22/07/02

34 34 Supply, installing, testing & commissioning of Numbers 1.00 404250.00 404250.00

High Volume Low Speed (HVLS) FAN, 3 Phase, 1.2

KW, 20 ft. Diameter, 6 (Six) Blade with Control

Panel and all acessories as per Instruction of

Engineer Incharge at Site.

35 35 Horizontal machine boring of 300 mm dia hole Metre 100.00 2538.00 253800.00

across track/Road/High drain etc. at a depth of

1.0 mtr below of ground level with suitable boring

instruments & neessary arrangement and as per

technical procedure.

36 36 Supply, laying, commissioning & testing of CI Pipe Metre 150.00 877.00 131550.00

100 mm dia Class LA type (IS 1536-2001) to be

laid partly along the pole and partly through

ground under railway track/road in cable trench

for protection of cable with suitable fixing

arrangement by MS clamp, nut,bolt,washer

etc.as per instruction of Engineer incharge at

37 37 Supply, laying, commissioning & testing of HDPE Metre 300.00 383.00 114900.00

pipe 110 mm dia PN-6 grade conforming IS

4984/1995 or latest to to be laid partly along the

p o l e with suitable fixing arrangement by MS

clamp m ade of MS flat of size 50x6 mm and

suitable size nut, bolt, washer as per instruction

of Engineer incharge at site.

38 38 Supply, laying, commissioning & testing of HDPE Metre 1000.00 70.00 70000.00

pipe 50 mm dia, PN-6 grade to be laid partly

along the p o l e / w a l l with suitable fixing

arrangement by MS clamp made of MS flat of size

50x6 mm and suitable size nut, bolt, washer etc

as per instruction of Engineer Incharge at site.

39 39 Supply, fixing, testing & commissioning of IP Numbers 10.00 10035.00 100350.00

66/67 thermoplastic cable junction box / loop box

of size (300 x 450 x 170) mm with knockouts &

04 nos terminals as per instruction of Engineer

Incharge at Site.

40 40 Supply, fixing, testing & commissioning of IP Numbers 15.00 5291.00 79365.00

66/67 thermoplastic cable junction box / loop box

of size (210 x 310 x 116) mm with knockouts &

04 nos terminals as per instruction of Engineer

incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

41 41 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 30.00 4349.00 130470.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal, soldered

end terminal etc. and construction of earth pit

covered with RCC cover slab12.7 mm thickness

and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as

per instruction of Engineer Incharge at site.

42 42 (a) Supply, installation, testing & commissioning Set 2.00 12330.00 24660.00

of 4 way VTPN MCCB DB (MCCB+12 modules)

with IP 43 grade protection, metal door with wire

sets, busbar, earth bar, blanking plates, cable

ties etc with supply and fixing of following

MCCB/MCB as per instruction of Engineer

incharge at site.

Conforms to IS/IEC 60898 - 1:2002

45 45 (a) Supply, installation, testing & commissioning Set 6.00 2005.00 12030.00

of 12 way SPN Distribution Board, Flush/Surface

mounting, IP 43 grade protection with copper bus

bar, fully shrouded neutral bar, earth bar, cable

ties, metal double door as per IS 8623 - III with

supply and fixing of following RCBO/MCB's as per

instruction of Engineer Incharge at Site.

Conforms to IS/IEC 60898 - 1:2002

Conforms to IS/IEC 60898 - 1:2002

48 48 (a) Supply, fabrication, erection, testing, Set 1.00 32916.00 32916.00

commissioning & painting of floor mounted

powder coated cubicle panel board (Modular look)

of suitable size (neither big nor small) ), outdoor

type with double door made of suitable size

MS/GI angle 50 x 50 x 6 mm, MS/GI flat 50 x 6

mm, 14 SWG MS sheet/Powder coated CRCA

sheet with provision of weather proof,rust

proof,dust proof,water proof having internal

rubber gasket with supply and fixing of following

ACB/MCCB/Bus bar/Meter etc. (Connections to be

made by copper strips, glands should be

provided at cable entry and exit, components

should be compartmentalized, Each compartment

will be provided with the door and pad locking

arrangement. The compartment illumination

lamp with door operated switch shall be provided

for each compartment. Panel board drawing

approval must be obtained with clear indication

of make of items of components):-

52 52 (e) Copper bus bar 200 amps made of electrolytic Set 1.00 1222.00 1222.00

grade copper consisting of 4 bars ( 3 Ph and

Neutral ) ( Bus bar should have insulation cover)

53 53 (f) Digital voltmeter (0-500) amps and Digital Set 1.00 5581.00 5581.00

ammeter (0-500) amps with s/switch and CTs

55 55 (h) Supply, installation and testing of Astro Set 1.00 9777.00 9777.00

(Analog) time switch with 3 pole 63 amp

contractor and suitable thermoplastic box and

fitted on mounting plate/DIN rail.

KATIHAR DIVISION-ELECTRICAL/N F RLY

56 56 Supply, laying & testing of 3 core, 2.5 sq mm PVC Metre 745.00 147.00 109515.00

insulated and FR PVC Round Sheathed, Copper

Conductor (flexible) industrial cable, 1100 Volt,

conforming to IS 694 as per instruction of

Engineer Incharge at Site.

57 57 Laying, commissioning & testing of HT/LT Metre 2000.00 55.00 110000.00

XLPE/PVC cable of different sizes partly along the

pole and partly through ground in cable trench by

excavation of ground below 1.5 mt from ground

level with suitable fixing arrangement by MS

clamp of size 50x6 mm and suitable size nut,

bolt. Loading, Unloading & Carrying of cable to

actual work site by contractor's own

arrangement. (Aluminium Crimping Socket

should be provided for each Cable Termination).

(Cable will be supplied by Railway)

58 58 Excavation of cable trench (0.3 x 1.5) mtr below Metre 1010.00 148.00 149480.00

ground level for laying of cable & refilling the soil

after digging the earth as per instruction of

Engineer incharge at site. Cable should be laid on

bedding of height 75 mm sand at the bottom of

trench, and covering it with additional sand of

height 75 mm and thereafter protecing it by

mean of bricks before refilling the soil as per IS