COMPREHENSIVE REPAIRS TO PLUMBING WK SANITARY FITTINGS, JOINERY WK, CEILING ROOF AND FLOORS, INCL PERD SERVICES TO CERTAIN BLDGS AT NAUGAM UNDER GE 969 EWS AND REPAIRS/MAINT OF INTERNAL WIRING INCL FITTING FIXTURE AT RAMPUR, URI AND NAUGAM

Amount

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-

(a) all as per item no.02 above but for One light point controlled by one switch.

(b) all as per item no.02 above but for One switch socket combination 5 Amps on independent board.

(c) all as per item no.02 above but for One switch socket outlet 5 Amps on same board with other switches.

M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.

S&F fixed in repair Switch piano flush type single pole, one way 5/6 Amp, complete all as specified and as directed.

S&F in repair Switch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete all as specified and as directed.

S&F in repair switch socket outlet two in 1 3 Pin, 5 Amp, 230 Volts complete all as specified and as directed.

S&F in repair Switch socket combination flush type multipurpose 3/5 pin suitable for 15 Amp complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed.

Supply and fixing LED lights fitting 1X20 Watt , 4 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED lights fitting 1X10 Watt, 2 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED Lamp 9 W 'T' type. complete all as specified and as directed.

S&F in repair Lamp holder/angle batten, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed.

MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.

MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.

S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed.

Supplying Only PVC flat twin core cable PVC insulated aluminium conductor size 10 sqmm 2 core.

Supplying Only flat twin core cable PVC insulated aluminium conductor size 16 sqmmm 2 core.

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable).

Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials.

Supply only following items complete all as directed by Engr-in-Charge.

(a) Switch piano 5 Amp

(b) Switch piano 15/16 Amp

(c) Angle/ Batten holder

(d) 5 Amps switch socket combination 3/5 pin type along with box.

(e) 15 Amps switch socket combination 3/5 pin type along with box.

(f) Modular switch flush type one way 6 Amp, 230 volts

(g) Modular switch flush type one way 16 Amp, 230 volts

(h) Modular socket 6 Amp 2/3 pin combined 2 module

(i) Modular socket 6 /16 Amp 2/3 pin combined 2 module

(j) Top plug 5 Amp socket complete

(k) Top plug 15 Amp socket complete

(l) Change over 32 Amp socket complete

(j) Insulation tape of size 32/40mm of Red, Yellow, Blue and Black colour

(k) PVC Casing and caping complete all as specified

(l) PVC Conduit pipe 20mm complete all as specified

(m) Supply Only SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed.

(n) Supply Only round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

(o) Supply Only Wall mounted Fan 400 mm sweep complete all as specified and as directed.

(q) Supply only 1.5 sqmm cable FRLSH insulated industrial cables complete all as specified and as directed.

(r) Supply only 2.5 sqmm cable FRLSH insulated industrial cables, complete all as specified and as directed.

(s) MCB single pole 6 Amp,complete all as specified and as directed.

(t) MCB single pole 10 Amp,complete all as specified and as directed.

(w) MCB single pole 16 Amp,complete all as specified and as directed.

(x) MCB single pole 20 Amp,complete all as specified and as directed.

(y)MCB single pole 32 Amp,complete all as specified and as directed.

(z)MCB double pole 40 Amp,

(aa) MCB Double pole 63 Amp,complete all as specified and as directed.

(ab) Supply onlyLED lights fitting 1X20 Watt , 4 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

(ac) S&F LED Lamp 9 W 'T' type, complete all as specified and as directed.

(ad) S&F LED Lamp 20 W 'T' type, complete all as specified and as directed.

Supply only Track light bed side decorative type complete all as specified.

S&F heating element (round/traingular) including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape, complete all as specified and directed.

S&F heating element (round/traingular) including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape, complete all as specified and directed.

S&F Thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25 / 35 / 50 ltrs including taking down existing unserviceable thermostat, complete all as specified and as directed.

S&F high pressure valve with dead weight suitable for 25 / 50 ltrs capacity Geysers including taking down existing unserviceable high pressure valve complete all as specified and directed.

S&F PVC connecting pipe 18" long with brass adopters for cold water and connecting up with complete for 25 /35 / 50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and directed.

S&F PVC connecting pipe 18" long with brass adopters for hot water and connecting up with complete for 25 /35 / 50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and directed.

S&F in repairs brass non return valve (check valve) 15mm bore with necessary GI specials including taking down existing unserviceable non return valve complete all as specified and as directed.

S&F exhaust fan/brisk air fan of size 380 mm sweep, Steel body complete all as specified and as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed.

Demoliton of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement.complete all as specified and directed.

M&L for non skid coloured ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Sand filling under floors or in foundations, including watering and consolidation, complete all as specified and directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30m x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes, complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 450x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) .complete all as specified and directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar .complete all as specified and directed.

M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 .complete all as specified and directed.

M&L Walling of random rubble masonry uncoursed built in CM (1:6) .complete all as specified and directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc.

M&L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement .complete all as specified and directed.

Preparation of Preparing surfaces plastered New surfaces walls and applying two coat of OBD complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on walls over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets.

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall including L/U shape edge profile and base/support for fixing in wall surfaces complete all as specified and directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the ceiling including L/U shape edge profile and base/support for fixing complete all as specified and directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L 6 mm thick Plywood on wall panellingg, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L 6 mm thick Plywood in ceiling, grade BWP,type BB, fixed with nails to timber frame work, complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 6 & n.exc 13 Sqcm in section complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling.complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and directed.

S&F 80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and as directed.

All as per item No. 97 above but except sheeting removing and refixing in repair, complete all as specified and as directed.

M&L two coat of red oxide including preparation of new steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F Aluminium handles 100 mm , cast type,anodised complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type,anodised complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete all as specified and as directed.

M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth, Complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F Softwood 2nd class Plan one side with butt joints eaves boards 20 mm thick, complete all as specified and as directed.

M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, Complete all as specified and as directed.

S&F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting, complete all as specified and directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail, complete all as specified.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling, complete all as specified and as directed.

M&L for french polishing on surfaces of any descreption, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats, complete all as specified and as directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick fixed to timber frame work, complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.

M&L two coats of synthetic enamel paint including preparation of surface on old wooden sruface over 10 cm width or girth complete all as specified and as directed.

Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings,complete all as specified and as directed.

Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed.

Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrscomplete all as specified and as directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated, complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule.,.complete all as specified and directed.

S&F in repair stop valves fancy type chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore,complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long. .complete all as specified and directed.

S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed.complete all as specified and directed.

S&F in repairs vitreous chine wash down water closet pan (Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap.complete all as specified and directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed.

S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane including hacking out old brioken glass, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed.

S&F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed, complete all as specified and as directed.

S&F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc, complete all as specified and as directed.

S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowka, complete all as specified and directed.

S&F in repairs Vitreous China Wall Hung coupled closet including cistern with lid dual flush fitting with PVC seat cover size not less than 665x360x765 mm (white) including fixing bolt complete all as specified Make-Johnsons or equivalent, complete all as specified and directed.

S&F in repairs CP health flucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified, complete all as specified and directed.

S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified, complete all as specified and directed.

S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) .complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples .complete all as specified and directed.

S & F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia fixed, completed all as specified .

S&F in repairs Single piece WC with UF soft closet, seat cover ,hinges, fixing acessories including flushing cistern sizee (370x690x795mm) includibg S trap 300mm, health faucet ad jet spray complete all as specified and directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed.

M&L for preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing on old plastered or un-plastered surface of walls complete all as specified and as station policy or directed by Engr-in-Charge (Note : Wk will be requisitioned based on wk order and paid as per site and user requirement)

All as per above item No. 173 but applying one coat of white washing on ceilings.

All as per above item No. 173 but applying one coat of oil bound distempering with emulsion on walls.

M&L for complete removal of existing treatment of surfaces and applying two coats of oil bound distempering with emulsion on walls over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and as directed.

All as per above item No. 176 but applying one coat of cement base paint on walls of external surfaces.

M&L for complete removal of existing treatment of surfaces and applying two coats of cement base paint on walls surfaces.

M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfacs complete all as specified and directed.

Preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted galvanised surfaces (on CGI/PGI roof sheet) of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated plastered or un-plastered surface of wall and comices etc; including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc, and apply one coat of plastic emulsion paint interior grade complete all as specified and as directed.

All as per above item No. 184 but two coats of plastic emulsion paint interior grade after complete removal of existing treatment from internal surfaces of wall by wire brushing, washing, rubbing down and stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Biral/JK wall care putty to obtain a smooth regular/even finish using sand paper over a coat of primer, Complete all as specified and as directed.

M&L for applying of 3mm thick wall care putty on wall surfaces etc complete all as specified and as directed. (Note : Wk will be requisitioned based on wk order and paid as per site and user requirement)

Note:- Schedule of credit Rs 1,08,889.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/s ABDUL QAYOOM LONE & BROS (BID ID -3184806)

M/S GHULAM RASOOL LONE (BID ID -3182795)

M/S SUMJI BROTHERS (BID ID -3182404)

M/S ARTECH BUILDERS AND SUPPLIERS (BID ID -3182330)

M/S ESS EMM ENTERPRISES (BID ID -3182341)

ALI MOHD NAJAR (BID ID -3182420)

M/s ABDUL AHAD AND SONS (BID ID -3182332)