REPAIR / MAINT OF LAND SCAPING LIGHTS FITTNG, GATE LIGHTS, BUILDING STREET LIGHTS AND TIMER CONTROL PANEL ALONG WITH CERTAIN OTHER CONNECTED WORKS AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth for foundation / fixing pole / laying cable and pipe line etc or for man hole etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers, not exceeding 25 cm thick using excavated soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 6 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

Material & labour for 50 mm dia bore GI steel tubing light grade for protection of cable / earth continuity conductor fixed to poles / walls / roof or laid in floors, road, crossing or ducts fixed with clamps , bolts nuts and washer etc including taking down old pipe complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning 18cm before and 5 cm after laying of under ground electric cable, thickness specified in SSR Part -I, including punning down of sand in layer complete all as specified and directed.

Taking down old un reinforced precast concrete cable cover any type from the trenches etc complete all as specified and directed.

Laying only PCC cable cover for LT / HT UG cable, of any description retrieved from item No 9, complete all as specified and directed.

Supply & laying ISI marked & conforming to IS-5820-1970 unreinforced precast concrete cable cover Class LV, flat of size 250 mm x 150 mm x 40 mm in trenches as protection to LT UG cable complete all as specified and directed.

S&F LED Street Light fitting 25 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, Low THD, PMMA grade high quality transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed.

S&F LED flood light fitting 70 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with unique lens system for enhanced uniform illumination and weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted with silicon gasket for IP 66 protection in cast aluminium housing with SS screws fixed on existing bracket & connecting, including taking down old light fitting of any description complete all as specified and directed.

S&F LED flood light fitting 100 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality transmittance lens, Epoxy powder coated die cast aluminium housing with unique lens system for enhanced uniform illumination and weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted with silicon gasket for IP 66 protection in cast aluminium housing with SS screws fixed on existing bracket & connecting, including taking down old light fitting of any description complete all as specified and directed.

S&F LED flood light fitting 180/210 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, Low THD, PMMA grade high quality transmittance lens, Epoxy powder coated die cast aluminium housing with unique lens system for enhanced uniform illumination and weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted with silicon gasket for IP 66 protection in cast aluminium housing with SS screws fixed on existing bracket & connecting, including taking down old light fitting of any description complete all as specified and directed.

Taking down carefully (copper/aluminium) submain wiring complete of any type (batten/surface conduit or concealed) for socket point or power point complete with all fittings such as swiches sockets pendants etc complete and making good distuebed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for submain wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 4sqmm copper cable & 1 run of 4.0 sqmm copper cable in and including 20mm PVC conduit shall be measured as one unit

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 1.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC conduit shall be measured as one unit

S&F in repairs pole mounted junction box (street light boxes) weatherproof cabinets IP -65-IK-09 class II with removable chasis and faceplates,lockable door handle, sealable cover, self extinguishing conforms to EN 60439-3, for single phase lighting system, suitable for 6 module with 1 row complete all as specified and directed.

S & F in repairs contactor 25A 2NO, suitable for 230V AC complete all as specified and directed.

S & F in repairs MCB DP 32A DX3 DP, suitable for 230V AC complete all as specified and directed.

Supply & fix in repair digital weekly timer Switch of supply voltage 240vAC, 50/60 HZ complete all as specified and directed.

Supply and fix in repair LED 5 Watt Round (Warm white) spot light based down lighter 24 V with inbuilt driver, 50 HZ T-35 'C', 63000 K, complete all as specified and directed.

S & F in repair LED round spot light 3 W ( Warm white) capacity, CCT :- 3000 K, working voltage level 220V-240V complete all as specified and directed.

S & F in repair LED round spot light 2 W capacity, CCT :- 3000 K, working voltage level 220V-240V complete all as specified and directed.

S & F in repair LED panel light round type 15 watt (Warm white) cap complete all as specified and directed.

Supply and fix in repair LED 10 Watt round panel light fitting (warm white) 240 V 50 HZ with inbuilt driver mechanism complete all as specified and directed.

S & F in repair LED candle 6watt (E14 cap) warm white complete all as specified and directed.

S & F in repair LED candle 3watt (E27 cap) warm white complete all as specified and directed.

S & F in repair LED bulb 9/12watt, 230 volts suitable for threaded / pin type holder fitment (warm white) complete all as specified and directed.

Supply and fix in repair LED decorative post of lantern for 360degree indirect light with IP 65 protection, glare free and better uniformity light, cap 40 Watt fittings including all accessories complete fixing accessories fixed in position complete all as specified and directed.

Supply and Fix LED bollard light fitting 9/10 watt (warm white / white), inbuilt driver mechanism, robustly designed, IP 65/IK10 protection with base plate and provision of wire 2.0m copper conductor from fitting to connection point incl taking down old unsv light fitting complete all as specified and directed.

M &L for servicing / cleaning / maintenance of water fountain by bailing out unclear water and cleaning of tiles inside and outside using suitable descaling agent and allowing fountain to becomes wet, minor repair to pipe and nozzles, gate valves and other connected accessories incl minor repair to under water motor and electrical connection complete all as specified and directed.

M&L for repairing / servicing open well submersible monoblock pump set of capacity 3 to 5 HP by dismantling the pump and motor, over hauling of pump by replacing the complete worn out parts such as cast iron impeller, bearing, water seal, repairing the shaft by machining, welding, grinding, polishing etc, including servicing of electric motor suitable capacity with replacement of worn out bearing for driven and non driven ends, reassembling the pump and motor after complete servicing and repair and testing on load complete all as specified and directed.

Supply and Fix non integral LED flexible strip light with high brightness for outdoor applications suitable for 15 watt, 4000K, 230 volts complete with fixing arrangement incl taking down old unsv strip complete all as specified and directed.

M&L for dismantling of existing defective open well submersible monoblock pump set of capacity 3 to 5 HP, three phase, 415 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor (winding wire) of suitable gauge and size complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of induction motor complete all as specified and directed.

Supply and fixing in repair recess mounted LED luminaire with full diffuser 36 watt of 2x2 grid for new age work space, powder coated luminaire with minimum 100lm/watt efficiency, 25000 to 50000 working hours and 6500CCT complete all as specified and directed.

Supply and fix in repair round recess mounted LED luminaire with full diffuser 15/16 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy, 25000 to 50000 working hours and 6500CCT complete all as specified and directed.

Supply and fix in repair recess mounted LED slim downlight square luminaire with full diffuser 18 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy, 25000 to 50000 working hours and 6000CCT complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz 0.14A suiatble for 18 watt LEd downlighter Secondary: constant current DC:300mA with thermal,overload and short circuit protection complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz 0.055 -0.080A suiatble for 16watt LED downlighter Secondary: constant current DC:300mA with thermal, overload and short circuit protection complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz suiatble for 36watt (2x2 grid) LED recess mounted fitting Secondary: constant current DC:300mA with thermal,overload and short circuit protection complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz suiatble for 9/10watt LED bollard fitting Secondary: constant current DC:300mA with thermal, overload and short circuit protection complete all as specified and directed.

Supply and fix in repair round recess mounted LED slim luminaire with full diffuser 24 watt suitable for opearting voltage 220-240VAC and inbuilt driver, powder coated luminaire with minimum 100lm/watt efficacy, 25000 to 50000 working hours and 6000CCT complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz suiatble for 24watt slim downlighter Secondary: constant current DC:300mA with thermal, overload and short circuit protection complete all as specified and directed.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz suiatble for 40 watt post top fitting Secondary: constant current DC:300mA with thermal, overload and short circuit protection complete all as specified and directed.

Supply and fix in repair wall mounted cabinets made with metal textured polyester coating providing excellent corrosion and scratch resistance front door Openable along with inbuilt accessories made as per IP- 55 standard along with (a) inbuilt one two pole contactor of 25 Amp rating make BCH Cat part No :- CPG 216, (b) one nos 32 Amp two pole MCBs (c) one No 32 amp single pole MCB, the box size will be 200 mm x 200mm x 120 mm (H X W X D) BCH cat No :- BIL - 50000 (d)Digital timer clock type 110-240 VAC 1 C/O Base/DIN 25 ON/OFF Make L & T, complete all as specified and directed.

S & F in repair brass nozzle 25mm tulip / foam jet nozzle threaded with suitable size packing and washers for fountain complete all as specified and directed.

S & F in repair brass mist nozzles, double threaded socket and washer with suitable size packing and washers for fountain complete all as specified and directed. Note: (i) The size of nozzle shall be as per site requirement. (ii) Contractor shall submit design and get it approved by Engr-in-charge.

S&F in repair butterfly valves of size 40 mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supply & laying in repair flat three core PVC Insulated & PVC sheathed industrial copper cable for submersible pump motors 10 Sqmm 3 core complete all as specified and directed.

Supply and fix in repair LED decorative post of lantern 45 Watt fittings including all accessories complete fixing accessories and clamp including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and execavation as per manufactuer's instruction complete all as specified and directed.

Taking down old fountain light and supply and fix new fountain light RGB LED fountain light with controller 12 V, 1X12W colourful water proof underwater submersible fountain lights in RGB Combination of colours, IP 68 complete all as specified and directed.

S&F in repair round cable PVC insulated, PVC sheathed, with 3 core copper conductor of size 2.5 Sqmm, ISI marked & connecting complete all as specified and directed.

Supply and fix GI pipe 50 mm dia heavy grade (as garden light pole) including PCC work, Cutting, making hole for cable and welding works as required including painting complete all as specified and directed.

Supply and fix in repair LED decorative post of lantern warm white for 360degree indirect light with IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination cap 35/40 Watt fittings including all accessories complete fixing accessories fixed in position complete all as specified and directed.

Supply and fix decorative post of lantern fitting suitable for 5 to 12 W LED bulb, fully cast iron body finished with polyurethane pain (with prior tretments) with acrylic window cover, B-22 ABS holder and provision of wire 2.0m copper conductor from fitting to connection point incl taking down old unsv light fitting complete all as specified and directed.

BHAVNA IMPERIAL ENTERPRISE (BID ID -3406587)

DWARKADHISH ENTERPRISE (BID ID -3402299)

SURESH ELECTRICALS (BID ID -3406502)