SPL REPAIR OF OVERHEAD WATER TANKS, DISTRIBUTION OF WATER PIPELINES AND ELECTRIC METERS AT AF STN MISSAMARI UNDER GE MISAMARI

Amount

Dismantling Structural steel work i.e. door , gates but excluding framed truss etc complete all as specified and as directed.

Erection or fixing only rolled section as in main and cross beam, hip and jack rafter purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE-410-W (gde-E-250) complete all as specified and as directed.

M&L rolled section as in main and cross beam, hip and jack rafter purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE-410-W (gde-E-250) complete all as specified and as directed.

Supply & installation of SOVISY - SMC panel Tank,conforming to : IS 14399 (Part 1 & 2) : 1996 & IS 4249 : 1967 of size (3.5L x 3.5B x 2.5 H)

M&L preparing new or previously untreated steel and iron surfaces of any description , over 10cm width or girth and applying two coats of synthetic enamel paint (first quality) over a red oxide/zinc chrome primer , complete all as specified all as specified and as directed.

M&L Old steel and iron surfaces of any description , over 10cm width or girth and applying two coats of synthetic enamel paint ( first quality ) complete all as specified and as directed.

Surface dressing n.exc 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for hardcore of gauge n.exc 63mm deposited, spread & levelled in layers n.exc 15cm thick, watered & rammed to a true surface with broken stone or boulders complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded aggregate) as in path/pavings finished the surface even and fair all as directed.

M&L for chequred cement concrete tiles 20cmx20cmx25mm with grey cement and pegment set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.50 mtr in depth for taking out /laying of CI/GI Pipe Lines etc., forming botttom surfaces of trenches to requiredlevel and gradient and getting out in soft/ loose soil complete all as specified and as directed by Engr-in charge.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, including providing heaps along the trenches with surplus soil ,complete all as specified and as directed by Engr-in charge.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point as directed by Engr-in-Charge.

Taking up old cast iron water mains 150mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints and recovering lead. Serviceable Pipes Leads etc keep in safe custody for reuse,etc complete all as specified and as directed by Engr-in-charge.

Taking up old GI water mains 100mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints and recovering lead. Serviceable Pipes Leads etc keep in safe custody for reuse,etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing/PPR 50 /63 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and asdirected by Engr-in-charge.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 150mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge. Note 1- Excavation,DI Specials shall be measured and paid separately. Note 2- Rate of rubber gasket joint shall be included in quoted rate. Make:- Electrosteel and equivalent in Jindal and Tata.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-7 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge. Note 1- Excavation,DI Specials shall be measured and paid separately. Note- Rate of rubber gasket joint shall be included in quoted rate. Note 2- Rate of rubber gasket joint shall be included in quoted rate. Make:- Electrosteel and equivalent in Jindal and Tata.

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately. Make:- SFMC and equivalent in Reliance and Fusion.

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property )fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 63 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed by Engr-in-charge. Make:- SFMC and equivalent in Reliance and Fusion.

M & L For making connections of PP-R distribution branch with PPR Main of outer dia of pipes 16mm to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed by Engr-in-charge.

M & L run lead joints for pipes and fittings (spigot and socket ends) 100 mm bore (dia) and testing complete all as specified and as directed by Engr-in charge.

M & L run lead joints for pipes and fittings (spigot and socket ends) 150 mm bore (dia) and testing complete all as specified and as directed by Engr-in charge.

M&L Cast Iron Sluice Valve 150mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve,complete all as specified and as directed by Engr-in charge. Make:- Leader/ Kirloskar/upadhya

M&L Cast Iron Sluice Valve 100mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve,complete all as specified and as directed by Engr-in charge.Make:- Leader/ Kirloskar/upadhya

Cutting of existing CI/DI pipe laid 100 mm dia for inserting Tees for new connection of 100 mm x 63 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63 mm PPR pipe into 100 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63mm x 32 mm including cutting and making fusion joint etc all as specified and directed.

M&L Construction Brick Masonry Valve Pit of size 900X900X900 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggre-gate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40 x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedd -ed in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil including demolition of unserviceable Valve Pit, complete all as specified and as directed by Engr-in charge..

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI/DI/PPR Tubing 50 to 100 mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI/DI/PPR Pipe laid will be measured and paid separately under appropriate Item.

M&L DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore complete all as specified and as directed by Engr-in charge.

Taking down unsv Old analog meters of any type and any capacity incl taking out MCB/s Connection complete including depositing old unsv meters to MES stores in custody of Engr-in-charge complete all as specified and directed.

Taking down carefully unsv aluminium submain wiring of any type/size including conduit /casing and earth wire and making good distributed surface of walls /ceiling matching with existing colour etc. complete all as directed.

Supply, installation ,testing and commissioning as in replacement of Single phase 2 wire 240 V 10-60A Class 1.0 Prepaid Meter as per IS 15884, frequency 50 Hz, Complying to IP51 with LCD Display ,KWH LED, encrypted STS based token system with Home display Unit complete alongwith parallel consumer interface unit and soft token transfer device at house , with facility of meter to generate ABC code(Authenticated Billing Code) for monthly Energy usage bill generation ,numeric keypad for token entry with LED for credit status indication, push button for scroll and having features for load disconnection in case the credit limit become zero or increase of load then permissible limit ,reconnection and disconnection of load, buzzer at Consumer interface unit to give alarm in case of low credit and overloading and data download port for last 25 days (minimum) , Relays provided for phase and neutral disconnection, programmable friendly hours/day, holidays, slab/time -of-day tariff structure,optional consumer interface unit (CIU) available with USB dongle token carrier for recharging,temper event and load survey for last 45 days with all standard anti temper features all as specified and directed. Model :- Taurus, Make L&T Meters, and equivalent in ABB,Secure and Genus

Supply, installation ,testing and commissioning as in replacement of Three phase 4 wire 415 V 10-60A Class 1.0 Prepaid Meter as per IS 15884, frequency 50 Hz, Complying to IP51 with LCD Display ,KWH LED, encrypted STS based token system with Home display Unit complete alongwith parallel consumer interface unit and soft token transfer device at house , with facility of meter to generate ABC code(Authenticated Billing Code) for monthly Energy usage bill generation ,numeric keypad for token entry with LED for credit status indication, push button for scroll and having features for load disconnection in case the credit limit become zero or increase of load then permissible limit ,reconnection and disconnection of load, buzzer at Consumer interface unit to give alarm in case of low credit and overloading and data download port for last 25 days (minimum) , Relays provided for phase and neutral disconnection, programmable friendly hours/day, holidays, slab/time -of-day tariff structure,optional consumer interface unit (CIU) available with USB dongle token carrier for recharging,temper event and load survey for last 45 days with all standard anti temper features all as specified and directed. Model :- Taurus, Make L&T Meters, and equivalent in ABB,Secure and Genus

Supply and installation of Online Vending Software with dedicated login along with Training and Demonstration and supply of connection cable for connecting Meter with Home display Unit Complete all as specified and directed.

Supply and installation of PC/Laptop with window 10 or above OS with minimum 4 GB RAM and 500 GB Hard -Disk complete all as specified and directed.

Supply and installation of Digital Printer for printing the Recharge tokens complete all as specified and directed.

M&L for Sub main wiring 2x 6 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

M&L for Sub main wiring 2 x 10 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 10.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

S&F Polycarbonate Meter enclosure for enclosing Single phase smart meter all as specified and directed.

S&F Polycarbonate Meter enclosure for enclosing Three phase smart meter all as specified and directed.

Transaction/Vending chages inclusive of maintenance & service for one year.Note: MoU between MES and OEM through contractor for subsequent year transaction charges for at least 05 years would be submitted . First year charges should be same with subsequent year transaction charges w.r.t item no 34 & 35.

PURBANCHAL BUILDERS

M/S S.S.Corporation