FTH area development, stone paving and RCC drainage works

Excavation for drain and side wall Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

PCC Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

CENTERING AND SHUTTERING Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls,return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets,kerbs and steps etc.

RCC Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal sizet

reinforcement Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

filling Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

dismantiling Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

Sectioning including excavation work for paving stones area Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

Taking out existing stone paver Taking out existing Natural stone paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old stone paver Laying old natural stone paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand/aggregates,filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (natural stone paver blocks shall be supplied by the department free of cost.)

New stone paver work Providing and laying Natural stone paver blocks for in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, natural good quality stones dressed with suitable size and laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of stone paver into the sand /aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick natural stone 80mm thick paver block in 30cmx30cm size with approved color design and pattern

Steel work for Handrails Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and , including welding and bolted with special shaped washers etc. complete

Painting for handrails Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

steel work for drain- gratings Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Floor tile Providing and laying rectified Ceramic floor tiles of size 300x300 mm or larger (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) including pointing the joints with epoxy joint filler(2mm) of matching shades etc, complete.

Wall tile including skirting, risers etc Providing and fixing Ist quality ceramic wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with epoxy joint filler(2mm) of matching shade complete.

Disposal of rubbish materials Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Skilled labour for refixing steel work for existing two wheeler shed And Miscellaneous works 'Labour charges for Skilled Labour for steel fabrication work, other unforeseen skilled works, etc. if any .

Sooraj P (Sivani Associates)