CERTAIN MISC WORKS OF FOOTPATH, INTERLOCKING TILES, DRAINS FENCING ETC UNDER AGE B/R-I AT IMA DEHRADUN

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads and ermoving of existing old paint etc all as per manufacture instructions complete all as specified and directed.

Material and labour for preparation of old painted / decorated concrete surfaces/ PCC kerb stone/ plastred surfaces and applying one coat synthetic enamel paint , complete all specified and directed.

M&L for complete removal of existing treatment from concrete surfaces/ PCC kerb stone / plastred surfaces and applying two coat synthetic enamel paint over a one coat of primer , complete all specified and directed.

M & L, Precast Cement concrete 1:2:4 type B-1 in copings, roof kerbs or mud stops, rounded or chamfered on edges in parapets and railings, kneelers, apex stones, bed plates, kerb stone and the like including weathering, slightly rounded or chamfered angles and throating, set in CM 1:4 incl cement mortar and dismantling of damaged kerb stone and necessary earth work if reqoired as specified & directed .

M&L for two coats of synthtic enamel paint to concrete surface over a coat of primer incl preparation of new surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and direction.

Repair to potholes any depth and not exceeding 1 Sqm each incl sweeping ferrfrom dust nd mud or water scoring sunken surface of road cutting around edges and making good by Providing and supplying ready-made cold bituminous pothole patching mix, plant manufactured in accordance with IRC:116-2014, “Specifications for Readymade Bituminous Pothole Patching Mix Using Cut-Back Bitumen”, comprising clean, hard, durable and continuously graded crushed mineral aggregates uniformly coated with Medium Curing Cut-Back Bitumen MC-800 incl compection complete all as specified and direction.

S&F, in repairs, Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm height 20mm fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge by Solar in 8-10hours including removal of old unserviceable stud, complete all as directed.Make: Shakti, 3M, Tata BP solar, Dark eye.

S&F, in repairs, cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud, complete all as directed.

S&F, in repairs, high intensity grade shedding retro reflective delinator post 75 mm outer dia, heavy duty steel pipe 1.2 m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as specified embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) and up to 30 cm high above ground level including necessary form work, two coats of cement base paint on concrete base, removal of old unserviceable delinator complete all as specified and directed.

S&F in repair solar road delinator 6 LEDs of colour red/yellow housed in plastic body, LEDs,solar cells,battery and light sensorwell procted inside,polycarbonate sheet,device protected with powder coated wire mesh,cage , system mounted over 47mm dia steel tube ,powder coated of length 600mm having sheet foot for firm grip to ground. delinators to have additional reflective bands. system workable for 2-3 days(nights)after full chargr for 8-10 hours. cat part no. GPL-13-01of GREENLITE PVT LTD.