Karnataka

Active

Works

Bridges/Culverts

Construction Of Bridge at Ch 12.30 Km Of NH-4 to Hulluru Road Via Gowrammanahalli chikkalagatta Siddavvanahalli Hunasekatte Hireguntanuru MDR Road In Chitradurga Taluk(Near Kurubarahalli)

Public Works Department

PWD Division Office Chitradurga | CHITRADURGA, Karnataka

Amount: ₹2.0 CrCloses: 24 Aug 2026

Timeline

Published24 Jul 2026
Pre-Bid Meeting13 Aug 2026
Closes24 Aug 2026
Bid Opening25 Aug 2026

Tender Value

₹2.0 Cr

EMD Value

₹3.0 L

Closing Date

24 Aug 2026, 9:30 pm

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD CTA

Office Number

08194222446

Work Description

Construction Of Bridge at Ch 12.30 Km Of NH-4 to Hulluru Road Via Gowrammanahalli chikkalagatta Siddavvanahalli Hunasekatte Hireguntanuru MDR Road In Chitradurga Taluk(Near Kurubarahalli)

Tender Information

Tender ID

PWD/2026-27/BR/WORK_INDENT37512

Reference Number

PWD/2026-27/BR/WORK_INDENT37512

Tender Type

Open

Product Category

Bridges/Culverts

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredThe Tender should have a valid KPWD Registered Class-III and Above contractor.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 3.2 a achieved in at least two financial years a minimum financial turnover of Rs. 394.96 Lakhs, in all classes of Civil Engineering Construction works only Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

RequiredTo qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 3.2 b satisfactorily completed as prime contractor, at least one similar work such as Construction of Bridge work of value not less than Rs. 98.74 lakhs. Work done Certificate issued by competent Authority of rank not less than Executive Engineer

RequiredThe Tenderer should have executed in any one year in the last five years i.e.2021-22 to 2025-26 3.2 c the following minimum quantities of work 1. EWE / Embankment/ Subgrade - 2106.00 m3 2. PCC/RCC - 673.00 m3 3. TMT Steel - 96.00 t Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

RequiredEach tenderer should further demonstrate 3.3 b liquid assets and / or availability of Credit facilities of not less than Rs.59.24 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

RequiredEMD for Rs. 100000.00 shall be paid through KPPP and the Balance of Rs.196300.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. bidder should upload the scanned Copy of such original document issued by Nationalised/Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.

RequiredStatement 3.6 indicating the A Existing commitments and ongoing works, B Details of works for which tenders are already submitted. The statements should furnished as per statement 1.5 A,B of Section 3 of Qualification information in Standard Bid document.

RequiredName, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

RequiredGST Declaration Certificate

Eligibility Criteria

In the Sanctioned Estimate, the item rates are showing inclusive of all applicable taxes but it is to be noted that rates are exclusive of taxes (GST).

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2026-27 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

Tenders from Joint ventures are not acceptable.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The contractor shall submit the details of technical staff employed by him.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement (KPP) portal.

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Government orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts, labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Further particulars, if any queries required to the Contractor, they can get from the office of the concerned Executive Engineer, PWD Division, Chitradurga during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all necessary original documents mentioned in the bid document to the Executive engineer at the time of verification of documents during Technical Bid evaluation

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the bid documents and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1 Percent of the bill amount will be deducted towards constructions labour welfare fund.

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified on his own risk and cost.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

Work shall be carried out according to relevant IS/IRC codes specifications depending on type of work.

The bidder has to establish field laboratory at the work site as per GO No:PWD/243/SEV/2013 Bengaluru dated:22.07.2014.

The Defects Liability Period is 24 months (2 Years)

The contractor has to quote the same rate to the same items of work that is to be executed at different chainages. If in case, the contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 3.2(b)satisfactorily completed as prime contractor, at least one similar work such as Construction of Bridge work of value not less than Rs. 98.74 lakhs.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

The Tenderer should have executed in any one year (in the last five years i.e.2021-22 to 2025-26) 3.2 (c) the following minimum quantities of work 1. EWE / Embankment/ Subgrade - 2106.00 m3 2. PCC/RCC - 673.00 m3 3. TMT Steel - 96.00 t

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

Capabilities of Vendor

3.6 Statement indicating the (A) Existing commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.

Others -- details work listed in the Statement should be counter signed by the EE or Equivalent officer

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24 2024-25 & 2025-26 3.2(a) achieved in at least two financial years a minimum financial turnover of Rs. 394.96 Lakhs, (in all classes of Civil Engineering Construction works only)

Others -- Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Each tenderer should further demonstrate:3.3(b) liquid assets and / or availability of Credit facilities of not less than Rs.59.24 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

Others -- Bankers Certificate

EMD for Rs. 100000.00 shall be paid through KPPP and the Balance of Rs.196300.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. bidder should upload the scanned Copy of such original document issued by Nationalised/Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.

Others -- Scanned copy of E.M.D and Bank Guarantee

Others

Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

Others -- Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

GST Declaration Certificate

Others -- GST Declaration Certificate

The Tender should have a valid KPWD Registered Class-III and Above contractor.

Others -- Registration Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹4,940

EMD Fee Amount

₹3.0 L

Important Dates

Last Activity

24 Jul 2026

Published

24 Jul 2026

Bid Opening

25 Aug 2026

Download Ends

21 Aug 2026

Pre-Bid Meeting

13 Aug 2026

BOQ Preview

•

Construction Of Bridge at Ch 12.30 Km Of NH-4 to Hulluru Road Via Gowrammanahalli chikkalagatta Siddavvanahalli Hunasekatte Hireguntanuru MDR Road In Chitradurga Taluk(Near Kurubarahalli)

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Including cost and conveyance of all materials labour HOM of mach...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Asphaltic Plug Joint - Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100...

•

Filler joint - Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. Ref to MoRT&H : IRC - 2605 ...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Filler joint - Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight. Ref to MoRT&H : IRC - 2605 ...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- Including cost and conveyance of all materials labour HOM of machineries, equi...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- Including c...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- Including cost and conveyance of a...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fu...

•

Bridge Maintenance & Testing - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and eff...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of spec...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Chevron Boards - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:20...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Crash Barrier for Bridges - Provision of an Reinforced cement concrete crash barrier at the bridge deck & approaches to bridge structure, constructed withReinforced cement concrete with ...

•

Tar paper-Supplying, and fixing in postion Tarpaper for laying over abutment as Bearing conforming to MoSRT &H Specifications as 1per drawing and Technical Specifications, including cost of all materi...

•

Ready Mixed concrete (RMC) with cement & Cementitious materials providing

•

and laying in position ready mixed or Batch mixed concrete as per IS 10262 mix design

•

procedure for cement concrete works in...

•

Ready Mixed concrete (RMC) with cement & Cementitious materials providing

•

and laying in position ready mixed or Batch mixed concrete as per IS 10262 mix design

•

procedure for cement concrete works in...

•

Ready Mixed concrete (RMC) with cement & Cementitious materials providing and laying in position ready mixed or Batch mixed concrete as per IS 10262 mix design procedure for cement concrete works in a...

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for

•

culverts on first class bedding of g...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

37512 kw-4 bid.doc

Tender Document • 1.04 MB

GST Declaration.docx

Others - GST Declaration • 0.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].