Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.1 LAccepted-AOC 20 1 2024 | CENTRAL DELHI | DELHI | 110002 | ₹2.1 L | 1 | Accepted-AOC awarded |
| 2 | Rejected-Technical | - | - | Rejected-Technical rejected |
| Sl No | Description | Qty | Unit | Hamed K L1 | DIVINE CONSTRUCTION L2 |
|---|---|---|---|---|---|
| 1.00detailed estimate | |||||
| 1.00 | OD456504/2025-2026:Surface dressing of the ground including removing vegetation and in-equalities not exceeding
15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m | 57 | sqm | 34 ₹1,938 | 35 ₹1,995 |
| 1.00 | 75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 57 | sqm | 15 ₹855 | 20 ₹1,140 |
| 1.00 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65) | 57 | sqm | 278 ₹15,846 | 280 ₹15,960 |
| 1.00 | 2.9.C:Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202.(C) Extra over Items (A) and (B) for cutting rivets | 30 | each | 29.98 ₹899.40 | 30 ₹900 |
| 1.00 | 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material | 0.94 | cum | 3,124 ₹2,952.18 | 3,130 ₹2,957.85 |
| 1.01 | 75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification
(i) Nominal mix (1:2:4) | 2.83 | cum | 8,574 ₹24,307.29 | 8,580 ₹24,324.30 |
| 1.01 | OD456423/2025-2026:Tubular Steel Railing on Medium Weight Steel Channel (ISMC series) 100 mm x 50 mm
Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium
weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 m high above ground, 2 m centre-tocentre, complete as per approved drawings Clause 1706 (modified item code 10.14 mord) | 50 | metre | 3,277.82 ₹1.6 L | 3,280 ₹1.6 L |
Tender Value
₹2.1 L
EMD Value
₹5,269
Closing Date
11 Mar 2026, 11:00 amClosed
SHEELA P R
ASSISTANT ENGINEER LID EW SECTION CHEKKIAD GP
Annual Plan CHEKKIAD GP 2024 2025 PaAnnual Plan LSGD ANNUAL PLAN 2025 26 CHEKKIAD GP PR NO 123 Maintanance of Jathiyeri Peruvankara Palam Road IN WARD 9 General Civil Work 51 BASIC FACILITIES TO ANGANWADIS General Civil Work
2026_LSGD_842834_6
009/2025-26/AE/LIDEW/CKD
Open Tender
Civil Works - Roads
180 days
CHEKKIAD GRAMA PANCHAYATH
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹5,269
Yes
9 Apr 2026
3 Mar 2026
12 Mar 2026
3 Mar 2026
11 Mar 2026
3 Mar 2026
detailed estimate
OD456504/2025-2026:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
75.5.2.1pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65)
2.9.C:Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202.(C) Extra over Items (A) and (B) for cutting rivets
4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material
75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)
OD456423/2025-2026:Tubular Steel Railing on Medium Weight Steel Channel (ISMC series) 100 mm x 50 mm Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 m high above ground, 2 m centre-tocentre, complete as per approved drawings Clause 1706 (modified item code 10.14 mord)
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.36 MB
Tendernotice_2.pdf
PDF • 0.50 MB
Tendernotice_3.pdf
PDF • 0.28 MB
BOQ_1422494.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 1.72 MB
prelimiary.pdf
Tender Documents • 0.34 MB
affidavit.pdf
Tender Documents • 0.32 MB
fot.pdf
Tender Documents • 0.38 MB
Download all tender documents and submit your bid