CONSTRUCTION OF BUS DEPOT / WORKSHOP / TERMINAL FOR ELECTRIC BUSES AT T.P..45 (JAHANGIRPURA - PISAD), F.P. 125 (DISTRICT CENTER) IN WEST (RANDER) ZONE, SURAT (Work No.03)

NAME OF WORK :- CONSTRUCTION OF BUS DEPOT / WORKSHOP / TERMINAL FOR ELECTRIC

BUSES AT T.P..45 (JAHANGIRPURA - PISAD), F.P. 125 (DISTRICT CENTER) IN WEST (RANDER)

ZONE, SURAT. (Work no.03)

VOLUME-II : PRICE BID

SUB ESTIMATE 1 S.O.R 2024-2025 & MR.

(A) WORK UPTO PLINTH LEVEL

DTS NO Description

Qty. Rate per Amount

Excavation for foundation includ.sorting out & stacking of useful

1 1A ,B materials & disposing of the excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. With Machinaries

(A) loose or soft soil

( II ) 1.5 To 3.0 MT Depth 788.00 136.47 CM

(III) 3.0 To 5.0 MT Depth 263.00 149.65 CM

Providing Dry Rubble Soilling of various thicknessto required grade

2 120 including trimming of earth work hand packing the interstics with Quarry

Spalls complete for all leads and lifts.

(A) Foundation and plinth 313.00 1094.11 CM

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

3 90 disposal of the surplus excavated soil as directed within a lead of 50 M.

For following diameter of piles.

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded

4 88 stone agg. 40 mm nominal size) & curing comp. incl.cost of form work in

(A) Foundation and Plinth 79.00 2769.69 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

5 88C agg 20m.m Nominal size)&curing comp. incl. cost of form work in :

(A) Foundation and Plinth 126.00 3095.25 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) as

per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement.

(A) foundation, footing, base of columns and mass concrete 334.00 4332.50 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) as

per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement.

(1) Having cross sectional area upto

upto G.L./P.L. 0.00 12930.68 CM

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

upto G.L./P.L. 0.50 11253.32 CM

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 41.50 9288.03 CM

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0.00 9083.57 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

upto G.L./P.L. 0.00 8155.37 CM

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 70.00 7067.84 CM

upto Basement to G.L./P.L. 18.00 8336.43 CM

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

8 5,4 comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C.

Work in : Up to G.L./P.L. (A) COLUMNS:

(1) Having cross sectional area upto

upto G.L./P.L. 3.00 12844.32 C.M.

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

DTS NO Description

Qty. Rate per Amount

upto G.L./P.L. 0.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0.00 9201.68 C.M.

Providing and fixing TMT bars Fe-500 steel reinforcement for R.C.C.

work including binding, bending and placing in position as per design &

BBS of structural consultant etc. comp. Up to G.L./P.L.

Upto G.L./P.L. 69970.00 77.29 Kg.

Providing and constructing brick work using fly ash building bricks

having crushing strength not less than 35 kg/sqcm. in foundation and

plinth in cement mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 67.00 4441.11 CM

Filling in trenches with available excavated soil incl. Watering and

11 14 consolidating etc. comp inclu. Spreading the available soil as per 1427.00 136.92 CM

instruction of engineer in charge etc.complete.

Filling in foundation and plinth with yellow or selected soil in layer of

12 13 cm thickness including watering ramming and consolidationg etc.comp. 501.00 301.78 CM

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

13 19A cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical (two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge. all floor

upto G.L./P.L. 88.00 324.00 SM

Providing & Laying green polished kota stone slab flooring at all floor

levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand) laid

14 44 over&joined with grey cement slurry incl. Rubbing & polishing etc. comp.

(A) 25 mm. (Tolerance +/- 2mm) For all Floor

Ground Floor 5.00 1019.39 SM

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one

15 Self Expl . percent is recommended i.e. one litre 20 EC chemical emulsion with 19 835.00 87.03 SM

liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended

Total amount upto plinth

Total amount upto plinth

(B) WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

16 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

(1) Having cros sectional area upto 0.08 sq. mt

Ground Floor 0.00 12930.68 CM

First Floor 0.00 12971.23 CM

At Terrece Floor 0.00 13011.78 CM

(2) Having c/s area > 0.08 & upto 0.12 sq.mt.

Ground Floor 0.00 11253.32 CM

First Floor 0.00 11293.87 CM

At Terrece Floor 0.00 11334.42 CM

(3) Having cros sectional area> 0.12 sq.mt.

Ground Floor 38.00 9288.03 CM

First Floor 36.50 9328.58 CM

At Terrece Floor 14.50 9369.13 CM

(1) Having c/s area up to 0.08 sq. mt.

Ground Floor 0.00 9083.57 CM

First Floor 0.00 9124.12 CM

DTS NO Description

Qty. Rate per Amount

At Terrece Floor 5.00 9164.67 CM

(2) Having c/s area > 0.08 & upto 0.12 sq.mt.

Ground Floor 0.00 8155.37 CM

First Floor 0.00 8195.92 CM

At Terrece Floor 0.00 8236.47 CM

(3) Having cros sectional area> 0.12 sq.mt.

Ground Floor 51.00 7067.84 CM

First Floor 51.00 7108.39 CM

At Terrece Floor 5.00 7148.94 CM

(1) Slabs having > 8 Cm & upto 10 Cm th.

Ground Floor 0.00 7965.38 CM

First Floor 0.00 8005.93 CM

At Terrece Floor 0.00 8046.48 CM

(2) Slabs having > 10 Cm & upto 13 Cm th.

Ground Floor 0.00 7377.92 CM

First Floor 0.00 7418.47 CM

At Terrece Floor 0.00 7459.02 CM

(3) Slabs having more than 13 Cm thickness.

Ground Floor 88.00 6793.97 CM

First Floor 88.00 6834.52 CM

At Terrece Floor 7.00 6875.07 CM

D) R.C.C. PARDI

Ground Floor 2.00 8336.43 CM

First Floor 1.00 8376.98 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

17 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

(A) Staircases including landings etc.

Ground Floor 6.00 7765.80 CM

First Floor 6.00 7806.35 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

18 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

Ground Floor 6.00 9963.33 CM

First Floor 6.00 10003.88 CM

At Terrece Floor 1.00 10044.43 CM

Ground Floor 7.50 7119.46 CM

First Floor 7.50 7160.01 CM

At Terrece Floor 1.50 7200.56 CM

Providing and fixing TMT bars Fe-500 steel reinforcement for R.C.C.

19 7 work including binding, bending and placing in position as per design &

BBS of structural consultant etc. comp.

Ground Floor 31585.00 77.29 Kg

First Floor 31010.00 78.34 Kg

At Terrece Floor 7285.00 79.39 Kg

Providing & construction brick work using Fly Ash bricks having

20 8 crushing strength not less than 35 Kg./sq.cm. in foundation & plinth in

C.M. 1:6 (1 cement:6 sand ) etc. comp In charge.

Ground Floor 101.00 4729.83 CM

First Floor 127.00 5018.55 CM

At Terrece Floor 45.00 5307.27 CM

Providing & constructing Half brick masonary in Fly Ash bricks having

21 12 crushing strength not less than 35 kg/sq.cm in c.m 1:4 (1 cement: 4 sand)

curing etc complete.-

Ground Floor 142.00 712.81 SM

First Floor 122.00 719.37 SM

At Terrece Floor 22.00 725.94 SM

DTS NO Description

Qty. Rate per Amount

Providing and applying 10mm. thick cement plaster in single coat on

brick/concretewalls for plastering and finished even and smooth with a

floating coat of near cement slurry mixed with proportion etc. complete in

cement mortar 1:3 (1 cement : 3 sand )

(A) for wall and similar surfaces

Ground Floor 1224.00 199.28 SM

First Floor 1177.00 228.84 SM

At Terrece 211.00 258.39 SM

(B) Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor for ceilings and soffits of

Ground Floor 669.00 225.34 SM

First Floor 640.00 254.89 SM

At Terrece 43.00 284.45 SM

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

23 19A cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical (two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge. all floor

All Floor 1154.00 324.00 SM

Providing and fixing 150mm wide, approved quality chicken wire mesh

(FRP/ PVC)at junction of brick work and RCC work or two dissimilar

24 SELF EXP. surfaces, at all heights fixed by nails, rowal plug sortag by cement mortar

1:3 before applying the plaster, including curing, scaffolding all complete

All Floor 326.00 102.00 SM

25 20 Prov 35 mm wide throating of plaster drip etc.comp 200.00 43.74 RM

Providing and applying 20mm. thick cement plaster patta of c.m. 1:3 (

1cement : 3 sand ) etc. comp.

All Floors 80.00 50.00 RM

27 SELF EXP. Providing of 20mm deep finished groove etc.comp

All Floor 300.00 50.00 RM

Providing & laying granite slab 18mm thick in flooring, treads of steps

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

28 97A coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in

white or colour cement including rubbing and polishing complete. (Basic

Rate:- Rs.1347.46/S.M.)

All Floor 480.00 2410.00 SM

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

29 97B Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

All Floor 150.00 2449.00 SM

Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

30 97C with nessary adhesive material and finished with flush pointing in white

or colour cement, including rubbing & polishing comp.. (Basic Rate:-

All Floor 314.00 2026.00 SM

(C ) Labour Charges For Edge Finished For Granite 1668.00 43.43 RM

Providing & Laying green polished kota stone slab flooring at all floor

levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand) laid

over&joined with grey cement slurry incl. Rubbing & polishing etc.

comp.(A) 25 mm. (Tolerance +/- 2mm) For all Floor

All Floor 3.00 1019.39 SM

Providing & Laying polished kota stone of machine cut edge slab 25 mm.

th. in riser of steps, tread, dedo & pillars center piece not less than

32 45 mt.in width &side pieces of equal size as per design, laid on 10 mm.th.

C.M.1:3(1 cement:3 sand)joined & polishing etc. For all Floor

DTS NO Description

Qty. Rate per Amount

All Floor 43.00 1130.79 SM

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads ofsteps & Landing laid on bed of 20 mm (Average) base of

cement mortar1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on

33 47B existingflooring by adhesive material including dismentaling of existing 171.00 1467.72 SM

flooringand jointed with colour cement slurry including finished with

flush pointing& cleaning the surface etc. comp.Size 24" x 24" (Basic Rate-

Rs.485.0/S.M.)or Antiskid tiles Tiles size and make as per

architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

3coarse sand) and jointed with white cement slurry. Tiles size and make

as per architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"/24" X 48"

in flooring treads of steps and landing laid on a bed of 12mm thick cement

35 47D mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in 428.00 1531.82 SM

white cement. Tiles size and make as per architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"/24" X 48"

in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1

36 47D cement : 3 coarse sand) and jointed with white cement slurry. Tiles size 26.00 1592.40 SM

and make as per architect/consultant selection.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate

shall be as per approved shade & texture, of make incl. Heavy S.S. Hinges

with nessary screws & Anodized aluminum fixtures & fastenings For all

For all Floor 62.00 3720.00 SM

Providing and fixing 35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frmae is to be filed up

with injected polyurethene foam done in situ along with embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole

38 95A FRP shutter is to be water proof weather proof,termite proof &resistance 64.00 2019.98 SM

to mild acid/alkali. Rates are to be inclusive of S.S.hinges with fastener

sleeve & alluminium fixtures & fastentings. Product should have 3 years

performance guarantee and company have ISO 9001-2000 certificate.

Providing and fixing make : veka , Three Track Sliding Door UPVC

Window (2 Shutters + 1 Mosquito Net Shutter) 3 T / 2 S Glass &

Shutter Net SL Window Profile I-60 Sliding,Glass 5mm Clear Reflactive

Glass,900 Reinforcement As per Requirement Frame Laminated Profile

Slider O/F 3 Track Frame ( 108 x 45 ),Slider Win. Sash 58 mm ( 39 x

),Bead Type Default

39 98D Viewed From Inside Mosquito Net Fiber Mesh

Lock Type & Coloure Touch Lock Black

SL Roller Single Roller Bearing,Wind Pressure 100, With Epdm Rubber

Gasket, Air Lock Strip And Finishing Joints With Silicon Sealant, With

Powder Coated Standard Aluminium Fittings.To Add Mosquito Net

Shutter For All Windows Of Rooms.

(A) Same as above but Colour anodized 80.00 8764.00 SM

DTS NO Description

Qty. Rate per Amount

Providing and fixing make : veka , Four Track Sliding Door UPVC

(3 Shutters + 1 Mosquito Net Shutter) 4 T / 3 S Glass & 1 Shutter Net SL

Window Profile I-60 Sliding

Glass 5mm Clear Reflactive Glass,900 Reinforcement As per

Requirement Frame Laminated Profile

Slider O/F 4 Track Frame ( 156 x 45 )

Slider Win. Sash 58 mm ( 39 x 58 )

40 98E Viewed From Inside Bead Type Default Mosquito Net Fiber Mesh Lock

Type & Coloure Touch Lock Black

SL Roller Single Roller Bearing

, With Epdm Rubber Gasket, Air Lock Strip And Finishing Joints With

Silicon Sealant, With Powder Coated Standard Aluminium Fittings.To

Add Mosquito Net Shutter For All Windows Of Rooms.

(A) Same as above but Colour anodized 7.00 9520.00 SM

Providing And Fixing Standard Extruded Of Aluminium Section Of Size

100 x 50 mm Std Allu. Box Frame Standard Extruded Colour Anodized

41 98C Aluminium Frame With 6Mm Thick Transparent Tinted Float Glass Of

Standard Make, for Fixs Glazzing with 150 to 230 mm glass Whole.

Providing And Fixing make : veka ,Ventilation,Profile I-60

Casement,5mm Glass Bajri Glass, 750 Reinforcement Full

Frame Laminated Profile

42 98B Compa Case Fra 60 x 55 mm

Viewed From Inside Mullion 60 x 74 mm Bead Type Default

, With Exhaust Fan. for Ventilation.

(A) Same as above but Colour anodized 27.00 6722.00 SM

Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

43 34A frame around square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red lead paint

(A) Plain grill For all Floors 2705.00 109.41 Kg.

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

44 86 with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

All Floor 11.00 6158.35 S.M

Applying Priming coat over new steel and other metal surface after over

and including preparing the surface by throughly cleaning oil, grease dirt

and other foreign matter and scoured with brushed fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

45 35 lead. Providing & applying painting two coats at all floor levels on new

steel other metal surface with synthetic enemal paint, brushing interior to

give an even shade incl. cleaning the surface of all dirt, dust & other

foreign matter etc. Comp.

(A) For plain grill For all Floor 473.00 105.31 SM

Apply two coats of Birla or Asian acrylic lappy (putty) and two coats of

primer of approved brand and manufacture on new wall surface to give an

46 35B even shade including thoroughly brushing thr surface free from mortar

dropping and other matter and sand papered smooth.

All Floor 3969.00 40.59 SM

Wall painting with two coats of Acrylic emulsion plastic paint of

approved brand over existing surface to give an even shade & surface free

from mortar dropping & other foreign matter & sand papered smooth etc.

(A) for wall and similar surfaces

All Floor 2612.00 83.36 SM

(B) for ceiling

DTS NO Description

Qty. Rate per Amount

All Floor 693.00 35.41 SM

Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by

the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a

wire/ stiff coir brush, followed by water jetting if required. Fill up all

48 93A minor cracks and defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly using

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

All Floor 478.905 82.00 S.M

49 Providing and applying textured plaster as per design of Berger Ruff N

turf, ICI Dulux or of Asian paint as per manufacturers specification and

directions in shade and colour approved by architects, on exterior surfaces

SELF EXP. of the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and manufacturers.

All Floor 480.00 538.00 S.M

50 Supply and installation of Exatech FVH Porcelain Extruded Panels for

Ventilated Facade of size 1200x600x20±2mm Colour MC Land, MC

Gris, MC Opal having a weight of 31.68 kg/m2 in a horizontal/vetical

direction on the building facade having water absorption of <0.5% as per

ISO 10545 and the breaking strength >6000N. The panels has to have

class 5 stain resistant property.The Exatech extruded panels should

comply to Certificate of compliance with the requirements of ISO 9001:

2015 Quality management systems No.ES09 / 6403, Certificate of

121 compliance with the requirements of ISO 14001: 2015 Environmental

management systems No. ES03 / 0644 / MA, Certificate of compliance

with the requirements of ISO 45001:2018 Occupational Health and Safety

management systems.No. ES20 / 87764. Certificate of the EXA |TECH|

ceramic panel of reaction to fire classification according to EN 13501-1:

2019 and reaction to fire according to ASTM D1929-16.

DTS NO Description

Qty. Rate per Amount

Exatech Facade Panels to be installed using ventilated rainscreen

principle, with provision for natural ventilation of the space between the

facade tile and the structural wall of 30mm-100mm.The panels should be

fixed to a supporting aluminium framework consisting of vertical T

section measuring 100x60x2mm spaced at 1200mm c/c intervals. The

retention bracket should be measuring 50x60x3mm and the holding

bracket should be measuring at 120x50x3mm at corners and C clamps

measuring 56x21mm fixed on top of the vertical sections. The vertical

T/L sections shall be fixed to the wall using Klimas anchor fasteners for

MS framework/brickwork/RCC as applicable, spaced at maximum

1100mm c/c vertically(actual spacing to be based on the structural/static

calculation). The brackets shall be fixed to the vertical aluminium T/L

profile using two stainless steel self tapping hexagonal head screws of

dimensions 5.5x22mm. Horizontal aluminium C clamps measuring

56x21x2.5mm shall be fixed on top of the vertical aluminium T/L sections

from front using stainless steel self tapping counter sunk screws of

dimensions 4.2x14-16mm at maximum 1200mm c/c intervals horizontally

and at maximum 400/600 c/c intervals vertically matching to the grid. The

tiles shall be mounted on the clips such that the tiles are supported at the

top and bottom. The vertcal joint between adjacent tiles to be 6mm open

groove. inculding M.S. scaffolding free from wall

All Floor SQ.FT

Providing and Fixing Hollow steel Sections Framed Work including

Hoisting, Welding Fixing in position Purlin, Main

Chordetc.asperEngineer

in-charge.TATA / JINDAL / ASIAN Make,Steel work welded in built up

51 99 sections, framed work including cutting, hoisting, fixing in position and 18265.00 126.00 KG

applying a priming coat of red lead paint (A) in beams & joists channels

angles, tees, flats with connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers & the

like.Making M.s. Ladder , M.s. Gate , M.s. Railling etc

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished

JorLHooks,Boltsandnuts8mdiameterwithbitumenandG.I. limpetwasher

orG.I. limpetwasher. filledwithwhite leadcompleteexcluding thecost of

52 118 purlins, Rafters and Trusses. (1) 0.63mm thick sheet. (Tata / Jindal or 211.00 1016.00 SMT

Providing and constructing sandwitch type Polish Kota Stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish

Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota stone

patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

53 self expl. 10mm th. plaster in 1:3 with finishing smooth with cement slurry as 4.00 3128.00 RMT

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors.

Providing and filling Epoxy grout of approved or suggested brand by

54 self expl. consultant / Engineer incharge in 4mmto6mmthick tiles joint including 800.00 40.00 RMT

spacer with cleaning of joint by vacuum or blower etc

Providing and fixing the S.S. Tubular/Angles/Flats 304 as per the given

Arch's design and engineer-in-charge. Rate to include welding, lifting,

55 116 placing, electric rods etc. complete welding rods to be used as per the 240.00 450.00 KG.

Indian Standards. (as per approval of architect's specification ,selection &

Extra for additional height of proping 4.0 m beetween supporting

tempropery brick or stone pillors for supoorting as required (R&B SOR

24-25, CH-9, P. No 97,),as per architect instructions and suggestion.

DTS NO Description

Qty. Rate per Amount

(i) Height more than 4.0m and up to 5.0 m 0.00 407.75 SM

(ii) Height more than 5.0m and up to 6.0 m 0.00 714.85 SM

(iii) Height more than 6.0m and up to 7.0 m 0.00 607.98 SM

(iii) Height more than 7.0m and up to 8.0 m 300.00 915.08 SM

Total amount above plinth

Total amount above plinth

(C) WATER SUPPLY AND SANITARY ITEMS

Providing and fixing Wash Down Water closet European type W.C. pan

with integral P or S trap with normal closing seat cover L bend including

57 53b jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (A) Viterous china pattern - I low pressure type , as per architect

Make- Cera, Parry ware, HindWare- 350 x 500 x 390 mm 18.00 1356.81 No

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

58 53a water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera, Parry ware, Jaquar ,HindWare 8.00 1471.41 No

Providing & fixing Wash Hung basin with single hole for pillar tap , Size-

550 x 400 x 200 mm at all floor levels, with C.I. or M.S. Brackets painted

59 54 white incl. cutting holes & making good the same etc. complete. For all

Floor Make- Cera, Parry ware, Jaquar , as per architect instructions.

All floor 19.00 2132.94 No

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

wooden plugs with C.P.brass screws and washers etc. For all Floor , as per

architect instructions.

All floor 19.00 859.41 No

Providing & Fixing PVC Nanhi trap 31/2" ht.of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make at all floor levels of self cleaning design with

61 56 screwed down or hinged grating incl. cost of cutting making good the

walls & floors etc. For all Floor, as per architect instructions.

All floor 45.00 586.27 No

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type

"B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe

etc. jointed with resin of approved brand & manufacture etc. comp.

(M.R.) , as per architect instructions.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size (inside)

63 57 includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 100mm x 300mm Size -P type , as per architect

(B) 150mm x 100mm Size- P Type 6.00 1246.92 No

Providing and fixing 10cm. x15 cm.(4" x 6") S.W. trap with 0.45 x

mts. clear opening sewer trap chamber with 23cm. th. brick masonary

walls in c.m. 1:8 with cement plaster 12mm. thick in c.m. 1:4 inside and

outside to exposed faces bedding concrete 1: 5:10 and fixing C.I. cover

Kg on top etc. comp. ,as per architect instructions.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

65 59 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing

C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe , as per architect

Same As Above But Precast RCC Heavy Duty Cover Isstead of C.I. Cover

DTS NO Description

Qty. Rate per Amount

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 6.00 242.39 No

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M

66 60 1:1 of following nominal internal diameters incl. Testing of pipes and

joints etc. Comp , as per architect instructions.

Providing and laying in trenches galvanised mild steel tubes (medium

67 61 grade) of the following nominal bore and tube fittings etc. complete. , as

per architect instructions.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at

68 84A every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. , as per architect

85A Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fitting and clamps

69 including making good the wall, ceiling and floor etc. complete. (R&B

SOR 24-25,CH -23 PG 161) , as per architect instructions.

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete.low pressure

type Make- Cera, Parry ware, Jaquar ,HindWare , as per architect

All floor 12.00 1526.42 No

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe. low pressure type Make - Cera, Parry

ware, Jaquar ,HindWare , as per architect instructions.

All floor 12.00 1009.90 No

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

72 63 polished bright etc. comp.Make- Cera, Parry ware, HindWare , as per

architect instructions.

All floor 20.00 1353.77 No

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera, Parry ware, HindWare

All floor 19.00 1457.97 No

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass flange

74 63b complete, low pressure type including cutting and making good the wall

where required. , as per architect instructions.

Make- Cera, Parry ware, HindWare

All floor 39.00 1564.36 No

Providing and Fixing of PVC Stop Coc/valve for UPVC line at all floor

75 Self Exp. level as directed by Engr.Incharge, etc. complete. , as per architect

DTS NO Description

Qty. Rate per Amount

Providing flush cock consisting lever, cartridge sleeve & flange &

76 65 concealed part Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 26.00 2056.47 No

Providing and fixing Towel Ring 300 mm long fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall flange at

77 Self Exp. end of bars with heavy duty anchor fasteners & accessories. Make- Cera,

Parry ware, Jaquar ,HindWare , as per architect instructions.

All floor 12.00 924.24 No

Providing & fixing S.S.towel rail of 600 mm long approved make

including, providing & fixing C.P. brass screws, making holes in walls &

making good. Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 12.00 1100.42 No

Providing & Fixing stainless steel recessed type Soap dish of approved

make. Including providing & fixing screws, washers, cutting & making

good the walls.Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 18.00 839.91 No

Providing & fixing white vitreous china Urinal as per IS-2556 (Part-2 )

with C.I. hangers and 15mm dia. C.P. spreader,32mm diaWaste Coupling

Full thread ,130 mm Height ,Sprinkler with Pipe and pipe to wall with

80 Self Exp. C.P. flange complete including cutting and making good the walls and

floors wherever required. low pressure type Make- Cera, Parry ware,

Jaquar ,HindWare , as per architect instructions.

All floor 12.00 2535.70 No

Providing and fixing abonite ball cock of approved quality as directed etc.

comp.,as per architect instructions.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all

82 91 floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) , as per architect

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length

etc.,as per architect instructions.

All floors level 6.00 101.91 No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I.

S.C.I or PVC pipes including the cost of cutting holes & making good the

wall etc. Complete - 100 mm. dia. (M.R.),as per architect instructions.

(D) 150 mm to 200mm Dia. 50.00 98.00 No

Providing & Fixing in position PVC Cowl vent to pipes of

85 74 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.,as per architect

DTS NO Description

Qty. Rate per Amount

Providing and laying ordinary C.C. 1:1.5:3 mix for R.C.C. work including

boxing centering,vibrating, curing and mixed with approved water

proofing cement compound or "CEMWET" or "PIDICRETE LW"

intergral water proofing addmixture as water proofing agent to be mixed

with 50 kgs. cement bags shall be as recommended by the manifacture of

the water proofing material, concrete work for top, bottom slab and side

pardi for underground tank and item inclusive necessary excavation and

refilling the available earth, 15 cm th C.C. 1:4:8 for bedding conc., half

B.M. in C.M. 1:4 outside wall, inside pardi as per design, 10 mm th water

proffing cement plaster in C.M. 1:3 with smooth finishing, watering etc.

86 76 comp. to all inner face of tank curing etc. comp. incl. PVC steps, outlet

inlet, over flow and wash out pipe arrangment as necessary with

M.S.Cover of 25 Kgs. with locking arrangement fixing glazed tiles of

approved make such as Orient, Kajaria, Jhonson,Nitco,Somani ,Bell or

equivalent make of commercial quality of approved colour and size to

sides and bottom of water tankexcluding free board of 20 cm etc. as per

structural drawing excl. steel and as directed by Engr. in charge.,as per

architect instructions.

Under Ground water Tank 80000.00 6.87 Lit

Providing erecting and fixing double coated Syntex/Super/Reno PVC

(ISI) mark water tank of required capacity each with all necessary fittings

& connection etc. complete on terrace.,as per architect instructions.

Providing and fixing C.I. Manhole cover 0.60m.x0.45m. Size having

weight not less than 35 kg.,as per architect instructions.

Providing and filling in depressions of Bath and W.C. At all floor levels,

after completing plumbing work of pans, pipes,traps etc.with cinder or fly

ash as directed by Engineer in charge etc. comp. as per architect

(1) The whole work is to be executed through specialised agency with a

90 89a,b guarntee of 10 years given no a prescribed proforma duly stamped

(2) the rate shall niclude for work at all floors and conducting water proof

test as directed.

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of the

depression & about 18mm th' On the side walls of the depression up to the

floor level, water proofing plaster about 18 mm. th' be continued on the

walls above the floor level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge ,as per architect

DTS NO Description

Qty. Rate per Amount

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm th.

in C.M. 1:4 added with special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false chequered marking

of 300 mm.size.The treatment is carried along the vertical surface of the

parapet & other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to

be down in order and as directed and specified by the engineer-in-charge.

With average thickness of 120 mm and minimum thickness at khurra as 676.00 511.00 SM

65 mm. ,as per architect instructions.

Self Expl Providing and laying broken chine mosaic flooring for terrace using

12mm to 20 mm broken pieces of glaze tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar crème out upto

91 surface using white cement including rounding off junctions them upto 15 676.00 779.70 SM

cm along the wall, clearing with water and oxalic acid etc. as directed.

(SMC SOR( 131) , as per architect instructions.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria,Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring,

treadsof steps & landings laid on a bed of 12 mm. Av.

92 46 Th.C.M.1:3(1cement :3sand) finished with flush pointing in white cement 49.00 900.29 SM

etc.com. For all floors (Basic Rate:- Rs.285.0/S.M.)

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria,Jhonson,Nitco,Somani,Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including

93 47 necessary cement paste for fixing and joined with white cement slurry 72.00 932.02 SM

etc.complete. For all floors (Basic Rate:- Rs.285.0/S.M.)

A) Fabricating, moulding, supplying and fixing in position stainless steel

flats, weldmesh, perforated metal sheet, plates, brackets, etc for seat,

ticket counter and dustbin, satin finish of 304 L M grade as per detailed

drawing and design including argon welding, perforating, grinding,

cutting, moulding, casting, bending and profile laser cutting. cleaning and

buffing complete with all accessaries and hardware including screws,

bolts, rivets, washers, hinges, pivots, locks, handles, anchor fasteners,

94 Self Expl PVC Bushing etc complete. All S.S. material to undergo spectro analysis 30.00 450.00 kg

confirming to 304 grade. (Only actual finished measurements excluding

wastage will be paid for). Steel to be used has to be non-magnetic. Satin

finish sample to be approved by the consultant. All grinding and polishing

to be done with uni-directional finishes where polishing must be carried

out in the direction of pattern of the rest of the satin finish surfaces.

B) Do as 7.02 but extra for Water jet / laser profile cutting as per desired

lettering and logo as per designs.

Providing, Supplying, Fixing & Finishing of Cloth banner with size less

95 Self Expl 16.00 23.60 Sq.Ft.

than 8' x 4'.140 GSM

Providing, Supplying, Fixing & Finishing of Flex banner with MS (Mild

96 Self Expl 48.00 53.10 Sq.Ft.

Steel) framing for any size 240gsm pipe size 25 x25x1.5mm)

DTS NO Description

Qty. Rate per Amount

Providing, Supplying, Fixing & Finishing of Eco Vinyl with Lamination

97 Self Expl 15.00 55.46 Sq.Ft.

on PVC sheet. (2) 5 mm Sinages.

Supply and fixing of approved make PU tactile indicators tiles (item code

ET-ITT010 & item code ET-ITT009) of approved quality and make with

98 Self Expl 100.00 500.00 Sq.Ft.

builtyl fix with adhesive tiles size 300 x 300 mm , as per site situation and

direction by EIC.

Paiting lines,dashes,arrows,letters etc on roads,air-fields and link in two

coats with road marking / PU paints,brushing including cleaning the

99 Self Expl 40.00 110.00 R.ft.

surface of all durt,dust and other foreign matter(ii) over 10 to 20 cm in

Providing and fixing Grab Bars (for physically challenged persons) of

Stainless Steel, 32mm dia, 18(G) 1.2mm wall thickness, brushed finish,

ASIS 304 Grade of following sizes of standars make with necessary with

necessary fixture & fastenings of S .S.-304 grade, load carrying capacity

100 Self Expl of 130Kg, etc complete of standard make like CERA,EURONICS etc

asper the instructions of Engineer in -charge.

A) Grab Bar 600(L)x150(D) to be fixed with wall 2.00 2500.00 Set

B) Corner 90 degree bend 600(L) x 600.(L) x150(D) to be fixed with wall

C) U shaped wall mounted hand rail with hinge 600(L)x100(D) 2.00 7350.00 Set

Providing and fixing Required E Staimless steel plate of 1.0mm thickness

with regular printed signage at top in black colour at top part of plate and

respective brialle lipi sgnages at bottom part the plate, S.S. Plate to be

fixed on 10mm thick clear acrylic sheet, this whole assembly to be fixed 8.00 645.00 Sq.Ft.

on wall with four numbers of SS studs etc complete as per instructions of

engineer in-charge.

Providing and fixing 0.4mm thick Stainless steel plate of with embosing

the braille lipi signages on the top rail of the hand rail fixed on

102 Self Expl ramp.(Size - 9" x 4"). etc complete as per instructions of engineer in- 4.00 450.00 Each

SITC CCS 2200 AHUJA brand Counter Communication System on

103 Self Expl controll inquiry room.etc complete as per instructions of engineer in- 1.00 12500.00 Each

104 Self Expl providing and fixing modular indicating call bell 1.00 366.00 Each

providing & supplying approval quality of heavy duty wheel chair with

105 Self Expl standard specification with seat belt and hand brack etc. comp 1.00 13570.00 Each

Supplying and fixing Board &Sinages with 3mm thick exterior grade

ACP of Aludecore,Alstrong or Eurobond brand with Vinyl letters

Reflective] including propore M.S.Structure of 45x45mm Hollow square

box section of 20guage with one coat of Anticorrossive paint and two coat

106 Self Expl of oil paint with required anchoring fastners etc .complete as per 5.00 2654.00 SMT.

directed.(ACP Board back ground indigo blue and front yellow colour

with 72 mm size of letter)

Total amount of Plumbing & Sanitation & handicap Items

Total amount of Plumbing & Sanitation & handicap Items

Electrification Work of DEPOT Buildings

Electrification Specification As per electrical DTS and Item Specifications

DTS NO DESCRIPTION

SR. UNIT RATE AMOUNT

NO. INCL. CC INCL.CC

A POINT WIRING AND ACCESSORIES

R&B SOR Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

2025-26 (Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated

Item no.1-2- multi strand copper wires up to 10 mtr length , in below type of pipe

1 erected with 6A Modular type switch / bell push & accessories and earth

1 continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

DTS NO Description

Qty. Rate per Amount

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth

2025-26 wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

Item no.1-1- ZHFR/HRFR PVC insulated multi strand copper wires, in below type of

4 pipe to be erected complete with earth continuity and necessary

2 connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet

for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below type of

2025-26 pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of

3 following type erected on PVC / Metallic/Wooden box, single mounting

Item no.1-2- base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires erected in below

2025-26 type of pipe with 6A Modular type switches and following type of

4 accessories erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected

Item no.1-2- on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

2025-26 complete with Modular type switch & 5 pin Plug erected on PVC /

5 Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

Item no.1-2- accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

6 frame covered with textured / metallic/white front plate modules erected 25.00 257.55 Point

Item no.1-2- on / in wall / ceiling with following type accessories CAT-III

DTS NO Description

Qty. Rate per Amount

R&B SOR Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

2025-26 complete with Modular type switch & 5 pin Plug erected on PVC /

7 Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

Item no.1-2- accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC

insulated ISI marked stranded Copper conductor wire in following type of

2025-26 pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

8 copper conductor FRLS PVC insulated stranded wire of green colour for

Item no.1-4- earth continuity of following size (A) With medium class Rigid PVC pipe

and accessories

R&B SOR providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC

insulated ISI marked stranded Copper conductor wire in following type of

2025-26 pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

9 FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 100.00 112.11 Rmt

R&B SOR Supplying and erecting Flexible PVC insulated multi strand multi core

2025-26 kv grade ISI marked copper wires of following size to be erected as

Item no.1-4- directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 400.00 46.46 Rmt

R&B SOR Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with necessary

11 connections as directed

Item no.1-6- 1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

2 (b) 3 nos. 6A 5 pin Plug

For modular accessories CAT-III 8.00 1133.22 Nos

R&B SOR Supplying & erecting Electronic Type Cordless Call Bell erected on

2025-26 PVC/Metal board having portable bell push working on D.C. & bell on

Item no.1-6- 230V A.C. supply with cells / battery

R&B SOR Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)

having double-locking arrangement with grooves, trunking of size not

13 below 12.5 mm in height as per IS with accessories of PVC/Resin

Item no.1-3- polypropylene not below 1.8 mm thick duly sealed in joint & erected on

5 wall / ceiling of following size .

R&B SOR Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

14 necessary PVC fittings & Junction boxes fixed with adhesive solution &

Item no.1-3- Clamps with following dia of pipes, in approved manner as directed

B LIGHT AND FAN FIXTURES

DTS NO Description

Qty. Rate per Amount

M.R. Supplying and erecting LED Batten aluminium extruded /Polycarbonate

with polycarbonate diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

15 CCT 4000 K to 6500K, Uniformity ratio >0.7, 218.00 450.00 Nos

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 % Lumen Range: 2100-2300 Lumens

M.R. Supplying and erecting LED Batten aluminium extruded / Polycarbonate

with polycarbonate diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

16 CCT 4000 K to 6500K, Uniformity ratio >0.7, 20.00 980.00 Nos

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 % Lumen Range: 3700-4000 Lumens

R&B SOR Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

17 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

Item no.2-15- lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

2 suitable LAMP holder

17.1 (ii) 5 to 8 watts CAT-II 10.00 80.80 Nos

17.2 (iii) 10 to 15 watts CAT-II 21.00 124.23 Nos

R&B SOR Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

2025-26 corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

18 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Item no.2-15- Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with all accessories complete. IP20

& > 3600 Lumens

(vi) 36 watts, 24" x 24", Surge- 2KV CAT-III 0.00 1794.77 Nos

mr. SETC of Powder Coated outdoor LED square / round Drum Light, 2000-

2500 Lumens, > 10 CM long

R&B SOR Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

2025-26 die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

20 with toughened glass with company mark/name engraved or embossed

Item no.2-16- 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(iI) 48 TO 60 watts CAT-III 0.00 5599.44 Nos

(iv) above 90 to 120 watts 0.00 7266.95 Nos

(vi)above 160 to 200 watts 0.00 9647.52 Nos

M.R. Providing & fixing of Twin Beam Halogen-LED emergency light cum

entry /exit light, 220V-240Volt AC, Li-Ion Battery with back up of 2-3

Hours, wall mounted, Powder coated MS sheet housing, Sign font size:

22 Inch, with necessary low/ over voltage, SC and battery overcharge cut off 0.00 2250.00 Set

protection, with minimum 2 nos of 4 watt LED Halogen Lights mounted

R&B SOR Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep

23 complete having 3 blades aluminium body and blade sets having 77.00 2311.89 Nos

Item no.5-1- ornamental design shanks , canopy erected with earthing. [ Make shall be

3 approved by Engineer in Charge]

R&B SOR Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in

2025-26 RCC slab with Making the site as original.

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

2025-26 Fan box.

R&B SOR Supplying & erecting approved make low noise decorative exhaust fan

2025-26 having square frame ABS body with inbuilt lowers & square frame.

Item no.5-3- 250mm with 1350 RPM Cat.II

R&B SOR Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cy/s.

2025-26 400 mm sweep oscillating, type and adjustable, height complete with

Item no.5-5- guard regulator, & standard lead flexible wires and plug top. CAT-III

C Electrical Distribution

M.R. Wall / Floor mounted front operated electrical panel made up from 2 mm

thick powder coated sheet steel with 7 tank process with following

configurations: (1) Incomer: 200 A, 4P MCCB with protections (2)

28 Digital Ammeter and Voltmeter with selector switch (3) Outgoing: 63 A 1.00 125000.00 Nos

4P, MCCB - 3 Nos with indicators and with analog metering

devices,including of Design panel.

R&B SOR Providing and erecting busbar chamber confirming to IS-375 fabricated

from 16 G.M.S. sheet, dust & vermin proof having hinged door with

rubber gasket and necessary busbar supports with COPPER busbar having

2025-26 current density not more than 1.6 Amp. / sq.mm (Rated current / cross

29 section area) duly wrapped with colour insulation tape for phase

sequence, three phase & neutral each suitable for following current

Item no.3-7- capacity with necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity 3.00 2602.77 Rmt

(B) Suitable for 200 Amp. Capacity 3.00 3061.31 Rmt

R&B SOR Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse

Unit Cubical type for panel mounting complete with operating mechanism

30 suitable to operate on 415V A.C. With HRC fuses of suitable load

Item no.3-3- confirming to IS. 13947 (Part I & III). of following capacities

R&B SOR Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth bar

2025-26 and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB

31 to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing sheet

steel double door (IP-43)

(ii)6 way 1.00 885.77 Nos

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) sheet steel double door (IP-43)

(ii)6 way 2.00 2913.85 Nos

(iii)8 way 2.00 3412.79 Nos

R&B SOR providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

2025-26 10 KA and suitable for operation on single phase 240 V,50Hz. having

33 characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

(i) 25 Amps. DP CAT-III 1.00 1969.50 Nos

R&B SOR Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

2025-26 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz.

34 having characteristic of quick action & tripping with all advance feature

& do not incorporate any electronic component for following Max. rating

2 erected as directed.

(II) 40 Amps. 4P CAT-III 2.00 2637.11 Nos

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing & erecting 240 V MCB double pole switch for lighting Load (B

2025-26 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

Item no.3-10- existing box having following capacity

(A) 6 to 32 Amp. CAT-III 2.00 278.76 Nos

R&B SOR Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

2025-26 curve) having 10KA breaking capacity & confirms to IS :8828 in existing

Item no.3-10- box having following capacity

(A) 40 Amp. CAT-III 2.00 638.32 Nos

R&B SOR Providing & erecting 240 V MCB double pole switch for motor &

2025-26 inductive load (C Curve) having 10 KA breaking capacity & confirms to

Item no.3-10- IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. CAT-III 1.00 299.97 Nos

R&B SOR Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

2025-26 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

Item no.3-10- existing box having following capacity

(A) 6 to 32 Amp. CAT-III 1.00 595.90 Nos

R&B SOR Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

2025-26 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

Item no.3-10- existing box having following capacity

(c)63 Amp. CAT-III 1.00 737.30 Nos

R&B SOR providing and erecting Miniature circuit breaker single pole 0.5A to 2A

2025-26 system and having breaking capacity 10 KA to be erected in existing box.

Item no.3-10- confirming to IS 8828/1996 with ISI Mark

R&B SOR providing and erecting Miniature circuit breaker single pole 6A to 25A

2025-26 suitable to operate on 240 V A.C. system and having breaking capacity

Item no.3-10- KA to be erected in existing box. confirming to IS 8828/1996 with ISI

1 (B) Mark CAT-III

D CABLE AND END TERMINATION

R&B SOR Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

2025-26 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Item no.4-3- necessary clamps or in existing trench / pipe of following size of cables.

(c) 3 core 6 Sq. mm 20.00 107.06 Rmt

(D) 3 core 10 Sq. mm 50.00 131.30 Rmt

(E) 3 core 16 Sq. mm 50.00 143.42 Rmt

(F) 3 core 25 Sq. mm 50.00 162.61 Rmt

R&B SOR Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

2025-26 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Item no.4-3- necessary clamps or in existing trench / pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 100.00 183.82 Rmt

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 20.00 220.18 Rmt

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 300.00 284.82 Rmt

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 10.00 378.75 Rmt

R&B SOR Providing and, fixing heavy duty flange type brass double compression

2025-26 type cable gland with rubber ring for PVC insulated armoured cable

Item no.4-6- complete with out going tails, insulating tape etc for following size of

(B) 2 to 4 core 6 Sq. mm 10.00 38.38 Nos

(C) 2 to 4 core 10 Sq. mm 20.00 38.38 Nos

(D) 2 to 4 core 16 Sq. mm 4.00 47.47 Nos

(E) 2 to 4 core 25 Sq. mm 4.00 51.51 Nos

R&B SOR Providing and, fixing heavy duty flange type brass double compression

2025-26 type cable gland with rubber ring for PVC insulated armoured cable

Item no.4-6- complete with out going tails, insulating tape etc for following size of

DTS NO Description

Qty. Rate per Amount

R&B SOR Solder less crimping type Aluminium lugs conforming to IS suitable for

2025-26 cable of following size evenly crimped with high pressure tool &

Item no.4-7- connected to switchgear terminals with brass/cadmium plated nut bolts in

1 an approved manner.

R&B SOR Making trench in soft soil of suitable width of 90 cm deep for laying cable

2025-26 or locating the fault all over the run and back filling the same and making

Item no.4-5- the surface as normal ground.

R&B SOR Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

2025-26 required depth for laying any size of cable or locating the fault all over the

Item no.4-5- run and back filling the same and making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] 0.00 357.54 Rmt

R&B SOR Providing and erecting iron clad cable route marker duly marked with

2025-26 ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement

Item no.4-5- foundation as directed by Engineer in charge.

R&B SOR Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

50 connecting accessories of same material at required depth in existing

Item no.4-5- trench for laying of cable. below ground / road surface for enclosing cable

(B)63mm outer dia 100.00 73.73 Rmt

(C))90 mm outer dia 50.00 95.95 Rmt

R&B SOR Supplying and laying of following size of Light duty “A” Class G.I . Pipe

2025-26 & erecting as directed by Engineer-in-charge. (C) 80 mm dia.

R&B SOR Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below

2025-26 ground across the road crossing or on floor with necessary material in an

Item no.4-5- approved manner and making the ground as per

(E)150 mm dia 10.00 263.61 Rmt

R&B SOR Providing and fixing approved make Perforated C type cable tray. Made

from pre- galvanized sheet steel. The cable tray should be bended as per

53 IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate

Item no.4-11- and GI hardware like nut - bolt and washers etc. erected on existing

R&B SOR Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor, fan motor,

54 condensing unit, water tank surrounded by evaporating, coil, thermostats, 0.00 55893.40 Nos

Item no.8-13- relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

R&B SOR Supplying and erecting water filter cum purifier with ultra violate

2025-26 technology. (Aquaguard / waterdoc model or equivalent symphony/

Item no.8-13- crystal/videocon model)

DTS NO Description

Qty. Rate per Amount

R&B SOR Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier

& Inverter & sealed maintenance free SMF batteries. The charger having

2025-26 operating capacity for input 160-270V AC & inverter having output

230V,50 Hz Ac with 0.8 load power factor with battery, over/under

56 voltage output with over load & short circuit protection equipment. The

Item no.8-15- system housed in CRC sheet duly powder coated paint with following

power backup.with MS painted batteries stand, 10% Overload capacity

for momentary load.

(A) 1 KVA with 1Hr Backup 1.00 29616.23 Set

(C) 3 KVA with 1Hr Backup 0.00 82941.20 Set

(D) 5 KVA with 1Hr Backup 0.00 130103.15 Set

(H) 10 KVA with 1 Hr Backup 0.00 268252.97 Set

R&B SOR Providing and erecting required size HOT deep Galvanised iron strip for

2025-26 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc.

Item no.3-14- using proper clamp.

R&B SOR Providing and erecting Pipe type earthing having 150 cms.long and

2025-26 cms. dia. galvanised iron pipe with coupling and buch buried in specially

Item no.3-14- prepared earth pit complete with necessary 8 SWG earth wire.

R&B SOR Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make

59 OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) &

Item no.3-14- having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to ctions from front

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 2.00 5760.03 Nos

Back filling Compound :1 no. Bag of 25 Kg.

G UTILITY PUMPS AND STARTERS

R&B SOR Supplying and erecting Direct on line starter with 30 Amp. (resistive @

230v) power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T.

Operated electronic overload relay in engineering grade plastic enclosure

for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high voltage

protection (above 480 v) and under voltage protection (below 330 v)

60 current sensing single phasing protection. Reverse phasing protection, 1.00 2168.47 Nos

inverse current characteristic overload protection with indication for On,

Item no.9-1- OL, HV,LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection. [Cat.II]

R&B SOR Providing & erecting open well horizontal mono block pump set with cast

iron body, complete for three phase submersible motor having [B] For

61 HP 3 phase open well horizontal mono block pump set suitable for 200 1.00 10734.28 Set

Item no.9-4- LPM @ 25 mtr head suitable for 50 mm dia delivery pipe CAT-II

R&B SOR Supplying & erecting approved make Automatic liquid level controller

2025-26 6A. with sensor testing as per instruction of Engineer in charge on site

Item no.9-5- complete with wiring connection with existing wires , with copper

1 conductor from pump to upper and lower tank.

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

2025-26 flexible Submersible copper cable approved make of following Size. . (b)

Item no.1-4- 3 Core x 2.5 Sq. mm.

G PUBLIC ADDRESS SYSTEM

R&B SOR Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

2025-26 frequency Response :50-1500HZ I3db

64 Tone Controls :Cut & Boost type 1.00 11298.87 Nos

LED Meter :5 LED Arrays

Item no.7-3- The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections.

R&B SOR Supplying , installing & testing approved make Microphone for Speech,

Music, & Close to lip singing with inbuilt protection against breath &

2025-26 wind noise with capability to capture sound from long distance & wide

65 area with frequency response 50 - 16000 Hz, having sensitivity 1.8mv / Pa 2.00 2654.28 Nos

Item no.7-6- & impedance 430 ohms(Lo -Z) supplied with quick detachable holder,

Mtr long. Twin core cable & 3 pin XLR connector.

R&B SOR Supplying & erecting recess wall mounting speaker with 5W rated input

power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response

2025-26 with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic

66 cabinet of colour match with wall or ceiling of following size. (b)Square 20.00 591.86 Nos

shaped 260 x 260mm size speaker

R&B SOR Supplying microphones stands with sturdy mechanism, treble free

movement & positioning of microphones, free from rust with superior

67 quality of chrome plating with following size. (c)Fixed height 91 cms. & 1.00 445.41 Nos

Item no.7-6- extendable up to 62 cms. with round base of dia. 23 cms.

R&B SOR Supplying and erecting Flexible PVC insulated multistrand multicore

2025-26 kv grade ISI marked copper wires of following size to be erected as

Item no.1-4- directed. d) 1.50 Sq.mm 2 core round PVC sheathed

H MISCELLANEOUS ITEMS

69 M.R. SETC of M.S. Fabrication work 100.00 126.00 Kg

70 M.R. Pre-cast RCC inspection chamber square 6.00 1150.00 Nos

TOTAL FOR ELECTRICAL ITEMS (INCLUDING LABOUR CESS

AND WITHOUT GST)

TOTAL DEPOT BUILDING CIVIL WORK

SUB ESTIMATE 2 WORK SHOP BUILDING

(A) WORK UPTO PLINTH LEVEL

Item No. DTS NO Description Qty. Rate per Amount

Excavation for foundation includ.sorting out & stacking of useful

1 1A ,B materials & disposing of the excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. With Machinaries

(A) loose or soft soil

( II ) 1.5 To 3.0 MT Depth 887.00 136.47 CM

(III) 3.0 To 5.0 MT Depth 272.00 149.65 CM

Providing Dry Rubble Soilling of various thicknessto required grade

2 120 including trimming of earth work hand packing the interstics with Quarry

Spalls complete for all leads and lifts.

(A) Foundation and plinth 328.00 1094.11 CM

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

3 90 disposal of the surplus excavated soil as directed within a lead of 50 M.

For following diameter of piles.

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded

4 88 stone agg. 40 mm nominal size) & curing comp. incl.cost of form work in

(A) Foundation and Plinth 89.00 2769.69 CM

DTS NO Description

Qty. Rate per Amount

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

5 88C agg 20m.m Nominal size)&curing comp. incl. cost of form work in :

(A) Foundation and Plinth 85.00 3095.25 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) as

per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement.

(A) foundation, footing, base of columns and mass concrete 337.00 4332.50 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision) as

per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement.

(1) Having cross sectional area upto

upto G.L./P.L. 0.00 12930.68 CM

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

upto G.L./P.L. 0.50 11253.32 CM

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 50.50 9288.03 CM

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0.00 9083.57 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

upto G.L./P.L. 0.00 8155.37 CM

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 74.00 7067.84 CM

upto Basement to G.L./P.L. 18.00 8336.43 CM

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

8 5,4 comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C.

Work in : Up to G.L./P.L. (A) COLUMNS:

(1) Having cross sectional area upto

upto G.L./P.L. 3.00 12844.32 C.M.

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

upto G.L./P.L. 0.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0.00 9201.68 C.M.

Providing and fixing TMT bars Fe-500 steel reinforcement for R.C.C.

work including binding, bending and placing in position as per design &

BBS of structural consultant etc. comp. Up to G.L./P.L.

Upto G.L./P.L. 61450.00 77.29 Kg.

Providing and constructing brick work using fly ash building bricks

10 9 having crushing strength not less than 35 kg/sqcm. in foundation and

plinth in cement mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 48.00 4441.11 CM

Filling in trenches with available excavated soil incl. Watering and

11 14 consolidating etc. comp inclu. Spreading the available soil as per 1621.00 136.92 CM

instruction of engineer in charge etc.complete.

Filling in foundation and plinth with yellow or selected soil in layer of

12 13 cm thickness including watering ramming and consolidationg etc.comp. 335.00 301.78 CM

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

13 19A cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical (two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge. all floor

DTS NO Description

Qty. Rate per Amount

upto G.L./P.L. 73.00 324.00 SM

Providing & Laying green polished kota stone slab flooring at all floor

levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand) laid

14 44 over&joined with grey cement slurry incl. Rubbing & polishing etc. comp.

(A) 25 mm. (Tolerance +/- 2mm) For all Floor

Ground Floor 5.00 1019.39 SM

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one

15 Self Expl . percent is recommended i.e. one litre 20 EC chemical emulsion with 19 559.00 87.03 SM

liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended

Total amount upto plinth

Total amount upto plinth

(B) WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

16 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

(1) Having cros sectional area upto 0.08 sq. mt

Ground Floor 0.00 12930.68 CM

First Floor 0.00 12971.23 CM

At Terrece Floor 0.00 13011.78 CM

(2) Having c/s area > 0.08 & upto 0.12 sq.mt.

Ground Floor 0.00 11253.32 CM

First Floor 0.00 11293.87 CM

At Terrece Floor 0.00 11334.42 CM

(3) Having cros sectional area> 0.12 sq.mt.

Ground Floor 51.00 9288.03 CM

First Floor 35.50 9328.58 CM

At Terrece Floor 13.50 9369.13 CM

(1) Having c/s area up to 0.08 sq. mt.

Ground Floor 0.00 9083.57 CM

First Floor 0.00 9124.12 CM

At Terrece Floor 5.00 9164.67 CM

(2) Having c/s area > 0.08 & upto 0.12 sq.mt.

Ground Floor 0.00 8155.37 CM

First Floor 0.00 8195.92 CM

At Terrece Floor 0.00 8236.47 CM

(3) Having cros sectional area> 0.12 sq.mt.

Ground Floor 78.00 7067.84 CM

First Floor 44.00 7108.39 CM

At Terrece Floor 3.00 7148.94 CM

(1) Slabs having > 8 Cm & upto 10 Cm th.

Ground Floor 0.00 7965.38 CM

First Floor 0.00 8005.93 CM

At Terrece Floor 0.00 8046.48 CM

(2) Slabs having > 10 Cm & upto 13 Cm th.

Ground Floor 0.00 7377.92 CM

First Floor 0.00 7418.47 CM

At Terrece Floor 0.00 7459.02 CM

(3) Slabs having more than 13 Cm thickness.

Ground Floor 30.00 6793.97 CM

First Floor 74.00 6834.52 CM

At Terrece Floor 5.00 6875.07 CM

D) R.C.C. PARDI

Ground Floor 2.00 8336.43 CM

First Floor 1.00 8376.98 CM

DTS NO Description

Qty. Rate per Amount

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

17 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

(A) Staircases including landings etc.

Ground Floor 5.00 7765.80 CM

First Floor 5.00 7806.35 CM

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest revision)and

18 3C,4 as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement for reinforced concrete

Ground Floor 5.00 9963.33 CM

First Floor 5.00 10003.88 CM

At Terrece Floor 1.00 10044.43 CM

Ground Floor 6.50 7119.46 CM

First Floor 6.50 7160.01 CM

At Terrece Floor 1.50 7200.56 CM

Providing and fixing TMT bars Fe-500 steel reinforcement for R.C.C.

19 7 work including binding, bending and placing in position as per design &

BBS of structural consultant etc. comp.

Ground Floor 33945.00 77.29 Kg

First Floor 26200.00 78.34 Kg

At Terrece Floor 5955.00 79.39 Kg

Providing & construction brick work using Fly Ash bricks having

20 8 crushing strength not less than 35 Kg./sq.cm. in foundation & plinth in

C.M. 1:6 (1 cement:6 sand ) etc. comp In charge.

Ground Floor 130.00 4729.83 CM

First Floor 115.00 5018.55 CM

At Terrece Floor 41.00 5307.27 CM

Providing & constructing Half brick masonary in Fly Ash bricks having

21 12 crushing strength not less than 35 kg/sq.cm in c.m 1:4 (1 cement: 4 sand)

curing etc complete.-

Ground Floor 57.00 712.81 SM

First Floor 48.00 719.37 SM

At Terrece Floor 35.00 725.94 SM

Providing and applying 10mm. thick cement plaster in single coat on

brick/concretewalls for plastering and finished even and smooth with a

floating coat of near cement slurry mixed with proportion etc. complete in

cement mortar 1:3 (1 cement : 3 sand )

(A) for wall and similar surfaces

Ground Floor 1058.00 199.28 SM

First Floor 683.00 228.84 SM

At Terrece 192.00 258.39 SM

(B) Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor for ceilings and soffits of

Ground Floor 253.00 225.34 SM

First Floor 557.00 254.89 SM

At Terrece 30.00 284.45 SM

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

23 19A cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical (two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge. all floor

All Floor 1207.00 324.00 SM

DTS NO Description

Qty. Rate per Amount

Providing and fixing 150mm wide, approved quality chicken wire mesh

(FRP/ PVC)at junction of brick work and RCC work or two dissimilar

24 SELF EXP. surfaces, at all heights fixed by nails, rowal plug sortag by cement mortar

1:3 before applying the plaster, including curing, scaffolding all complete

All Floor 266.00 102.00 SM

25 20 Prov 35 mm wide throating of plaster drip etc.comp 160.00 43.74 RM

Providing and applying 20mm. thick cement plaster patta of c.m. 1:3 (

1cement : 3 sand ) etc. comp.

All Floors 64.00 50.00 RM

27 SELF EXP. Providing of 20mm deep finished groove etc.comp

All Floor 240.00 50.00 RM

Providing & laying granite slab 18mm thick in flooring, treads of steps

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

28 97A coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in

white or colour cement including rubbing and polishing complete. (Basic

Rate:- Rs.1347.46/S.M.)

All Floor 140.00 2410.00 SM

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

29 97B Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

All Floor 27.00 2449.00 SM

Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

30 97C with nessary adhesive material and finished with flush pointing in white

or colour cement, including rubbing & polishing comp.. (Basic Rate:-

All Floor 151.00 2026.00 SM

(C ) Labour Charges For Edge Finished For Granite 965.00 43.43 RM

Providing & Laying green polished kota stone slab flooring at all floor

levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand) laid

over&joined with grey cement slurry incl. Rubbing & polishing etc.

comp.(A) 25 mm. (Tolerance +/- 2mm) For all Floor

All Floor 382.00 1019.39 SM

Providing & Laying polished kota stone of machine cut edge slab 25 mm.

th. in riser of steps, tread, dedo & pillars center piece not less than

32 45 mt.in width &side pieces of equal size as per design, laid on 10 mm.th.

C.M.1:3(1 cement:3 sand)joined & polishing etc. For all Floor

All Floor 29.00 1130.79 SM

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads ofsteps & Landing laid on bed of 20 mm (Average) base of

cement mortar1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on

33 47B existingflooring by adhesive material including dismentaling of existing 51.00 1467.72 SM

flooringand jointed with colour cement slurry including finished with

flush pointing& cleaning the surface etc. comp.Size 24" x 24" (Basic Rate-

Rs.485.0/S.M.)or Antiskid tiles Tiles size and make as per

architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

3coarse sand) and jointed with white cement slurry. Tiles size and make

as per architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

35 47D (1 cement : 3 coarse sand) finishing with flush pointing in white cement. 216.00 1531.82 SM

Tiles size and make as per architect/consultant selection.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry. Tiles size and make as

per architect/consultant selection.

DTS NO Description

Qty. Rate per Amount

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate

shall be as per approved shade & texture, of make incl. Heavy S.S. Hinges

with nessary screws & Anodized aluminum fixtures & fastenings For all

For all Floor 43.00 3720.00 SM

Providing and fixing 35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frmae is to be filed up

with injected polyurethene foam done in situ along with embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole

38 95A FRP shutter is to be water proof weather proof,termite proof &resistance 17.00 2019.98 SM

to mild acid/alkali. Rates are to be inclusive of S.S.hinges with fastener

sleeve & alluminium fixtures & fastentings. Product should have 3 years

performance guarantee and company have ISO 9001-2000 certificate.

Providing and fixing make : veka , Three Track Sliding Door UPVC

Window (2 Shutters + 1 Mosquito Net Shutter) 3 T / 2 S Glass &

Shutter Net SL Window Profile I-60 Sliding,Glass 5mm Clear Reflactive

Glass,900 Reinforcement As per Requirement Frame Laminated Profile

Slider O/F 3 Track Frame ( 108 x 45 ),Slider Win. Sash 58 mm ( 39 x

),Bead Type Default

39 98D Viewed From Inside Mosquito Net Fiber Mesh

Lock Type & Coloure Touch Lock Black

SL Roller Single Roller Bearing,Wind Pressure 100, With Epdm Rubber

Gasket, Air Lock Strip And Finishing Joints With Silicon Sealant, With

Powder Coated Standard Aluminium Fittings.To Add Mosquito Net

Shutter For All Windows Of Rooms.

(A) Same as above but Colour anodized 86.00 8764.00 SM

Providing and fixing make : veka , Four Track Sliding Door UPVC

(3 Shutters + 1 Mosquito Net Shutter) 4 T / 3 S Glass & 1 Shutter Net SL

Window Profile I-60 Sliding

Glass 5mm Clear Reflactive Glass,900 Reinforcement As per

Requirement Frame Laminated Profile

Slider O/F 4 Track Frame ( 156 x 45 )

Slider Win. Sash 58 mm ( 39 x 58 )

40 98E Viewed From Inside Bead Type Default Mosquito Net Fiber Mesh Lock

Type & Coloure Touch Lock Black

SL Roller Single Roller Bearing

, With Epdm Rubber Gasket, Air Lock Strip And Finishing Joints With

Silicon Sealant, With Powder Coated Standard Aluminium Fittings.To

Add Mosquito Net Shutter For All Windows Of Rooms.

(A) Same as above but Colour anodized 4.00 9520.00 SM

Providing And Fixing Standard Extruded Of Aluminium Section Of Size

100 x 50 mm Std Allu. Box Frame Standard Extruded Colour Anodized

41 98C Aluminium Frame With 6Mm Thick Transparent Tinted Float Glass Of

Standard Make, for Fixs Glazzing with 150 to 230 mm glass Whole.

Providing And Fixing make : veka ,Ventilation,Profile I-60

Casement,5mm Glass Bajri Glass, 750 Reinforcement Full

Frame Laminated Profile

42 98B Compa Case Fra 60 x 55 mm

Viewed From Inside Mullion 60 x 74 mm Bead Type Default

, With Exhaust Fan. for Ventilation.

(A) Same as above but Colour anodized 6.00 6722.00 SM

Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

43 34A frame around square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red lead paint

(A) Plain grill For all Floors 1670.00 109.41 Kg.

DTS NO Description

Qty. Rate per Amount

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

44 86 with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

All Floor 11.00 6158.35 S.M

Applying Priming coat over new steel and other metal surface after over

and including preparing the surface by throughly cleaning oil, grease dirt

and other foreign matter and scoured with brushed fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

45 35 lead. Providing & applying painting two coats at all floor levels on new

steel other metal surface with synthetic enemal paint, brushing interior to

give an even shade incl. cleaning the surface of all dirt, dust & other

foreign matter etc. Comp.

(A) For plain grill For all Floor 226.00 105.31 SM

Apply two coats of Birla or Asian acrylic lappy (putty) and two coats of

primer of approved brand and manufacture on new wall surface to give an

46 35B even shade including thoroughly brushing thr surface free from mortar

dropping and other matter and sand papered smooth.

All Floor 2778.00 40.59 SM

Wall painting with two coats of Acrylic emulsion plastic paint of

approved brand over existing surface to give an even shade & surface free

from mortar dropping & other foreign matter & sand papered smooth etc.

(A) for wall and similar surfaces

All Floor 1933.00 83.36 SM

(B) for ceiling

All Floor 597.00 35.41 SM

Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by

the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a

wire/ stiff coir brush, followed by water jetting if required. Fill up all

48 93A minor cracks and defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly using

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

All Floor 695.467 82.00 S.M

Providing and applying textured plaster as per design of Berger Ruff N

turf, ICI Dulux or of Asian paint as per manufacturers specification and

directions in shade and colour approved by architects, on exterior surfaces

49 SELF EXP. of the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and manufacturers.

All Floor 696.00 538.00 S.M

DTS NO Description

Qty. Rate per Amount

Supply and installation of Exatech FVH Porcelain Extruded Panels for

Ventilated Facade of size 1200x600x20±2mm Colour MC Land, MC

Gris, MC Opal having a weight of 31.68 kg/m2 in a horizontal/vetical

direction on the building facade having water absorption of <0.5% as per

ISO 10545 and the breaking strength >6000N. The panels has to have

class 5 stain resistant property.The Exatech extruded panels should

comply to Certificate of compliance with the requirements of ISO 9001:

2015 Quality management systems No.ES09 / 6403, Certificate of

50 121 compliance with the requirements of ISO 14001: 2015 Environmental

management systems No. ES03 / 0644 / MA, Certificate of compliance

with the requirements of ISO 45001:2018 Occupational Health and Safety

management systems.No. ES20 / 87764. Certificate of the EXA |TECH|

ceramic panel of reaction to fire classification according to EN 13501-1:

2019 and reaction to fire according to ASTM D1929-16.

Exatech Facade Panels to be installed using ventilated rainscreen

principle, with provision for natural ventilation of the space between the

facade tile and the structural wall of 30mm-100mm.The panels should be

fixed to a supporting aluminium framework consisting of vertical T

section measuring 100x60x2mm spaced at 1200mm c/c intervals. The

retention bracket should be measuring 50x60x3mm and the holding

bracket should be measuring at 120x50x3mm at corners and C clamps

measuring 56x21mm fixed on top of the vertical sections. The vertical

T/L sections shall be fixed to the wall using Klimas anchor fasteners for

MS framework/brickwork/RCC as applicable, spaced at maximum

1100mm c/c vertically(actual spacing to be based on the structural/static

calculation). The brackets shall be fixed to the vertical aluminium T/L

profile using two stainless steel self tapping hexagonal head screws of

dimensions 5.5x22mm. Horizontal aluminium C clamps measuring

56x21x2.5mm shall be fixed on top of the vertical aluminium T/L seor 4-5

hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

d by Engr. in charge.,as per architect instructions.tching to the grid. The

tiles shall be mounted on the clips such that the tiles are supported at the

top and bottom. The vertcal joint between adjacent tiles to be 6mm open

All Floor 6291.00 941.00 SQ.FT.

Providing and Fixing Hollow steel Sections Framed Work including

Hoisting, Welding Fixing in position Purlin, Main

Chordetc.asperEngineer

in-charge.TATA / JINDAL / ASIAN Make,Steel work welded in built up

51 99 sections, framed work including cutting, hoisting, fixing in position and 676.00 126.00 KG

applying a priming coat of red lead paint (A) in beams & joists channels

angles, tees, flats with connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers & the

like.Making M.s. Ladder , M.s. Gate , M.s. Railling etc

providing and fixing rolling shutte s of approved make madeof 80mm

M.S. lathsinter locked to gether through

theirentirelenghtandjointedtogether

at theends by end locksmountedon specially designedpipe shaft with

bracket plates, guide channels and arrangements for inside and outside

52 83 lockingwithpush-pull operation includingthecostof hoodcoverandspring 131.00 11046.01 SMT

etc. complete. (B) Shutters having width 3.5 M and above with auto gear

sutter with motor extra add 6500 per sq.mt. (=4546.01+6500 = 11046.01)

DTS NO Description

Qty. Rate per Amount

Providing and constructing sandwitch type Polish Kota Stone cooking

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish

Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota stone

patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

53 self expl. 10mm th. plaster in 1:3 with finishing smooth with cement slurry as 4.00 3128.00 RMT

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors.

Providing and filling Epoxy grout of approved or suggested brand by

54 self expl. consultant / Engineer incharge in 4mmto6mmthick tiles joint including 400.00 40.00 RMT

spacer with cleaning of joint by vacuum or blower etc

Providing and fixing the S.S. Tubular/Angles/Flats 304 as per the given

Arch's design and engineer-in-charge. Rate to include welding, lifting,

55 116 placing, electric rods etc. complete welding rods to be used as per the 224.00 450.00 KG.

Indian Standards. (as per approval of architect's specification ,selection &

Extra for additional height of proping 4.0 m beetween supporting

tempropery brick or stone pillors for supoorting as required (R&B SOR

24-25, CH-9, P. No 97,),as per architect instructions and suggestion.

(i) Height more than 4.0m and up to 5.0 m 0.00 407.75 SM

(ii) Height more than 5.0m and up to 6.0 m 0.00 714.85 SM

(iii) Height more than 6.0m and up to 7.0 m 0.00 607.98 SM

(iii) Height more than 7.0m and up to 8.0 m 342.00 915.08 SM

Total amount above plinth

Total amount above plinth

(C) WATER SUPPLY AND SANITARY ITEMS

Providing and fixing Wash Down Water closet European type W.C. pan

with integral P or S trap with normal closing seat cover L bend including

57 53b jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (A) Viterous china pattern - I low pressure type , as per architect

Make- Cera, Parry ware, HindWare- 350 x 500 x 390 mm 6.00 1356.81 No

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

58 53a water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera, Parry ware, Jaquar ,HindWare 4.00 1471.41 No

Providing & fixing Wash Hung basin with single hole for pillar tap , Size-

550 x 400 x 200 mm at all floor levels, with C.I. or M.S. Brackets painted

59 54 white incl. cutting holes & making good the same etc. complete. For all

Floor Make- Cera, Parry ware, Jaquar , as per architect instructions.

All floor 6.00 2132.94 No

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

wooden plugs with C.P.brass screws and washers etc. For all Floor , as per

architect instructions.

All floor 6.00 859.41 No

Providing & Fixing PVC Nanhi trap 31/2" ht.of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make at all floor levels of self cleaning design with

61 56 screwed down or hinged grating incl. cost of cutting making good the

walls & floors etc. For all Floor, as per architect instructions.

All floor 20.00 586.27 No

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type

"B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe

etc. jointed with resin of approved brand & manufacture etc. comp.

(M.R.) , as per architect instructions.

DTS NO Description

Qty. Rate per Amount

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size

63 57 (inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3

etc. comp. (i) Square mouth traps---(A) 100mm x 300mm Size -P type , as

per architect instructions.

(B) 150mm x 100mm Size- P Type 4.00 1246.92 No

Providing and fixing 10cm. x15 cm.(4" x 6") S.W. trap with 0.45 x

mts. clear opening sewer trap chamber with 23cm. th. brick masonary

walls in c.m. 1:8 with cement plaster 12mm. thick in c.m. 1:4 inside and

outside to exposed faces bedding concrete 1: 5:10 and fixing C.I. cover

Kg on top etc. comp. ,as per architect instructions.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

65 59 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing

C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe , as per architect

Same As Above But Precast RCC Heavy Duty Cover Isstead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 4.00 242.39 No

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M 1:1

66 60 of following nominal internal diameters incl. Testing of pipes and joints

etc. Comp , as per architect instructions.

Providing and laying in trenches galvanised mild steel tubes (medium

67 61 grade) of the following nominal bore and tube fittings etc. complete. , as

per architect instructions.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at

68 84A every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. , as per architect

63 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fitting and clamps

69 including making good the wall, ceiling and floor etc. complete. (R&B

SOR 24-25,CH -23 PG 161) , as per architect instructions.

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete.low pressure

type Make- Cera, Parry ware, Jaquar ,HindWare , as per architect

All floor 0.00 1526.42 No

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe. low pressure type Make - Cera, Parry

ware, Jaquar ,HindWare , as per architect instructions.

All floor 8.00 1009.90 No

DTS NO Description

Qty. Rate per Amount

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

72 63 polished bright etc. comp.Make- Cera, Parry ware, HindWare , as per

architect instructions.

All floor 12.00 1353.77 No

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

Make- Cera, Parry ware, HindWare

All floor 6.00 1457.97 No

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P.

copper connecting pipe 450 mm long and nuts, washer and brass flange

74 63b complete, low pressure type including cutting and making good the wall

where required. , as per architect instructions.

Make- Cera, Parry ware, HindWare

All floor 10.00 1564.36 No

Providing and Fixing of PVC Stop Coc/valve for UPVC line at all floor

75 Self Exp. level as directed by Engr.Incharge, etc. complete. , as per architect

Providing flush cock consisting lever, cartridge sleeve & flange &

76 65 concealed part Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 10.00 2056.47 No

Providing and fixing Towel Ring 300 mm long fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall flange at

77 Self Exp. end of bars with heavy duty anchor fasteners & accessories. Make- Cera,

Parry ware, Jaquar ,HindWare , as per architect instructions.

All floor 4.00 924.24 No

Providing & fixing S.S.towel rail of 600 mm long approved make

including, providing & fixing C.P. brass screws, making holes in walls &

making good. Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 4.00 1100.42 No

Providing & Fixing stainless steel recessed type Soap dish of approved

make. Including providing & fixing screws, washers, cutting & making

good the walls.Make- Cera, Parry ware, Jaquar ,HindWare , as per

architect instructions.

All floor 4.00 839.91 No

Providing & fixing white vitreous china Urinal as per IS-2556 (Part-2 )

with C.I. hangers and 15mm dia. C.P. spreader,32mm diaWaste Coupling

Full thread ,130 mm Height ,Sprinkler with Pipe and pipe to wall with

80 Self Exp. C.P. flange complete including cutting and making good the walls and

floors wherever required. low pressure type Make- Cera, Parry ware,

Jaquar ,HindWare , as per architect instructions.

All floor 8.00 2535.70 No

Providing and fixing abonite ball cock of approved quality as directed etc.

comp.,as per architect instructions.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all

82 91 floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) , as per architect

Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length

etc.,as per architect instructions.

All floors level 6.00 101.91 No.

DTS NO Description

Qty. Rate per Amount

Providing & fixing Z - clamps at all floor levels of approved design to C.I.

S.C.I or PVC pipes including the cost of cutting holes & making good the

wall etc. Complete - 100 mm. dia. (M.R.),as per architect instructions.

(D) 150 mm to 200mm Dia. 50.00 98.00 No

Providing & Fixing in position PVC Cowl vent to pipes of

85 74 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.,as per architect

Providing and laying ordinary C.C. 1:1.5:3 mix for R.C.C. work including

boxing centering,vibrating, curing and mixed with approved water

proofing cement compound or "CEMWET" or "PIDICRETE LW"

intergral water proofing addmixture as water proofing agent to be mixed

with 50 kgs. cement bags shall be as recommended by the manifacture of

the water proofing material, concrete work for top, bottom slab and side

pardi for underground tank and item inclusive necessary excavation and

refilling the available earth, 15 cm th C.C. 1:4:8 for bedding conc., half

B.M. in C.M. 1:4 outside wall, inside pardi as per design, 10 mm th water

proffing cement plaster in C.M. 1:3 with smooth finishing, watering etc.

86 76 comp. to all inner face of tank curing etc. comp. incl. PVC steps, outlet

inlet, over flow and wash out pipe arrangment as necessary with

M.S.Cover of 25 Kgs. with locking arrangement fixing glazed tiles of

approved make such as Orient, Kajaria, Jhonson,Nitco,Somani ,Bell or

equivalent make of commercial quality of appor 4-5 hours. Application of

putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather

shield max paint

d by Engr. in charge.,as per architect instructions.

Under Ground water Tank 60000.00 6.87 Lit

Providing erecting and fixing double coated Syntex/Super/Reno PVC

(ISI) mark water tank of required capacity each with all necessary fittings

& connection etc. complete on terrace.,as per architect instructions.

Providing and fixing C.I. Manhole cover 0.60m.x0.45m. Size having

weight not less than 35 kg.,as per architect instructions.

Providing and filling in depressions of Bath and W.C. At all floor levels,

after completing plumbing work of pans, pipes,traps etc.with cinder or fly

ash as directed by Engineer in charge etc. comp. as per architect

(1) The whole work is to be executed through specialised agency with a

90 89a,b guarntee of 10 years given no a prescribed proforma duly stamped

(2) the rate shall niclude for work at all floors and conducting water proof

test as directed.

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of the

depression & about 18mm th' On the side walls of the depression up to the

floor level, water proofing plaster about 18 mm. th' be continued on the

walls above the floor level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge ,as per architect

DTS NO Description

Qty. Rate per Amount

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm th.

in C.M. 1:4 added with special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false chequered marking

of 300 mm.size.The treatment is carried along the vertical surface of the

parapet & other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to

be down in order and as directed and specified by the engineer-in-charge.

With average thickness of 120 mm and minimum thickness at khurra as 555.00 511.00 SM

65 mm. ,as per architect instructions.

Self Expl Providing and laying broken chine mosaic flooring for terrace using

12mm to 20 mm broken pieces of glaze tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar crème out upto

91 surface using white cement including rounding off junctions them upto 15 555.00 779.70 SM

cm along the wall, clearing with water and oxalic acid etc. as directed.

(SMC SOR( 131) , as per architect instructions.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria,Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring,

treadsof steps & landings laid on a bed of 12 mm. Av.

92 46 Th.C.M.1:3(1cement :3sand) finished with flush pointing in white cement 38.00 900.29 SM

etc.com. For all floors (Basic Rate:- Rs.285.0/S.M.)

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria,Jhonson,Nitco,Somani,Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including

93 47 necessary cement paste for fixing and joined with white cement slurry 65.00 932.02 SM

etc.complete. For all floors (Basic Rate:- Rs.285.0/S.M.)

A) Fabricating, moulding, supplying and fixing in position stainless steel

flats, weldmesh, perforated metal sheet, plates, brackets, etc for seat,

ticket counter and dustbin, satin finish of 304 L M grade as per detailed

drawing and design including argon welding, perforating, grinding,

cutting, moulding, casting, bending and profile laser cutting. cleaning and

buffing complete with all accessaries and hardware including screws,

bolts, rivets, washers, hinges, pivots, locks, handles, anchor fasteners,

94 Self Expl PVC Bushing etc complete. All S.S. material to undergo spectro analysis 30.00 450.00 kg

confirming to 304 grade. (Only actual finished measurements excluding

wastage will be paid for). Steel to be used has to be non-magnetic. Satin

finish sample to be approved by the consultant. All grinding and polishing

to be done with uni-directional finishes where polishing must be carried

out in the direction of pattern of the rest of the satin finish surfaces.

B) Do as 7.02 but extra for Water jet / laser profile cutting as per desired

lettering and logo as per designs.

Providing, Supplying, Fixing & Finishing of Cloth banner with size less

95 Self Expl 16.00 23.60 Sq.Ft.

than 8' x 4'.140 GSM

Providing, Supplying, Fixing & Finishing of Flex banner with MS (Mild

96 Self Expl 48.00 53.10 Sq.Ft.

Steel) framing for any size 240gsm pipe size 25 x25x1.5mm)

DTS NO Description

Qty. Rate per Amount

Providing, Supplying, Fixing & Finishing of Eco Vinyl with Lamination

97 Self Expl 15.00 55.46 Sq.Ft.

on PVC sheet. (2) 5 mm Sinages.

Supply and fixing of approved make PU tactile indicators tiles (item code

ET-ITT010 & item code ET-ITT009) of approved quality and make with

98 Self Expl 100.00 500.00 Sq.Ft.

builtyl fix with adhesive tiles size 300 x 300 mm , as per site situation and

direction by EIC.

Paiting lines,dashes,arrows,letters etc on roads,air-fields and link in two

coats with road marking / PU paints,brushing including cleaning the

99 Self Expl 40.00 110.00 R.ft.

surface of all durt,dust and other foreign matter(ii) over 10 to 20 cm in

Providing and fixing Grab Bars (for physically challenged persons) of

Stainless Steel, 32mm dia, 18(G) 1.2mm wall thickness, brushed finish,

ASIS 304 Grade of following sizes of standars make with necessary with

necessary fixture & fastenings of S .S.-304 grade, load carrying capacity

100 Self Expl of 130Kg, etc complete of standard make like CERA,EURONICS etc

asper the instructions of Engineer in -charge.

A) Grab Bar 600(L)x150(D) to be fixed with wall 2.00 2500.00 Set

B) Corner 90 degree bend 600(L) x 600.(L) x150(D) to be fixed with wall

C) U shaped wall mounted hand rail with hinge 600(L)x100(D) 2.00 7350.00 Set

Providing and fixing Required E Staimless steel plate of 1.0mm thickness

with regular printed signage at top in black colour at top part of plate and

respective brialle lipi sgnages at bottom part the plate, S.S. Plate to be

fixed on 10mm thick clear acrylic sheet, this whole assembly to be fixed 8.00 645.00 Sq.Ft.

on wall with four numbers of SS studs etc complete as per instructions of

engineer in-charge.

Providing and fixing 0.4mm thick Stainless steel plate of with embosing

the braille lipi signages on the top rail of the hand rail fixed on

102 Self Expl ramp.(Size - 9" x 4"). etc complete as per instructions of engineer in- 4.00 450.00 Each

SITC CCS 2200 AHUJA brand Counter Communication System on

103 Self Expl controll inquiry room.etc complete as per instructions of engineer in- 1.00 12500.00 Each

104 Self Expl providing and fixing modular indicating call bell 1.00 366.00 Each

providing & supplying approval quality of heavy duty wheel chair with

105 Self Expl standard specification with seat belt and hand brack etc. comp 1.00 13570.00 Each

Supplying and fixing Board &Sinages with 3mm thick exterior grade

ACP of Aludecore,Alstrong or Eurobond brand with Vinyl letters

Reflective] including propore M.S.Structure of 45x45mm Hollow square

box section of 20guage with one coat of Anticorrossive paint and two coat

106 Self Expl of oil paint with required anchoring fastners etc .complete as per 5.00 2654.00 SMT.

directed.(ACP Board back ground indigo blue and front yellow colour

with 72 mm size of letter)

Total amount of Plumbing & Sanitation & handicap Items

Total amount of Plumbing & Sanitation & handicap Items

Electrification Work of WORK SHOP Buildings

Electrification Specification As per electrical DTS and Item Specifications

SR. UNIT RATE AMOUNT

NO. INCL. CC INCL.CC

A POINT WIRING AND ACCESSORIES

R&B SOR Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

2025-26 erected with 6A Modular type switch / bell push & accessories and earth

1 continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

Item no.1-2- plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

DTS NO Description

Qty. Rate per Amount

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Modular secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires, in below type of

2025-26 pipe to be erected complete with earth continuity and necessary

2 connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet

Item no.1-1- for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to 10 mtr length, in below type of

2025-26 pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of

3 following type erected on PVC / Metallic/Wooden box, single mounting

Item no.1-2- base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires erected in below

2025-26 type of pipe with 6A Modular type switches and following type of

4 accessories erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected

Item no.1-2- on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

2025-26 complete with Modular type switch & 5 pin Plug erected on PVC /

5 Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

Item no.1-2- accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

6 frame covered with textured / metallic/white front plate modules erected 21.00 257.55 Point

Item no.1-2- on / in wall / ceiling with following type accessories CAT-III

DTS NO Description

Qty. Rate per Amount

R&B SOR Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

2025-26 complete with Modular type switch & 5 pin Plug erected on PVC /

7 Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

Item no.1-2- accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete CAT-III

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

R&B SOR Providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC

insulated ISI marked stranded Copper conductor wire in following type of

2025-26 pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm

8 copper conductor FRLS PVC insulated stranded wire of green colour for

Item no.1-4- earth continuity of following size (A) With medium class Rigid PVC pipe

and accessories

R&B SOR providing and erecting Mains with 1.1 KV grade ZHFR/HRFR PVC

insulated ISI marked stranded Copper conductor wire in following type of

2025-26 pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

9 FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 100.00 112.11 Rmt

R&B SOR Supplying and erecting Flexible PVC insulated multi strand multi core

2025-26 kv grade ISI marked copper wires of following size to be erected as

Item no.1-4- directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed 400.00 46.46 Rmt

R&B SOR Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with necessary

11 connections as directed

Item no.1-6- 1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

2 (b) 3 nos. 6A 5 pin Plug

For modular accessories CAT-III 3.00 1133.22 Nos

R&B SOR Supplying & erecting Electronic Type Cordless Call Bell erected on

2025-26 PVC/Metal board having portable bell push working on D.C. & bell on

Item no.1-6- 230V A.C. supply with cells / battery

R&B SOR Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)

having double-locking arrangement with grooves, trunking of size not

13 below 12.5 mm in height as per IS with accessories of PVC/Resin

Item no.1-3- polypropylene not below 1.8 mm thick duly sealed in joint & erected on

5 wall / ceiling of following size .

R&B SOR Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

14 necessary PVC fittings & Junction boxes fixed with adhesive solution &

Item no.1-3- Clamps with following dia of pipes, in approved manner as directed

B LIGHT AND FAN FIXTURES

DTS NO Description

Qty. Rate per Amount

M.R. Supplying and erecting LED Batten aluminium extruded /Polycarbonate

with polycarbonate diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

15 CCT 4000 K to 6500K, Uniformity ratio >0.7, 296.00 450.00 Nos

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 % Lumen Range: 2100-2300 Lumens

M.R. Supplying and erecting LED Batten aluminium extruded / Polycarbonate

with polycarbonate diffuser with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

16 CCT 4000 K to 6500K, Uniformity ratio >0.7, 20.00 980.00 Nos

Luminaire efficacy> 100 lumens/watt

LED driver efficiency > 85 % Lumen Range: 3700-4000 Lumens

R&B SOR Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

17 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

Item no.2-15- lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

2 suitable LAMP holder

17.1 (ii) 5 to 8 watts CAT-II 10.00 80.80 Nos

17.2 (iii) 10 to 15 watts CAT-II 0.00 124.23 Nos

R&B SOR Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

2025-26 corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

18 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Item no.2-15- Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with all accessories complete. IP20

& > 3600 Lumens

(vi) 36 watts, 24" x 24", Surge- 2KV CAT-III 0.00 1794.77 Nos

mr. SETC of Powder Coated outdoor LED square / round Drum Light, 2000-

2500 Lumens, > 10 CM long

R&B SOR Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

2025-26 die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

20 with toughened glass with company mark/name engraved or embossed

Item no.2-16- 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(iI) 48 TO 60 watts CAT-III 0.00 5599.44 Nos

(iv) above 90 to 120 watts 0.00 7266.95 Nos

(vi)above 160 to 200 watts 0.00 9647.52 Nos

M.R. Providing & fixing of Twin Beam Halogen-LED emergency light cum

entry /exit light, 220V-240Volt AC, Li-Ion Battery with back up of 2-3

Hours, wall mounted, Powder coated MS sheet housing, Sign font size:

22 Inch, with necessary low/ over voltage, SC and battery overcharge cut off 0.00 2250.00 Set

protection, with minimum 2 nos of 4 watt LED Halogen Lights mounted

R&B SOR Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep

23 complete having 3 blades aluminium body and blade sets having 21.00 2311.89 Nos

Item no.5-1- ornamental design shanks , canopy erected with earthing. [ Make shall be

3 approved by Engineer in Charge]

R&B SOR Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in

2025-26 RCC slab with Making the site as original.

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

2025-26 Fan box.

R&B SOR Supplying & erecting approved make low noise decorative exhaust fan

2025-26 having square frame ABS body with inbuilt lowers & square frame.

Item no.5-3- 250mm with 1350 RPM Cat.II

R&B SOR Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cy/s.

2025-26 400 mm sweep oscillating, type and adjustable, height complete with

Item no.5-5- guard regulator, & standard lead flexible wires and plug top. CAT-III

C Electrical Distribution

M.R. Wall / Floor mounted front operated electrical panel made up from 2 mm

thick powder coated sheet steel with 7 tank process with following

configurations: (1) Incomer: 200 A, 4P MCCB with protections (2)

28 Digital Ammeter and Voltmeter with selector switch (3) Outgoing: 63 A 1.00 125000.00 Nos

4P, MCCB - 3 Nos with indicators and with analog metering

devices,including of Design panel.

R&B SOR Providing and erecting busbar chamber confirming to IS-375 fabricated

from 16 G.M.S. sheet, dust & vermin proof having hinged door with

rubber gasket and necessary busbar supports with COPPER busbar having

2025-26 current density not more than 1.6 Amp. / sq.mm (Rated current / cross

29 section area) duly wrapped with colour insulation tape for phase

sequence, three phase & neutral each suitable for following current

Item no.3-7- capacity with necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity 3.00 2602.77 Rmt

(B) Suitable for 200 Amp. Capacity 3.00 3061.31 Rmt

R&B SOR Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse

Unit Cubical type for panel mounting complete with operating mechanism

30 suitable to operate on 415V A.C. With HRC fuses of suitable load

Item no.3-3- confirming to IS. 13947 (Part I & III). of following capacities

R&B SOR Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth bar

2025-26 and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB

31 to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing sheet

steel double door (IP-43)

(ii)6 way 1.00 885.77 Nos

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) sheet steel double door (IP-43)

(ii)6 way 2.00 2913.85 Nos

(iii)8 way 2.00 3412.79 Nos

R&B SOR providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

2025-26 10 KA and suitable for operation on single phase 240 V,50Hz. having

33 characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

(i) 25 Amps. DP CAT-III 1.00 1969.50 Nos

R&B SOR Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

2025-26 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz.

34 having characteristic of quick action & tripping with all advance feature

& do not incorporate any electronic component for following Max. rating

2 erected as directed.

(II) 40 Amps. 4P CAT-III 2.00 2637.11 Nos

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing & erecting 240 V MCB double pole switch for lighting Load (B

2025-26 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

Item no.3-10- existing box having following capacity

(A) 6 to 32 Amp. CAT-III 2.00 278.76 Nos

R&B SOR Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

2025-26 curve) having 10KA breaking capacity & confirms to IS :8828 in existing

Item no.3-10- box having following capacity

(A) 40 Amp. CAT-III 2.00 638.32 Nos

R&B SOR Providing & erecting 240 V MCB double pole switch for motor &

2025-26 inductive load (C Curve) having 10 KA breaking capacity & confirms to

Item no.3-10- IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. CAT-III 1.00 299.97 Nos

R&B SOR Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

2025-26 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

Item no.3-10- existing box having following capacity

(A) 6 to 32 Amp. CAT-III 1.00 595.90 Nos

R&B SOR Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

2025-26 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

Item no.3-10- existing box having following capacity

(c)63 Amp. CAT-III 1.00 737.30 Nos

R&B SOR providing and erecting Miniature circuit breaker single pole 0.5A to 2A

2025-26 system and having breaking capacity 10 KA to be erected in existing box.

Item no.3-10- confirming to IS 8828/1996 with ISI Mark

R&B SOR providing and erecting Miniature circuit breaker single pole 6A to 25A

2025-26 suitable to operate on 240 V A.C. system and having breaking capacity

Item no.3-10- KA to be erected in existing box. confirming to IS 8828/1996 with ISI

1 (B) Mark CAT-III

D CABLE AND END TERMINATION

R&B SOR Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

2025-26 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Item no.4-3- necessary clamps or in existing trench / pipe of following size of cables.

(c) 3 core 6 Sq. mm 20.00 107.06 Rmt

(D) 3 core 10 Sq. mm 50.00 131.30 Rmt

(E) 3 core 16 Sq. mm 50.00 143.42 Rmt

(F) 3 core 25 Sq. mm 50.00 162.61 Rmt

R&B SOR Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

2025-26 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Item no.4-3- necessary clamps or in existing trench / pipe of following size of cables

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 100.00 183.82 Rmt

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 20.00 220.18 Rmt

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 300.00 284.82 Rmt

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 10.00 378.75 Rmt

R&B SOR Providing and, fixing heavy duty flange type brass double compression

2025-26 type cable gland with rubber ring for PVC insulated armoured cable

Item no.4-6- complete with out going tails, insulating tape etc for following size of

(B) 2 to 4 core 6 Sq. mm 10.00 38.38 Nos

(C) 2 to 4 core 10 Sq. mm 20.00 38.38 Nos

(D) 2 to 4 core 16 Sq. mm 4.00 47.47 Nos

(E) 2 to 4 core 25 Sq. mm 4.00 51.51 Nos

R&B SOR Providing and, fixing heavy duty flange type brass double compression

2025-26 type cable gland with rubber ring for PVC insulated armoured cable

Item no.4-6- complete with out going tails, insulating tape etc for following size of

DTS NO Description

Qty. Rate per Amount

R&B SOR Solder less crimping type Aluminium lugs conforming to IS suitable for

2025-26 cable of following size evenly crimped with high pressure tool &

Item no.4-7- connected to switchgear terminals with brass/cadmium plated nut bolts in

1 an approved manner.

R&B SOR Making trench in soft soil of suitable width of 90 cm deep for laying cable

2025-26 or locating the fault all over the run and back filling the same and making

Item no.4-5- the surface as normal ground.

R&B SOR Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

2025-26 required depth for laying any size of cable or locating the fault all over the

Item no.4-5- run and back filling the same and making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] 0.00 357.54 Rmt

R&B SOR Providing and erecting iron clad cable route marker duly marked with

2025-26 ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement

Item no.4-5- foundation as directed by Engineer in charge.

R&B SOR Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

50 connecting accessories of same material at required depth in existing

Item no.4-5- trench for laying of cable. below ground / road surface for enclosing cable

(B)63mm outer dia 100.00 73.73 Rmt

(C))90 mm outer dia 50.00 95.95 Rmt

R&B SOR Supplying and laying of following size of Light duty “A” Class G.I . Pipe

2025-26 & erecting as directed by Engineer-in-charge. (C) 80 mm dia.

R&B SOR Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below

2025-26 ground across the road crossing or on floor with necessary material in an

Item no.4-5- approved manner and making the ground as per

(E)150 mm dia 10.00 263.61 Rmt

R&B SOR Providing and fixing approved make Perforated C type cable tray. Made

from pre- galvanized sheet steel. The cable tray should be bended as per

53 IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate

Item no.4-11- and GI hardware like nut - bolt and washers etc. erected on existing

R&B SOR Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor, fan motor,

54 condensing unit, water tank surrounded by evaporating, coil, thermostats, 0.00 55893.40 Nos

Item no.8-13- relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

R&B SOR Supplying and erecting water filter cum purifier with ultra violate

2025-26 technology. (Aquaguard / waterdoc model or equivalent symphony/

Item no.8-13- crystal/videocon model)

DTS NO Description

Qty. Rate per Amount

R&B SOR Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier

& Inverter & sealed maintenance free SMF batteries. The charger having

2025-26 operating capacity for input 160-270V AC & inverter having output

230V,50 Hz Ac with 0.8 load power factor with battery, over/under

56 voltage output with over load & short circuit protection equipment. The

Item no.8-15- system housed in CRC sheet duly powder coated paint with following

power backup.with MS painted batteries stand, 10% Overload capacity

for momentary load.

(A) 1 KVA with 1Hr Backup 0.00 29616.23 Set

(C) 3 KVA with 1Hr Backup 0.00 82941.20 Set

(D) 5 KVA with 1Hr Backup 0.00 130103.15 Set

(H) 10 KVA with 1 Hr Backup 0.00 268252.97 Set

R&B SOR Providing and erecting required size HOT deep Galvanised iron strip for

2025-26 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc.

Item no.3-14- using proper clamp.

R&B SOR Providing and erecting Pipe type earthing having 150 cms.long and

2025-26 cms. dia. galvanised iron pipe with coupling and buch buried in specially

Item no.3-14- prepared earth pit complete with necessary 8 SWG earth wire.

R&B SOR Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make

59 OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) &

Item no.3-14- having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to . Comp. With

average thicknes

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 2.00 5760.03 Nos

Back filling Compound :1 no. Bag of 25 Kg.

G UTILITY PUMPS AND STARTERS

R&B SOR Supplying and erecting Direct on line starter with 30 Amp. (resistive @

230v) power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T.

Operated electronic overload relay in engineering grade plastic enclosure

for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high voltage

protection (above 480 v) and under voltage protection (below 330 v)

60 current sensing single phasing protection. Reverse phasing protection, 1.00 2168.47 Nos

inverse current characteristic overload protection with indication for On,

Item no.9-1- OL, HV,LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection. [Cat.II]

R&B SOR Providing & erecting open well horizontal mono block pump set with cast

iron body, complete for three phase submersible motor having [B] For

61 HP 3 phase open well horizontal mono block pump set suitable for 200 1.00 10734.28 Set

Item no.9-4- LPM @ 25 mtr head suitable for 50 mm dia delivery pipe CAT-II

R&B SOR Supplying & erecting approved make Automatic liquid level controller

2025-26 6A. with sensor testing as per instruction of Engineer in charge on site

Item no.9-5- complete with wiring connection with existing wires , with copper

1 conductor from pump to upper and lower tank.

DTS NO Description

Qty. Rate per Amount

R&B SOR Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

2025-26 flexible Submersible copper cable approved make of following Size. . (b)

Item no.1-4- 3 Core x 2.5 Sq. mm.

G PUBLIC ADDRESS SYSTEM

R&B SOR Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

2025-26 frequency Response :50-1500HZ I3db

64 Tone Controls :Cut & Boost type 0.00 11298.87 Nos

LED Meter :5 LED Arrays

Item no.7-3- The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections.

R&B SOR Supplying , installing & testing approved make Microphone for Speech,

Music, & Close to lip singing with inbuilt protection against breath &

2025-26 wind noise with capability to capture sound from long distance & wide

65 area with frequency response 50 - 16000 Hz, having sensitivity 1.8mv / Pa 0.00 2654.28 Nos

Item no.7-6- & impedance 430 ohms(Lo -Z) supplied with quick detachable holder,

Mtr long. Twin core cable & 3 pin XLR connector.

R&B SOR Supplying & erecting recess wall mounting speaker with 5W rated input

power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response

2025-26 with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic

66 cabinet of colour match with wall or ceiling of following size. (b)Square 0.00 591.86 Nos

shaped 260 x 260mm size speaker

R&B SOR Supplying microphones stands with sturdy mechanism, treble free

movement & positioning of microphones, free from rust with superior

67 quality of chrome plating with following size. (c)Fixed height 91 cms. & 0.00 445.41 Nos

Item no.7-6- extendable up to 62 cms. with round base of dia. 23 cms.

R&B SOR Supplying and erecting Flexible PVC insulated multistrand multicore

2025-26 kv grade ISI marked copper wires of following size to be erected as

Item no.1-4- directed. d) 1.50 Sq.mm 2 core round PVC sheathed

H MISCELLANEOUS ITEMS

69 M.R. SETC of M.S. Fabrication work 100.00 126.00 Kg

70 M.R. Pre-cast RCC inspection chamber square 6.00 1150.00 Nos

TOTAL FOR ELECTRICAL ITEMS (INCLUDING LABOUR CESS

AND WITHOUT GST)

TOTAL DEPOT BUILDING CIVIL WORK

(Sub Estimate-3) Paver block & C.C.RoAD

ITE DESCRIPTION

M SOR QTY. RATE UNIT AMOUNT

Box Cutting the road surface to proper slope and camber for making

1 100B base includinng removing the excavated stuff and depositing on the road

side slope as directed up to 50 mt. lead. 1883.00 109.41 C.M.

Preparation of subgrade with compacting, Leveling and consolidation of

subgrade with miniroller/plate vibrator machine including watering and

filling in depression occur the process as directed by engineer in charge.

Providing & laying Granular Sub Base confirming to Grading II of Table

400.2 of compacted th. Of 150 mm with specified graded stone metal

and sand mixed in place and laid with mechanical means spreading with

3 100 motor grader and compactiong with vibratory roller having miimum 80-

100 KN static weight to achieve desired dencity of 98 % of MDD including

all material, labour, machinery with all leads and lifts etc. comp.

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone

4 88B agg. 40 m.m Nominal size )& curing comp. incl. cost of from work in

:Foundation & Plinth 913.00 2606.92 C.M.

providing and laying 200 micron plastic sheet on prepared sub base as

per instruction of Engg. In charge etc. complete. 5713.00 26.00 S.M.

DTS NO Description

Qty. Rate per Amount

Supplying & filling fine sand (pana) in 75 mm compacted thickness over

the nbase including necessary compaction, watering etc. compacted.

6 101 Item includes levelling byusing vibratory plates compacted machine and

as directed by engineer in charge.

Providing 100mm th. Ready made c.c. kerb of strength M-20 (Size

300mm X 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line level and in truly vertical postion,

7 103 including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust

) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse sand)

including watering etc. complete and as directed by engineer in charge.

R.C.C kerb 380 mm depth and 300 mm width 350.00 228.00 R.MT

Providing interlocking type Rubber moulding cement concrete Paver

Block of approved shape, design & colour having 60 mm thickness (M-

35) Purchased from S.M.C's approved paverblock manufactures only &

8 102 fixing on fine sand bedding. Item includes leveling by using vibratory

plates compacted machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. Complete

With colour 280.00 524.00 S.M.

Without colour 280.00 524.00 S.M.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete. 3769.00 225.00 C.M.

Providing & laying cement concrete Pavement using M35 & Vaccuum

10 109 Dewatering technique including floating surface with a skim powder

floater, curing etc. complete.

Internal road 1145.00 6103.00 C.M.

Cutting of Groove 5.00 mm th. In VDS for depth of 2/3 of total thickness

with filling of Bitumen 1125.00 50.00 R.M

Providing and fixingTMT FE 500 Steel bar reinforcement for R.C.C. work

including binding and placing in position etc. comp.

Upto G.L./P.L. 34350.00 77.29 Kg.

Providing, Lowering & laying & excavation with lead of Readymade M-25

Vacuum wet Pressed cable (Dished) Channel (900 x 600 x 600mm and

100 mm thickness ) approved Brand manufacturer & setting in line level

and in truly vertical postion, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of

cement : 1 part of coarse sand) including watering etc. complete and as

directed by engineer in charge.

Upto G.L./P.L. 450.00 4985.00 R.M.T.

Total amount of Paver Block & C.C.Road

Total amount of Paver Block & C.C.Road

(Sub Estimate-4) Demolition

Item Description

Qty. RATE UNIT AMOUNT

Demolition including stacking of serviceable materials and disposal of

1 105 unserviceable materials with all lead and lift (i) RCC work 9.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of

2 106 serviceable materials and disposal of unserviceable materials with all 10.00 577.92 C.M.

Dismentalling tiled or stone floors laid in mortar including stacking of

3 107 serviceable material and disposal of unserviceable material with all lead 26.00 50.11 S.M.

Removing the scraping of old deteriosted plaster of any thickness from

4 108 wall/R.C.C. member and disposal of unserviceable from site of work with 40.00 20.55 S.M.

DTS NO Description

Qty. Rate per Amount

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the authority prior to

start of work. The rate shall also include cost of drilling of hole of

required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and other

necessary tools and tackles, positioning, providing and grouting

chemical, allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary scaffolding,

staging, labour, tools and equipments,

etc. complete as directed by the engineer-in-charge.

Total amount of Demolition

Total amount of Demolition

(Sub Estimate-5) Compound wall & Gate

Boaring holes 3.5 mt deep in ordinary soil(for cast in situ piles) &

1 90 disposal of the surpluse excavated soil as directed within lead of 50 mt.

loose or soft soil

for 250 mm dia 115.00 334.80 R.M

for 300 mm dia 0.00 401.28 R.M

Excavation for foundation including sorting out and stacking off useful

2 1A materials and disposing of the excavated stuff up to 50 mt. lead and all

lift, watering etc.comp.

( 1 ) up to 1.5 mt. Depth 15.00 123.13 C.M.

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone

3 88 B agg. 40 m.m Nominal size )& curing comp. incl. cost of from work in

:Foundation & Plinth (A) Foundation and Plinth

(A) Foundation and plinth 4.00 2606.92 C.M.

Providing & laying ordinary cement con.1:2:4(1cement:2sand:4graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C.

(A) foundation, footing, base of columns and mass concrete 6.00 3741.69 C.M.

Providing & laying ordinary cement con.1:2:4(1cement:2sand:4graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C.

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 0.00 8593.80 C.M.

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

upto G.L./P.L. 9.00 7665.60 C.M.

Providing and laying ordinary cement concrete 1:2:4 (1 cement :2 coarse

sand :4 graded stone aggregate 20mm nominal size) and finishing

smooth etc. complete including cost of form work but excluding the cost

of reinforcement for R.C.C. work in:

(1) Having c/s area up to 0.08 sq.mt. 6.00 12335.51 C.M.

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg. 20 mm

7 88C nominal size) & curing complete including cost of formwork in wall caps

& copping. 5.00 4085.83 C.M.

Filling in trenches with available excavated earth in layer not exceeding

8 14 20 cm in depth consolidating each deposited layer by ramming &

Providing and fixingTMT FE 500 Steel bar reinforcement for R.C.C. work

including binding and placing in position etc. comp.

Upto G.L./P.L. 3830.00 77.29 Kg.

DTS NO Description

Qty. Rate per Amount

Providing and constructing brick work using fly ash building bricks having

crushing strength not less than 35 kg/sqcm. in foundation and plinth in

cement mortar 1:6 (1 cement :6 fine sand) etc. comp.

At ground floor 51.00 4729.83 C.M.

Half Brick masonary in fly -ash brick having crushing strength not less

11 12 than 35 kg/sq.cm. in foundation and plinth in cement mortar

1:4(1cement:4 fine sand)

At ground floor 0.00 712.81 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

12 15 with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 199.28 S.M.

(B) For ceilings & soffits

At Ground Floor 0.00 225.34 S.M.

Providing & Applying 20mm. Th. Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

13 19A cement: 1 sand) apply thick cement slurry and apply roller horizontal as

well as vartical (two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge. all floor

At Ground Floor 490.00 324.00 S.M.

Providing 35 mm wide throating or plaster drip and moulding it to R. C.

C. chajja etc. comp.. For all floor

At Ground Floor 0.00 43.74 R.M.

15 SELF EXP. Providing 20 mm smooth plaster patta

At Ground Floor 370.00 50.00 R.M.

Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.)

At Ground Floor 393.00 50.00 R.M.

Providing & applying two coats of weather shield max paint (3 coats may

be required in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved