CA NO. GE /RKT/04 OF 2024-2025 REPAIR TO LEAKAGE/ SEEPAGE IN ROOFS, FLOORS AND WALLS OF CERTAIN BLDGS AND REPAIR TO CERTAIN B/R WORKS IN CERTAIN BLDGS AT CHAUBATIA UNDER GE RANKHET

Amount

Taking down wooden chowkhat or frame area not exc 1.5 sqm each with shutter (without taking off shutter from frame) as directed.

Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) as directed.

Taking down of shutters of any description not exc 1.0 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed.

Taking down of shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each and resecuring or easing and adjusting with refixing in same opening with using of necessary arrengements complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface complete all as specified and directed.

S&F 35 mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive gauze without sash bars, edges of framing plain fitted with cut and mitred beads for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(a) fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick Iind class hard wood glazed and skelton window and ventilators shutters open rebated and prepaired to received glass gauge etc diveded into square with sash bar edges of framing plain chamfered or rounded fitted with cut and mittered beads for sequring glass gauge etc , size of members of shutters as specified in MES SSR -I section 8 clause 8.24 (b) complete all as specified and directed.

M&L mild steel work in framed work such as grills, gratings, guard bars, doors etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately.

S&F power coated aluminum (minimum thikness of power coated 50 micron ) work for doors windows, ventilators and partition (fixed portion ) with extruded built up standard tubular section/approriate Z section and other section of approved make confirming to IS 733 and is 1285 , fixing with dash fasteners of required dia and size, inc.necessary filling up the gaps at junction , i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc aluminium sections shall be smooth and rust free straight , mitered and jointed mechnicallly where ever required incl. cleat angle . aluminium snap beding for glazing/paneling , C.P brass / stainless steel screws , all complete as per architectural drg and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel complete all as per specified and directed.

S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in each panel complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S&F 75 mm long butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete all as specified and directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete all as specified and directed.

S&F 100 mm long mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.

S&F 150 mm long mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws complete all as specified and directed.

S&F 100 mm long (ISI marked) mild steel barrel tower bolts stove enameled black, with bright bolt fixed with screws complete all as specified and directed.

S&F 150 mm long (ISI marked) mild steel barrel tower bolts stove enameled black, with bright bolt fixed with screws complete all as specified and directed.

S&F 250 mm long (ISI marked) mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts fixed with mild steel wood screws complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 25 mm dia curtain rod/ harrison rails,mild steel, chromium plated fancy type fixed with end brackets, stops ,rollers & all connected accessories complete all as specified and directed.

M&L in replacement 18/ 19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in shutter of cupboards/ kitchen cupboard with teak beading of all sides fixed complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in replacment 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

All as per item No. 36 above but except material complete all as specified and directed.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repair of any thickness complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F for powder coated aluminium anodised snap grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed.

S&F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on GI/Aluminium snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed

S&F 6mm thick decorative PVC Sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed

Dismantling of boarding, any description fixed in any position like wall ,wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.

S&F second class hardwood 25 mm boarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed.

Dismatling timber scantling 40 sqcm and above in any position ,unframed work complete all as specified and directed

M&L second class hard wood as in scantling clean sawn as in floor/ roof/ truss/ purlin & similar work of any description in framed work complete all as specified and directed.

Demolition of brick masonry/ precast block/ stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4 Type B1, (20mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to rough finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and directed.

M&L for light shade polished vitrified ceramic tiles 9 to10 mm thick (Square / rectangular)area of each tiles not exceeding 0.36 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the colour tiles complete all as specified and directed.

M&L for light shade polished vitrified ceramic tiles 9 to10 mm thick (Square / rectangular)area of each tile not exceeding 0.36 sqm as in skirting etc laid over and including 10mm thick plaster in CM 1:4, jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-2 (using 40mm graded aggregate) as in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in hardstanding, path, flooring surface finished even & smooth using extra cement complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) in sub base to floors and paving etc complete all as specified and directed.

M&L for chequered cement concrete tiles 25mm thick with mixture of grey cement and pigment in reqd proportion, set,area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, jointed and pointed in near cement slurry in floors including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in coping/ kerb/ side of chequered tiling etc. including weathering and throating including necessary form work etc. complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded, pointed in mortar etc complete all as specified and directed.

M&L machine cut Kota stone slab flooring 20 – 25mm thick over and including 20 mm thick screed base in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L black granite (of any type) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including nosing where reqd in cooking platforms/ wall /slab /platform and like complete all as specified and directed.

Dismantling mild steel or wrought iron work in roof trusses, gratings etc and similar work complete all as specified and directed.

M&L for mild steel work in roof trusses,purlins, rafters, wind ties, crane gantries, posts, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat sections) including distance pieces, cleats etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed self tapping screws complete all as specified and directed.

All as per item No. 71 above but except sheeting (any thickness) complete all as specified and directed .

All as per item No. 72 above but except sheeting (any thickness) complete all as specified and directed .

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with ‘L’ type or ‘J’ type or cranked hook bolts with bitumen washer in roof or wall and making good complete all as specified and directed.

Taking down cement/ lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and directed

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even and smooth without extra cement on internal wall surface complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even and smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete all as specified and directed. Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws complete all as specified and directed.

All as per item No. 83 above but except sheeting (any thickness) complete all as specified and directed .

S&F 0.63mm thick mild steel plain sheeting, galvanised, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/nainital pattern Complete all as specified and directed.

All as per item No. 85 above but except sheeting (any thickness) complete all as specified and directed .

Refixing only old ceiling including framework/grid of any type and size complete all as specified and directed .

Labour for stripping out old tar felt over roofs,parapets,chimney stacks etc as laid horizontally or vertically and removing the debries to a distance not exceeding 250 m complete all as specified and directed .

M&L for brushing neat cement slurry with 3 kg of cement per sq. metre complete all as specified and directed .

M&L for cutting out cracks to "V" section in existing roofs or terrace, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Supplying and laying APP based modified water proofing polymeric membrane, reinforcemed with nonwoven polyster non wove fabric matt (weight not less than 150 gms/sqm) of minimum 3 mm thick and minimum weighing not less than 3 kg/sqm,laid over bituminous primer conforming to IS 3384-1965 @.30 KG/SQM to be applied on prepared surface and apply a coat of bitumen 85/25 grade @1.2 kg/sqm over primer, 15mm thick plastered sufaces layer in CM 1:4 with water proofing compound (WPC) @ 3% by weight on concrete surface roof / parapet, over lap of minimum 75 mm on longitudinal direction and 100 mm on the transverse direction by thermo-fused torch flame application method complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed.

M&L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/ backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and directed.

M&L for non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x450mmx7mm thick on wall/ vertical surfaces such as skirting, dados and riser to steps etc including laid over 10mm thick 1:4 cement mortar for laying wall/ vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles 200x300mmx7mm thick on wall/ vertical surfaces such as skirting, dados and riser to steps etc including laid over 10mm thick 1:4 cement mortar for laying wall/vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in copings, platform, kerbs etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and directed.

S&F in repair asbestos cement pipes 50 mm dia of bore in any length with cement joints, fixed on walls or floors complete all as specified and directed.

S&F PVC (SWR) plain bend 110 mm dia, of any redius with rubber ring joints complete all as specified and directed.

S&F PVC (SWR) plain bend 75 mm dia, of any redius with rubber ring joints complete all as specified and directed.

S&F AC plain bend 50 mm dia, of any radius complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

S&F 20 mm bore galvanized steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line complete all as specified and directed.

Dismantling PVC water tanks and removing from site capacity for exc 250 ltrs but n. exc 500 ltrs complete all as specified and directed.

Dismantling PVC water tanks and removing from site capacity for exc 500 ltrs but n. exc 1000 ltrs complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tank 500 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as specified and directed.

M&L for rotational moulded polyethylene water storage tank 1000 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as specified and directed.

S&F 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic vavle screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed.

S&F in repair 15mm bore ball valve/float valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15mm dia (min wt 142 grms) complete all as specified and directed.

S&F in repair 20mm bore ball valve/ float valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 grms) complete all as specified and directed.

M&L for sunken floor treatment as under:- (i) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed, the defective portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage/ seepage/ dampness is eliminated. (ii) Demolition of cement concrete of any description and in any position not otherwise specifically provided for in any type of filling in sunken portion & cleaned the sunken potion including vertical wall surface complete all as directed. (iii)Laying of 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Vertical sides shall be plastered in CM (1:3), 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed. (iv) After laying sewage/ plumbing pipes with fixtures in position, 2 coats of OMIPLAS EP-101 epoxy compound shall be applied complete all as specified and directed. (v) Testing again of water tightness by ponding for 72 hours & rectifying defects if any till total elimination of defects complete all as specified and directed. (vi) M&L to fill the sunken floor with PCC ( 1:5:10) type E-2 using 40mm graded brick aggregate over the treated surface complete all as specified and directed. (vii) Provinding spouts of 25mm dia GI pipe light grade projecting 450mm from clear outer suraface of wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, including cutting holes and making good if needed complete all as specified and directed.

S&F bituminous super flash strip 1.5mm thick on roof sheets any type and pattern to seal the holes (leakage/ seepage) by applying hot application, sectional area of strip exc. 50 Sqcm but not exc. 100 Sqcm for each hole complete all as specified and directed.

S&F in repair white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover, trap,all reqd accessories (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and directed.

S&F in repair flushing cistern 10Ltr capacity PVC valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified and directed.

S&F in repair brass CP stop valve/ Angle valve 15 mm fancy type with long shank and cup fixed complete all as specified and directed.

S&F for PVC connection 15mm size with brass nuts of length 450mm complete all as specified and directed.

KUMAON VALLEY CONSTRUCTION

aditya construction