Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹12.7 L+₹90,755.50 (7.71%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹14.9 L+₹3.1 L (26.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
REPAIR AND REPLACEMENT OF JOINERY WORKS DOORS WINDOWS AND ALL ITS CONNECTED WORKS IN ZONE II AT MIL STN SAMBA
2023_MES_602707_1
GE/SMB/T-29/2023-24
Open Tender
Civil Works
Item Rate
180 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹30,000
Yes
22 Aug 2023
16 Jun 2023
17 Jul 2023
16 Jun 2023
15 Jul 2023
1 Jul 2023
16 Jun 2023 - 19 Jun 2023
Amount
Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed . NOTE- Work will be carried out upto 3rd storey of bldgs also as per direction of Engr-in-charge including necessary scaffolding required as per site conditions & no extra payment shall be made on this account.
Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Rendering 5 mm thick on concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement , complete all as specified and directed .
Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
Non-skid digital coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint less) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed
Non-skid digital Coloured ceramic joint less tiles (1st quality) 7 to 8 mm thick(square/rectangular joint in vertical surfaces dado/skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screwed bed of 10 mm thick in CM 1:4, complete all as specified and directed
Glazed coloured digital ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x300x7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .
Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed
Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , polished in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall 10 mm thick in CM 1:4, complete all as specified and directed
Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed
Light shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering on brick or concrete surface of wall 10 mm thick screed bed in CM 1:4, complete all as specified and directed
Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed .
Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed .
Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks,complete all as specified and as directed.
Brick work with sub class 'B' burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed .
PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks etc complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.
Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .
2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .
Flush shutters 30 mm thick solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.
Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
Factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with partical board core with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & back face to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification and drawings.
Double shutter Box type steel windows comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed including 10mm square bars as in grill complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
Double shutter Box type steel ventilators comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel ventilators will be double shutter external glazed and internal wire glazed including 10mm square bars as in grill complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete all as specified and directed.
Anodised aluminium deco grills, 6mm dia mesh size 100x100 mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified.
Repairs to steel window, ventilators of any size to make it functional (including slot pin, hinge, hook and eye of standard quality where required), resecuring of windows wire gauge and railings/grills by using welding equipments, complete all as specified and directed.
Repair/ easing of wooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc complete all as specified and directed.
Repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable , complete all as specified and directed..
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.complete all as specified and directed.
3.5 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and directed. Make : Saint Gobain, Modi Float, Triveni Float Glass
3.5 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and directed. Make : Saint Gobain, Modi Float, Triveni Float Glass
Securing glass of any description in existing wooden and iron frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work ( New length of frame reputtied shall be measured.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.complete all as specified and directed.
Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and directed.
Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)
Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified. (ISI Marked)
Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
Hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.complete all as specified and directed.
Aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.
50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.
Aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door, fixed in repair, complete all as specified.
Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work, fixed in repair, complete all as specified and directed.
Aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters upto 700mm in width and of weight not more than 35kg and fixed in repair, complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repair, complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm including complete accessories, fixed in repair, complete all as specified. Make:- Links Locks/ Godrej
25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of wall care putty and one coat of primer complete all as specified.
Preparation of new plastered/ concrete surfaces of and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed.
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto four storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying one coat of lime white wash complete all as specified and directed.
Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash, complete all as specified and directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Preparation of old decorated surfaces including brooming down of steel wire scrapping down smoke root moulds moss and efflorencet salts and trading oil and grasy spots etc. and applying one coat oil bound distemper on decorated old plastered or un-plastered surface in ceiling all as specified.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of interior emulsion including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of interior emulsion over and including one coat of primer over and including two coats of Birla wall care putty on plastered surfaces, preparatory to distempering. complete all as specified and as directed by Engineer-in-charge.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint (upto 2nd storey with necessary scaffolding complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion (APEX) making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed.
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description ( up to 2nd storey with necessary scaffolding) complete all as specified and directed
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S RAMESHWAR ENGINEERS & BUILDERS
M/S NAGAR BUILDERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .