WATER SUPPLY

Supply and Delivery of 22KW/30HP 3PH Insuction Motors-Foot Mounted(B3) Enclosure confirming to protection IP 55 continuosly rated (S1) suitable for opertaion on 415+/- 10% V,3phase 50Hz+/- 5% AC supply with amnient 450 with class F insulation and altitude less than 1000m above m.s.I. Efficiency values are conforming to IS12615/IS/IEC 60034-IE2 Efficiency. Make: CROMPTON

Supply and Delivery of KIRLOSKAR make Horizontal Centrifugal Split casing pump of type:UP100/35, (Flow = 94m3/hr head = 38mtrs) Suc X Del = 150 X 100mm of CI Impellor Gland pack pump coupled to 22KW/30HP-1440 RPM CGL (IE2) mounted on a common base frame including coupling, coupling guard.

Supply and Transportation of 7.5 HP 05 to 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Supply and Transportation of 5 HP 12 to 16 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Supply and Transportation of 3 HP 5 to 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Supply of 3 Core 2.50 Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: As per list of recommended brands as category I

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs /CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes: As per list of recommended brands

Supply and delivery of 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Dy Executive Engineer

Venkatagiri Municipality