Loading…
Loading…
Tender Value
₹14.3 L
EMD Value
₹35,800
Closing Date
9 Sept 2026, 3:00 pm
Divisional Engineer-(Elec-I), Tirupati
tpty
AME for Preparation of ornamental designs for use in Sri PAT & SSKM sections for the year 2026-27.
980399
144/DE(Elec.)-I/TTD/TPT/2026-27
OPEN - NCB
Electrical Works
TIRUPATHI
7 documents required · 7 mandatory
₹507
₹35,800
25 Aug 2026
25 Aug 2026
25 Aug 2026
Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design.
1. Welding Machine Should be Provided by the Fabricator at his own cost.
2. Necessary power supply will be given by Department at free of cost.
3.Welding rods will be supplied by departmentally at free of cost.
4. The above rates excluding GST
Fabrication charges for providing necessary back support with 8mm/ 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design.
1. Welding Machine Should be Provided by the Fabricator at his own cost.
2. Necessary power supply will be given by Department at free of cost.
3.Welding rods will be supplied by departmentally at free of cost.
4. The above rates excluding GST
Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution.
1. Welding Machine Should be Provided by the Fabricator at his own cost.
2. Necessary power supply will be given by Department at free of cost.
3.Welding rods will be supplied by departmentally at free of cost.
4. The above rates excluding GST.
Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally).
Supply of Red oxide primer paint for iron works Grade-I.
Supply of ready mixed synthetic Enamel paints in all shades Gr-II having having VOC(Volatile organic compound content lesss than 50gms/lit.
Supply of 6 & 8 mm M.S.Steel
Supply of 4/5mm LED Pixel serial sets consisting of 50 to 60 Nos of lamps with 6" span bulb to bulb (copper wires) and operated at 220V, 50Hz, AC supply. Colours: Green, Red, Blue, Yellow and white.
Supply of 21 SWG Enamel coated Aluminium winding wire .
Supply of 1.0 Sqmm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable.
Makes: Finolex / RR kabel / Havells/Finecab/ KEI/ Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi).
Supply of Man Mazdoors
Supply of 7/20 Standard G.I Wire
Supply of welding Electrodes 4 mm dia
Preparation and Supply of good quality LED 12mm pixel lamp including holder single colour serial sets consisting of 50 Nos. of LED bulbs duly cutting the wires from bulb to bulb 8'' lenth gap and soldering the LED Lamps etc., the work includes LED lamps with holder, hook up wire but without SMPS etc., complete
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
144 ornamental desings.doc
TENDER_DOCUMENT • 2.01 MB
144 BOQ.xls
TENDER_DOCUMENT • 2.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].