Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 05 KUKROOSA HANDWARA KUPWARA KUPWARA JAMMU KASHMIR 193224 | KUPWARA | JAMMU AND KASHMIR | 193224 | Admitted-Finance |
Tender Value
₹29.9 L
EMD Value
₹59,780
Closing Date
15 Dec 2023, 4:30 pmClosed
PEK
Sanat Ghar Bemina
Construction of lavatory block for Craft Community Centre and including of main gate at Asham Bandipora
2023_SICOP_238224_1
61-PEK of 2023-24 dated 25-11-2023
Open Tender
Civil Works
Item Rate
45 days
Asham Bandipora
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
PEK
₹59,780
20 Dec 2023
25 Nov 2023
16 Dec 2023
25 Nov 2023
15 Dec 2023
25 Nov 2023
Amount
Dismantling of brick work manually/mechanically including stacking of serviceable material and disposal as directed at site( in cement mortar)
Demolishing stone rubble masonary manually/ mechanically including stcking and disposal of unserviceable material within as directed at site ( in cement mortar)
Earthwork in excavation by mechanical means in trenches for foundation, drains, pipes, cables etxc (not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr for cutting edge, disposed earth to be leveled and neatly dressed in all kind of soil.
Providing and laying of stone soiling hand packed tightly including ramming &all carriage complete
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:4:8 mix (1 Cement :4 coarse sand :8 graded stone agg.40mm Normal Size) using crushed agg. Including all leads, lifts and all carriages. Upto site of work complete.
Providing and laying of reinforced cement concrete of specified grade excluding the cost of centering and shuttering all work upto floor V-level in 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg.20mm normal size) using crushed agg. Including all carriages upto site of work complete.
Providing and laying reinforced cement concrete of specified grade excluding the cost of reinforcement, centering and shuttering all work upto plinth level in 1:2:4 mix (1 Cement :2 coarse sand :4 graded stone agg.20mm Nomial Size) using crushed agg. Including all leads, lifts and all carriages. Upto site of work complete.
Centering shuttering strutting propping etc, and removal of same in foundation, suspended floors etc.
Providing and laying of Kahk Bajri/boulders in layers including all carriages complete job
Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:6 mix (1 cement :6 fine sand) including cost of all carriages mechanically / manually complete job
Bricks available at site
Providing and laying of 50mm thick cement concrete flooring using 1:2:4 cement concrete with 50mm thick, 20mm nomial size stone agg. & Finished with a flooring coat of neat cement slurry including all carriages complete
Applying 12mm thick cement plaster on the rough side of brick wall in (1:6) cement sand mix.
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete (Thermo-mechanically treated bars).
Providing/ laying of wood work in frames of doors, windows, clerestory windows and other frames wrought frames and fixed in position of 2nd class kail wood.
P/F of 35mm thick paneled glazed shutters for doors, windows etc including 12mm laminated board, glass panes,hinges, screws etc of 1st class kail wood complete job.
P/F of 35mm thick wire guaze shutters using galvanized MS wire guaze of average width for aperture 1.4mm in both directions with wire or dia 0.63 mm for doors, windows and clerestory windows including ISI marked MS presses but hinges bright finished of required size with necessary screws of 1st class kail wood complete
P/F Ceramic glazedr tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (! cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.
Providing and fixing wood work in trusses, posts plates in 1st class popular wood.
P/F Track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35 mm high crests at 250 to 255mm T.C.T (total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 No stiffing ribs, effective water shedding and special male/ female ends with full return legs on side Lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of Zinc and aluminum (150gms/sm) zinc/ aluminum coated mass total on both sides AZ-150 as IS-1397, 550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M.P over micron polyester back coat over 5 micron primer coats on both surfaces including side and end lapp and using 8mm Galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end lappsetc (measured for unit of laid area 0.55mm thick)
Providing colour coated sheet ridges or hips of with 60cm over all with plain GS sheet fixed with polymer coated J or L hooks, bolts, nuts 8mm dia GI limpet and bitumen washers complete (0.63mm) thick with zinc coating not less than 275 gms/spm (0.55mm thick).
Providing and fixing of eaves boarding for 1st class kail wood (300x400) with necessary grooves and chamber including cost of nail/screws etc
Providing and fixing of 12mm thick Nordic pine wood paneling including C/O budloo wood jamp work 2”x1 ½”, 12mm thick plywood and polishing complete
Painting with synthetic enamel paint of approve brand and manufacture to give an even shade two or more coats including with ready mixed of approved brand and including priming coat complete in all respects
Structural steel work welded in built up sections in gates and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete including painting.
Providing and laying fine chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing
Moulding / cornice
Providing and fixing of PPR Fittings standard make 1. 32mm dia
25mm dia
Union 32mm dia
Uniom 25mm dia
Providing and fixing PVC fittings a. 4” PVC Pipe
3” PVC Pipe
4” collar
4” P-bend
3” collar
3” P-Bend
Water storage tank (5 layers)
Gas Cowel
Providing and fixing of C.P fittings (Jaguar or equivalant Make) a. Long nose Bib cock
P/F W.C Europian type seat lid 10 ltr low level white flushing cistern complete job(one piece)
P/F wash basin with pedestal
Waste pipe
Mirror 1500 x 450 mm
Wall mixer
Basin Mixer
Angle Value
C.P connections 24”
Soap Case
Heath fuset
Indian W.C
10 ltr PVC Cistern
C.P Rod
Gyser 50 ltr (venus/Racold or equalent)
P/F of Electric Fittings of standard make (Havels or equalent) Lighting points: 1. Wiring for the following light points with 1.5Sqm PVC insulated copper conductor 1100 vilts grade standard flexible FR wires of approved make in existing concealed or surface mounted conduit including providing and fixing of 6 Amp single pole switch of approved quality, colour make and design in 1.6mm thick GI box and earthing of fixtures and the outlets with 1.5Sqm PVC insulated copper conductor. (including dismantling as required)
Heating point: Wiring for heating point with 2x2.5 Sq mm copper conductor including cost of 16 Amp switch and socket complete as required.
SITC of 250-300 mm Sweep Shutter type Exhaust fan of USHA/ Crompton make making of necessary connections.
surface light: Supplying installing testing and commissioning of 9 Watt Led lights complete with connection as required
Supplying and fixing of DB box for MCB,s
MCB’s single pole
MCB’s double pole 40 amp
Supplying and laying 7/16 Service line
Providing and fixing of Hardware fittings 1. Tower Bolt 4”
Tower bolt 6”
Haldaraz
L-Drop 12”
I-Hook 12”
Construction of mainhole chamber 2’x2’x2’ of brick masanory in (1:6) mix including 15mm cement plaster in (1:4) mix including mainhole cover a) 2’-0” x 2’-0”
Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm normal size well rammed & consolidated & grouted with fine sand including finishing the top smooth.
P/L of pre cast cement concrete rings for soakage pit
Covers (R.C.C)
M/S HB CONSTRUCTIONS
M/S WANI CONSTRUCTIONS AND CO
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .