Making a guard room and allied electrification works at Departmental Store Area under Easter Mechanical Sub-division-III under Eastern Mechanical Division in the District of Nadia.

Amount

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared)(Store Surrounding areas)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) .a) Do- by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.(in foundation +floor of the room)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.((i) Pakur Variety.)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.((i) Pakur Variety.)

Brick work with 1st class bricks in cement mortar (1:6)

In foundation and plinth

In superstructure, ground floor.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work).(ii) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.( For works in foundation and upto roof of ground floor/upto 4 m) (a) For works in foundation, basement and upto roof of ground floor/upto 4 m II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)

With 1:6 cement mortar 20 mm thick plaster

15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). With 0.5 mm thick sheet

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.(for 1 no door and 2 nos windows)

Carrying the MS door and windows from workshop to work site including loading, unloading and stacking at site (Dist aprox-20 km)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) ii) Solvent based interior grade Acrylic Primer ( Two Coats.)

Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface :

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] ii)Average run 5 mtr

Supply and delivery of the following materials at site

Street light luminaire with 45W LED light set (Make-Philips/ Equivalent type of approved make

Supplying and fixing 240V, 10A DP MCB of Breaking capacity 10 kA & B characteristics on din rail of existing DB (DB for Generator) and necessary connection complete (Make - Havells/Approved make).

20 watt LED Tube light set,240 V AC(Make-Philips/ Equivalent type of approved make

9 watt LED Tube bulb,240 V AC(Make-Philips/ Equivalent type of approved make

12 mm Ceiling fan,240 V AC(Make-Havells/ Equivalent type of approved make

Fitting & fixing of above 40W LED set with 40 mm dia. 1.5 mtr long (Medium duty) G.I pipe bracket fixed on the roof of the pump house with proper grouting /clamping including making power connection by 2x1.5 sqmm FR grade copper wire through PVC pipe/flexible pipe with drawing ECC (1.5 sqmm copper wire) including drawal of power from existing control panel with all complete as per direction of EIC. This cost is inclusive of fitting & fixing of LED bulbs as cited above.

Add: GST @ 18%

Add: LW Cess @ 1%

MA ANNAPURNA ENTERPRISE (BID ID -6185446)

BISALAXMI ENTERPRISE (BID ID -6185431)