REPAIR AND POLISHING OF STEEL FURNITURE OF VARIOUS STN UNDER GE 969 EWS

Amount

S&F for CP handle of size 150mm long for Almirah large /Med steel/ Almirah steel with mirror double shutter with shelves and almirah glazed steel including removing old u/s handle as specified , FD-1031, FD-1032, FD-104, CESZ-415.

S&F locks 6 lever as approved for almirah large steel, med steel, almirah glazed steel & Almirah double shutter including removing old locks as specified, FD-1031, FD-1032, FD-104, CESZ-415.

S&F for 3 way locking device to Almirah large steel/Almirah double shutter and taking down of U/S existing one as specified and directed incl provn of locking device cover, FD-1031, FD-1032, FD-104, CESZ-415.

All as per item No 03 above but for Almirah Med steel, FD-1032.

S&F shelves made out of 1.00 mm thick MS PBI sheet for almirah large steel with shelves including removing old U/S shelves all as specified , FD-1031, FD-104.

All as per item No 05 above but for almirah double shutter with mirror steel with shelves,CESZ-415.

All as per item No 05 above but for almirah med steel with shelves, FD-1032, FD-67.

All as per item No 05 above but for Locker Bed Side steel with shelves, FD-257.

S&F legs made out of 1 mm thick MS sheet for almirah large steel/ Almirah double shutter with shelves including removing old U/S legs all as specified, FD1031, FD-104, CESZ-415.

All as per item No 09 above but for almirah med steel with shelves, FD-1032

All as per item No 09 above but for Locker Bed Side steel with shelves, FD-257

S&F hinges of size 75mm (ISI Marked) for the shutters of almirah large/Almirah double shutter /medium steel/Locker Bed Side Steel including removing old U/S hinges all as specified, FD-1031, FD-1032, FD-257, CESZ-415.

M&L for removing UNSV cleat from shelves of Almirah large/ Med steel and fixing the existing shelves by welding (Welding shall be done on four corners of the existing shelves) of Almirah large / Med steel all as specified, FD-1031, FD-1032, FD-104.

S&F hasp & stapple of size 100mm for the shutters of Locker Bed Side Steel including removing old U/S Hasp & Stapple all as specified and directed, FD-257.

S&F handle of size 150 mm for the shutters of Locker Bed Side Steel including removing old U/S handle all as specified and directed, FD-257.

S&F curtain rod of size 25mm dia of wall thickness 1.6mm for Locker Bed Side Steel/Almirah Double Shutter with mirror including removing old U/S curtain rod all as specified and directed, FD-257, CESZ-415.

S&F mirror of appopriate size and 5mm thick for Almirah Double Shutter Steet including removing old U/S mirror all as specified CESZ-415. Make:- Modi Guard/ Saint Govind/ Gold fish.

M & L for removing old paint/dents of almirah large steel with shelves including removing bends and preparation of surface for painting by putty work to smoothening the surface and machine spray painting to complete Almirah large steel with shelves with two coats of synthetic enamel paints OG/Hammer tone finish/ approved shade 1st grade inside and out side over a coat of red oxide primer all as specified, FD-1031, FD-104.

All as per item No 18 above but for Almirah double shutter with mirror steel, CESZ-415.

All as per item No 18 above but for Almirah Med steel, FD-1032, FD-67.

All as per item No 18 above but for Locker Bed Side Steel, FD-257.

Tightening the charpoy GI pipe frame after removing the U/S nylon newar incl U/S long rails/ short rails /check nut /Elbow GI wherever found U/S and fixing new parts as specified in the drgs. FD-220(M).

Tightening the charpoy GI pipe frame after removing the U/S Plywood Top incl U/S long rails/short rails/stiffener/check nut/Elbow GI wherever found U/S and fixing only new parts as directed and specified in the drgs., FD-220(M).

S&F in repairs for GI tubing 32mm dia Medium grade threading upto 22mm at one end and 40mm at other end for long rail as per size shown on drg suitable for elbow 32mm 3way, FD-220(M) and as directed by Engr-in-charge.Make TATA/Prakash Surya/Jindal.

Cutting out two short rails from old long rails( Item No-24 above) threading at one side 40mm at other side for short rail 22mm length all as shown on drg and directed by Engr-in-charge, FD-220(M)

Cutting of old short rails ( Item No-25 above)into two legs for charpoy GI pipe and threading upto 22 mm length to fit well in to GI Elbow 32mm 3 way dia all as shown on drgs, FD-220(M)

S&F in repairs GI Elbow 32mm dia 3way ISI Marked minimum weight not less than 400 gms each, FD-220(M)

S&F in repairs GI Checknut 32mm dia ,10mm thick standard quality ISI Marked as shown on drgs , FD-220(M).

S&F in repairs GI Flat Iron of size 870mmx40mmx6mm standard quality ISI Marked for stiffener , FD-220(M)

S&F MS clamp of suitable size ,02 Nos each leg duly welded and painting with two coats of synthetic enamel paint (black) over a coat of red oxide primer including removing existing U/S clamp all as specified and shown on drgs, FD-220(M).

Removing U/S nylon newar from charpoy GI pipe and fixing of new plywood 12mm thick make Kitply/National/Green ply. Complete all as specified and directed by Engineer-In-Charge. FD-220 (M)

S&F of Charpoy Gl pipe with new plywood BWR Grade of size 7' x 3' x 12mm thick with suitable size nuts, bolt & washers, complete all as specified and directed. Make : Green ply/Kit ply/ Century, FD-220 (M)

S&F lock 6 lever as approved of suitable size for table office Offrs/Clks/Asst/Typist Steel including removing U/S lock. Make : Godrej/Harison/Link lock , FD-1003 ,FD-1004.

S&F PVC recessed handles incl 1mm thick MS steel cover to the existing drawers of table office Clk/Offrs steel incl removing U/S handles all as directed, FD-1003,FD-1004.

S&F table top made out of 18mm pre laminated partical board exterior grade incl 4mm thick Teak wood edging all around the top for table office clerk steel including removing U/S table top as directed & specified. ( TW edging shall be french polish to give a glossy finish.), FD-307, FD-1004, FD-84.

All as per item No 35 above but for table top for table office offrs steel as specified and directed in the drg, FD-1003, FD-84.

Complete removal of old paint/dents of Table office officer steel and preparation of surface for painting by putty work to smoothening the surface two coats synthetic enamel paint OG/Hammer tone finish/approved shade of 1st grade shall be painted by machine spray over a coat of red oxide primer to table office officer steel , complete all as directed by Engr-In-Charge, FD-1003, FD-84

All as per item No 37 herein before but for table office Clk steel, FD-307, FD-1004,FD-84.

Removing U/S seat and back from chair CB steel with arms incl U/S legs, stiffener and fixing the new parts with welding, screwed, bolt & nuts and washer all as specified and directed as shown on drg. (Note:- Seat & back , conduit pipe , FI strips shall be measured as only under relevent items. FI strips shall be fixed two Nos in each seat and back frame), FD-75(M).

All as per items Nos 39 above but for Chair CB steel W/O arms, FD-75(M)

S&F in repairs seat frame for Chair CB Steel with Arms made out of hard wood ( Teak/ Seasom) duly caned with 2 mm plastic cane oval shape and border with 4mm plastic cane duly finish with black polish upto glossy finish all as directed, FD-75(M).

All as per item No 41 above but for back of chair CB steel with arms, FD-75(M).

All as per item No 41 above but for seat of chair CB steel without arms, FD-75(M).

All as per item No 41 above but for back of chair CB steel without arms, FD-75(M).

S&F in repairs FI strips of size 500mm x 20mm x 4 mm for chair CB steel with arms/without arms, FD-75(M)

S&F new hand rest made out of Hard Wood ( teak/seasom) to the existing chairs CB steel with arms and black polish incl removing U/S hand rest FD-75(M).

Removing of old paint by scraping from steel surface duly dent/bent from Chair CB steel with arms and preparation of surface for painting by putty work to smoothening the surface and spray painting to complete steel surface with two coats of synthetic enamel paint 1st grade OG/ Hammer tone finish/approved shade completely over a coat of red oxide primer, FD-75(M)

All as per item No 47 herein before but for Chair CB steel W/O arms, FD-75(M)

Taking down the following UNSV parts from various type Chair Computer/Chair revolving high back/Chair excutive with arms/Chair visitor and Fixing new parts made out from existing size/shape in proper position to bring the chairs in original position/ functional (items obtained from Item No-50 to 53 below).,TP. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC Costrol (Wheel).

S&F in repairs Hydrolic system, TP.

S&F in repairs PU Arms , TP.

S&F in repairs Legs (Complete legs of Chair Revolving) , TP.

Taking down the UNSV seat from various type of Chair Computer/Chair revolving high back/Chair excutive with arms/chair visitor and S&F new one of existing size/shape made out of 40 density foam sleep well duly covered with approved rexine cloth , TP.

All as per item No 54 above but for back of various type of Chair Computer/Chair revolving high back/chair excutive with Arms/chair visitor, TP

M&L for removing U/S plastic cane 4mm thick from the chair verandah and removing the dent incls welding of broken joints & preparation of surface for painting by putty work to smoothening the surface and spray painting to complete with two coats of synthetic enamel paint white over a coat of red oxide primer, FD-256, FD-359.

M&L for recanning of the existing chair verandah with 4mm thick half round oval shape plastic cane good quality as per existing pattern all as specified & directed by Engr-in-charge, FD-256, FD-359

S&F 04 Nos PVC rubber shoes to the legs of chair Verandah including removing of old U/S rubber shoes, FD-256, FD-359.

Removing U/S seat from Form without back incl U/S legs, stiffeners wherever found U/S and Fixing new parts such as seat plank and square tubing with welding,nut and bolts all as specified or shown on drg. , FD-77(M)

S&F in repairs SAL/Seasom hard wood seat plank 1800mmx250mmx25mm thick for Form without back, FD-77(M).

Removing U/S seat and back from Form with back incl U/S legs, stiffener and fixing new parts such as seat and back plank and 25 mm sqaure tubing with welding,screwed,bolt & nuts as directed and specified and shown on drg. , FD-78(M)

S&F in repairs SAL/Seasom hard wood plank for seat size 1800mmx255mmx25mm thick for form with back, FD-78(M).

S&F in repairs SAL/Seasom hard wood plank for Back size 1800mmx150mmx25mm thick for form with back, FD-78(M).

S&F in repairs 25mm sq tube (1mm) for Form without back/ with back ,Complete all as specified.

Removing of old paint by scraping from steel surface duly dent/bent from Form with back and preparation of surface for painting by putty work to smoothening the surface and spray painting to complete, steel surface with two coats of synthetic enamel paint 1st grade OG/ Hammer tone finish/approved shade and make completely over a coat of red oxide primer, FD-78(M).

All as per item No 65 herein before but for Form W/O Back, FD-77(M).

Tightening only of charpoy double Bunk steel ply top after removing the U/S Plywood Top incl U/S nut & bolts and fixing only new parts/ply top supplied under Item of Sch 'A' alongwith nut,bolts&washers ,complete all specified and as directed. (CESZ/SK/417/5.

S&F in repairs new plywood BWR Grade of size 7' x 3' x 12mm thick with suitable nut, bolt & washers , complete all as specified or shown on Drg No.CESZ/SK/417/5. Make: Green ply /Kit ply / Century.

Removing of old paint by scraping from steel surface duly dent/bent from charpoy double Bunk steel ply top and preparation of surface for painting by putty work to smoothening the surface and spray painting to complete, steel surface with two coats of synthetic enamel paint 1st grade OG/ Hammer tone finish/approved shade completely over a coat of red oxide primer, CESZ/SK/417/5.

Removing U/S Top from Table dining ORs incl U/S legs, stiffeners wherever found U/S and Fixing new parts by welding/nut and bolts as specified in the drg. FD-165(M)

S&F in repairs Top for table dining ORs as per size specified in drgs, FD-165(M).

Removing of old paint by scraping from steel surface duly dent/bent from Table dining ORs and preparation of surface for painting by spray painting to complete steel surface with two coats of synthetic enamel paint 1st grade OG/Black/approved shade completely over a coat of red oxide primer, FD-165(M).

Removing U/S Top from Desk 4'-6" and S&F new Desk Top to the existing Desk 4'-6" made out of 18/19mm pre-laminated particle board exterior grade as specified in drg, FD-107(M).

All as per items No 73 above but for Desk 4'-6", FD-107 (M)

Removing U/S shelves from Rack steel Adjustable with shelves and and S&F new shelves to the existing Rack steel made out 1.00mm thick MS black steel as specified on drg. Shelves shall be painted both side two coats of synthetic enamel paint OG/ Hammer tone over a coat of red oxide primer.FD-106(M), FD-129 ,FD-106.

Removing dents of Rack Steel Adjustable with shelves including preparation of surface for painting by putty work to smoothening the surface and spray painting to complete Rack steel with shelves with two coats of synthetic enamel paints OG/Hammer tone finish/ approved shade inside and out side completely over a coat of red oxide primer or as directed by Engineer-In-Charge.

Note:- Schedule of credit Rs.17,894.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

ALI MOHD NAJAR

DUKE CONSTRUCTION

M/S GHULAM NABI KHUROO AND CO

M/S PARADISE TRADERS AND CO

M/S GHULAM RASOOL LONE AND SONS