Repair to Joinery, flooring, ceiling, sanitary fittings, plastering, approach path, drain and internal electrification of OTM Accn in Anarwala under AGE B/R-I of GE Dehradun.

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc, but except bricks complete all as specified and directed.

Material and labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed

Material and labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6, but except stones complete all as specified and directed.

Material and labour for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour 15 mm thick rendering in cement mortar 1:4 on fair/ unfair faces of brick work or concrete surface, surface finished even and fair with water proofing compound complete all as specified & directed by Engineer-in Charge (WPC will be measured and paid separately).

Material and labour 10 mm thick plastering on ceiling surfaces in CM (1:3) even and smooth without using extra cement complete all as specified & directed.

Material and labour rendering 15 mm thick on cement mortar 1:6 finished fair/ unfair faces of brick work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound of cement finished fair faces of concrete surfaces, chajja/ facia even and fair without using extra cement complete all as specified and directed. (WPC will be measured and paid separately).

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, chajjas and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.complete all as specified and directed.

Material and labour for preparation of wall and applying interior grade wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour one coat of oil bound distemper in any tint on surfaces of walls including preparation complete all as specified in SSR Part I and directed by Engr-in-Charge

Material and labour for preparation of old decorated surfaces of walls and applying two coats oil bound distemper any tint complete all as specified in SSR Part I and directed by Engr-in-Charge.

Material and labour for preparation of old decorated surfaces of walls and applying two coats of cement base paint any tint complete all as specified and directed Engr-in-Charge.

Material and labour one coat of cement base paint in any tint on surfaces of walls including preparation complete all as specified in SSR Part I and directed by Engr-in-Charge

Material and labour preparation of old decorated surfaces of wall, pillasters, cornices, AC sheet etc. by washing, rubbing down & scrapping with steel wire brass, emrypaper, steel plate etc and applying one coat of exterior emulsion paint complete all as specified and directed.

Material and labour for one coat of white wash on of walls including preparation of surfaces complete all as specified and directed by Egnr-in-Charge.

Material and labour for one coat of white wash on ceiling including preparation of surfaces complete all as specified and directed by Egnr-in-Charge.

Material and labour for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of suitable primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of exterior emulsion paint over a coat of putty 1-1.5 mm thick finished the surface even and smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

Material and labour for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (d) Supply and providing APP based polymeric water proofing memberane 3 mm thick of weight not less than 3.00 Kg/ Sqm. (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (f) Material and labour for PCC 1:5:10 complete mixed with brick bats 40 mm size. (g) Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth as specified.

Material and labour PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling, mass concrete, sub base or leveling course of floor etc complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in leveling course to floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and labour non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete.

As per item No 33 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:6 complete all as specified and directed.

Material and labour double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 36.00 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed.

Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified and directed.

Material and labour 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. for forming fair finished surfaces of drain or channel complete all as specified and directed.

Material and labour 18 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Material and labour for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:6 complete all as specified and directed.

Material and labour for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc. 1 Sqm complete all as specified and directed.

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2.0 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the frame complete all as specified and directed.

Supply and fix 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

Supply and fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge.

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:3:6 type C0 ( 12.5 mm stone aggregate) complete all as specified and directed.

Material and labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified and directed.

Supply and fix mild steel, plain, black sheet 1.0 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified and directed.

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate including taking down old complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

Supply and fix stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and directed.

Supply and fix stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

Supply and fix stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

Supply and fix 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed.

Supply and fix in 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Material and labour applying two coats of Synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling old CGI sheet as in roof coverings complete all as specified and directed.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

Material and labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and directed.

Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed.

Supply and fix 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fix 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

Supply and fix in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

Supply and fix in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed.

Supply and fix in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Material and labour in repair 75 mm PVC spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

Supply and fix in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

Supply and fix Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.

Supply and fix in repair Brass Mortice lock, four levers vertical type, size 100 mm size complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour for demolition of existing PCC, treating of joints, filling of honey combs with using crack fill chemical of Dr Fixit or STP and providing PCC (1:2:4) type B-0 with WPC (thickness as ordered by Engineer-in-Charge) over roof surface complete all as specified and directed.

Material and labour for rendering 15 mm thick plastering in cement mortar 1:4 with WPC (If ordered by Engineer-in-Charge), complete all as specified and directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed and as per manufacturer's instructions.

Supply and fix in Repair Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as specified and directed.

Material and labour for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point/exhust fan point , controlled by one way switch.

One Ceiling fan point , controlled by one way switch through Regulaor

One bell point , controlled by bell push switch.

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

All as per Item No 113 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Material and labour for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through existing steel/PVC conduit including existing pressed steel terminal switch boxes with replacement of new 3mm thick plastic laminated sheet as top cover and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly and making good disturbed surfaces etc complete all as specified and directed by Engr.-in-charge of following. Note :(i) The wiring to be done as per IE rule and maintain colour code accordingly. (ii) Pressed steel terminal boxes for switches/sockets of any size if reqd shall be measured & paid separetely

One light point/exhaust fan point , controlled by one way switch.

One Ceiling fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on independent board

All as per Item No 115 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix for bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified and directed.

Supply and fix Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified and directed.

Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting complete all as specified and directed.

Supply and fix in replacement mirror light decorative compact luminarious with decorative ends caps 10Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement wall mounted LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fix in replacement of Decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, including suitable type of 9- 15 Watts LED Lamp complete all as specified and directed by Engineer-in-charge Make : Havells (City 1)/philips/mapro

Refixing of LED tube light fittings /LED Bulk head fittings / LED fency fittings /Lamp holder of any make or capacity carefully complete ( Its taking down from srl item no 1) all as specified and directed by Engineer-in-charge

Supply and fix in replacement of energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100 to160 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make and paid separetaly

Supply and fixing in replacement of Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fixing in replacement for Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make

Supply and fix in replacement of fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces, LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

Supply and fix ix in replacement of MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

Supply and fix ix in replacement of MCB SPN 240 Volt 10 KA 32 Amp 'C' series conforming to IS complete all as specified & directed.

Supply and fix ix in replacement of MCB SP 240 Volt 10 KA 40 Amp 'C' series conforming to IS complete all as specified & directed.

Supply and fix ix in repairs MCB 415 Volt, TPN, 10 KA 40- 63 Amp 'B' series conforming to IS complete all as specified & directed.

Supply and fixing in replacement of Distribution Box MCB Protected Socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP all as specified & directed

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing into existing conduit including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for sub main wiring with 4 Single core(R,Y,B,E Phase) PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in including 25mm or higher medium duty PVC concealed conduit/flexible conduit where reqd & all conduit accessories and fitting inclu one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire (E) upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.Note : 4 RUN Cable will be drawn in one conduit , measured per RM only.

Supply & Fixing building security light fitting LED type 45 Watt of dia-cast IP 66 aluminium housing, 45 Watt, LED 6000K lence type toughened glass having seprate surge protector 10 KV , efficiecy of minimum 100 lumens /watt, incu adobter if any , prewired complete incuding 40/32 dia GI Light grade for bracket of fitting as reqd up to 1.2 RM proper shaped , bended (120 degree) threaded & drilling holes for wire entry & MS clamps made out of flat iron of suitable size incl painting complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 16 Sqmm 4.0 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

Supply and fix 1100 volt heavy duty weather proof cable wiyh PVC insulated stranded aluminium conductor ,served with inner sheathing of PVC tape and overaii PVC Sheathed of size 16 sqmmx 2 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5m and not exceeding 1.5 m in depth for laying of electric cableand getting out in soft/loose soil, complete all as specified and directed by Engr -in-charge

Returning, filling in excavated soil , including leveling,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr -in-charge

Removing excavated material(soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above & starting point complete all as specified and directed by Engr-in-charge.

Material and labour for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

Supply and fix in repair aluminium alloy powder coated door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminium tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make Sandhu / Ritz) shutter to be partly glaze with 5 mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/ gasket, anodised aluminium beading screw complete all as specified and directed at site by Engr-in-Charge. Chowkat frame - 101.60 x 44.45 x 1.60 mm shutter verticle type - 85x44.45x1.56mm shutter middle rail - 83.50x 44.45x1.54mm shutter top rail and bottom rail - 114.30x44.45x1.55mm

Supply and fix in repair powder coated aluminium partition (fixed) made out of aluminium powder coated section 83 x 44.45 x 2 mm including 5 mm thick glass/ 10 mm thick particle board complete with rubber packing/ aluminium beading etc including dismantling of existing structure complete all as specified and directed.

Material and labour for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying in replacement of GI Steel tubing light grade 40 mm(2") dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.

M/S C S AITHANI

VERDHMAN ASSOCIATES

Saurav Enterprises

Asian Builder