SPECIAL REPAIRS TO P 88 OR 17 BUILDING AND ADDITION AND ALTERATION TO RADAR MAST IN NORTH WING OF ND SCHOOL NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets compleate all as specified and directed by Engr-in-charge.

M&L for preparing of old steel surfaces of any description over 10 cm in wisth or grith not otherwise described and applying 2 coats of anti- corresive paint over a coat of epoxy primer at any height all as specified including necessary scaffolding work upto 30m height compleate all as sfecified and directed by Engr-in-charge.

Dismantling Dismantling structural steel work including doors, gates but excluding framed truss etc compleate all as specified and directed by Engr-in-charge.

S&F for Aluminium alloy chequred plate ( 8011 grade ) as pere standard specification with five bar diamond projection on top including all necessary fittings at any height compleate all as sfecified and directed by Engr-in-charge.

S&F for rolled mild steel structural steel work Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and rivited , bolted or welded attachment confirming with Fe-410- W ( Gde E-250) quality - B compleate all as sfecified and directed by Engr-in-charge.

M&L for preparing of new steel surfaces of any description over 10 cm in wisth or grith not otherwise described and applying 2 coats of anti- corresive paint over a coat of epoxy primer at any height compleate all as sfecified and directed by Engr-in-charge.

M&L for Rolled sections (Tublar sections) as in main and cross beams, hip and jack rafters; purlins , wall framing ,where connected to common rafters and fixed with angle cleats or other connecting plates compleate all as specified and directed by Engr-in-charge.

M&L for removal of oil, dirt, laitance and other containments by manually and surface sall be fairly smooth finish. Injection of grouting of construction joints and honey combs if any with cementitious pressure grouting with 40 Psi pump using Cobex 100 or equivalent @ 225gms mixed to 50Kg bag of cement including joints packing using polymer modified mortar. Providing and applying pitch free polyurethene water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours over a substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% compleate all as specified and directed by Engr-in-charge.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as compleate all as specified and directed by Engr-in-charge.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as compleate all as specified and directed by Engr-in-charge.

S&F 180 mm dia of half round ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/ MS clips etc compleate all as specified and directed by Engr-in-charge.

S&F 150 mm dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend WC/ MS clips etc fixed on walls compleate all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compleate all as specified and directed by Engr-in-charge.

S&F vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile of size 800X800 mm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer of mortar in CM 1:6 compleate all as specified and directed by Engr-in-charge. (Make-Johnson/Somany/Kajaria)

M&L cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25 mm thick as in flooring with water proofing compound (WPC measured seperately) compleate all as specified and directed by Engr-in-charge.

S&F vitrified Ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces as skirting including 10mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles compleate all as specified and directed by Engr-in-charge. (Make-Johnson/Somany/Kajaria)

Taking down cement plaster on brick/ concrete walls incl raking out joints, hacking for key, scrubbing down with water etc compleate all as specified and directed by Engr-in-charge.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls compleate all as specified and directed by Engr-in-charge.

M&L for cement plaster 15 mm thick in cement mortar 1:4 in two coats using WPC finished even and smooth without using extra cement for external faces of walls compleate all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound compleate all as specified and directed by Engr-in-charge.

M&L for preparation new plastered internal surfaces and applying two coats of Interior Emulsion (Asian Rayale interior enulsion) over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 3mm thick wall care putty of three layer, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for cement plaster 5 mm thick in cement mortar 1:3 finished even and smooth without using extra cement for internal faces of walls compleate all as specified and directed by Engr-in-charge.

Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) compleate all as specified and directed by Engr-in-charge.

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) compleate all as specified and directed by Engr-in-charge.

S&F plain solid straight chowkats for windows and frames wrought framed rebated on solid rounded or chamferred put together with glue pinned joints compleate all as specified and directed by Engr-in-charge.

S&F IInd class HW Glazed and skeleton shutters of thickness 35mm , open rebated & prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, fitted with cut and mitred beads for securing glass, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats compleate all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6, Type C1 (using 20mm graded aggregate) as in coping on walls anchorage block of hold fasts including necessary formwork complete all as specified and as directed by the Engr-in-Charge.

M&L for M.S Hold fasts of FI 25 x 3 mm compleate all as specified and directed by Engr-in-charge.

M&L for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer compleate all as specified and directed by Engr-in-charge.

M&L for 75 mm size, butt hinges medium weight cold rolled mild steel compleate all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, 100 mm long fabricated type anodised compleate all as specified and directed by Engr-in-charge.

S&F alluminium, anodised, barrel tower bolts of extruded section of size 100 mm long compleate all as specified and directed by Engr-in-charge.

S&F Stainless steel (GRADE 304) wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples compleate all as specified and directed by Engr-in-charge.

S&F 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane compleate all as specified and directed by Engr-in-charge.

S & F Flush shutter 40mm thick solid core construction with block board core and plywood face panels covered with decorated face veneer on one face with lipping to match compleate all as specified and directed by Engr-in-charge.

S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc compleate all as specified and directed by Engr-in-charge. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc compleate all as specified and directed by Engr-in-charge. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium 5mm dia hexagonal channel for grill fixed (decogrill) to aluminium frame with aluminium bidding v Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F Solid PVC Door Frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F MS door springs (Capsule type) 150 mm long and including roller and roller plate compleate all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised compleate all as specified and directed by Engr-in-charge.

S&F alluminium, anodised, barrel tower bolts of extruded section of size 150 mm long compleate all as specified and directed by Engr-in-charge.

S&F aluminum anodoised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts etc complete of size 300mm compleate all as specified and directed by Engr-in-charge.

S&F 100 mm SS Butt hinges compleate all as specified and directed by Engr-in-charge.

Cutting holes in brick wall built in CM for inserting hold fast etc and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B1 with depth of embeded purline exc half brick but n.exc one brick compleate all as specified and directed by Engr-in-charge.

Treating to back of chowkats are tarred exc 0.1 Sqm but n.exc 0.5 Sqm each compleate all as specified and directed by Engr-in-charge.

Treating to holdfasts n.exc 0.1 Sqm each compleate all as specified and directed by Engr-in-charge.

Supply, providing and fixing suspended false ceiling consisting of 8mm thick calcium silicate seamless board suspended on GI framework with staggered joints, GI framework to consist GI perimeter channel 25mmX20mm of 22 gauge along perimeter of false ceiling. Channel section of 50X25mm of 22 gauge and at 300mm centre to centre throghout one way fixed with screw/nut bolt and other direction 40x15 mm 22 gauge channel provided with interlocking with GI cleat and expansion fastnors including hangers 6mm dia GI fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsm board with joining compound paper tape and two coat plasting emulsion paint over one coat of primer and one layer of putty 3mm thick in three layers suitable for calcium silicate board( as per the recommendations/ practice) ncluding necessary scaf folding and shuttering complete as directed as specified and directed by Engr-in-Charge.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces compleate all as specified and directed by Engr-in-charge. (Make-Asian Apcolite or Equal from Berger, Nerolac)

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface compleate all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate compleate all as specified and directed by Engr-in-charge.

M&L for anti-skid rectified ceramic tile of size 400x400x8 mm thick over cement screed 10 mm thick in CM 1:4 with WPC as per manufacturer's instruction over 25 mm thick PCC type B0 1:2:4 levelling course on RCC slab compleate all as specified and directed by Engr-in-charge. (Note-WPC shall be measured and paid separately)

M&L for Glazed ceramic tiles in vertical surface 600x300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering CM 1:3 compleate all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes in 75mm. Dis single socketed, in any length with rubber ring joints, Fixed in wall/floor compleate all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes (110mm) single socketed, in any length with rubber ring joints, fixed to wall/floor compleate all as specified and directed by Engr-in-charge.

PVC (SWR) bends with acces door any radius 110mm compleate all as specified and directed by Engr-in-charge.

PVC (SWR) bends with access door any radius 75mm compleate all as specified and directed by Engr-in-charge.

S & F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal compleate all as specified and directed by Engr-in-charge.

S & F for 75mm dia PVC (SWR) branch piece, double (double Y) equal or unequal compleate all as specified and directed by Engr-in-charge.

S & F for 110mm PVC (SWR) vent cowl compleate all as specified and directed by Engr-in-charge.

PVC (SWR) junction single, (Single 'T') equal or unequal 110mm compleate all as specified and directed by Engr-in-charge.

PVC (SWR) junction single, (Single 'T') equal or unequal 75mm compleate all as specified and directed by Engr-in-charge.

S&F PVC (SWR) couplers 75mm compleate all as specified and directed by Engr-in-charge.

S&F PVC (SWR) couplers 110mm compleate all as specified and directed by Engr-in-charge.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets compleate all as specified and directed by Engr-in-charge. Make: Parryware cat No - C0578 White Colour/ Johnson Cat No-P0519PW/ Jaguar Cat No- URS-WHT-13261

Supply only 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed compleate all as specified and directed by Engr-in-charge. Make-CERAParryware Cat No - T0802A1/Johnson Cat No- T2601C4/Jaguar Cat No- ARI-39011

S&F in repairs CP brass towel rail 60 cm long fixed compleate all as specified and directed by Engr-in-charge.

S&F in repairs vitreous china urinals coloured half stall type including all fittings compleate all as specified and directed by Engr-in-charge. Make: Parryware cat No - C0578 White Colour/ Johnson Cat No-P0519PW/ Jaguar Cat No- URS-WHT-13261

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe compleate all as specified and directed by Engr-in-charge.

S&F in repairs Chinaware partition for urinal of size 310 x 700 mm compleate all as specified and directed by Engr-in-charge.

S&F in repairs viterous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern compleate all as specified and directed by Engr-in-charge. Make-(EWC) Parry ware (Cat No-C844A White) or Cera (Cat No-3131 White) or Hindware (Cat No-92082 White)

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm compleate all as specified and directed by Engr-in-charge.

S&F in repairs brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) compleate all as specified and directed by Engr-in-charge. make Parryware Cat No- T3203A1/Johnson Cat No- T0060C/Jaguar Cat No- ALD-769L300x190

Excavating in trenches in soft/ loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for fdn, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out compleate all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm compleate all as specified and directed by Engr-in-charge.

Removing excavated soil material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point compleate all as specified and directed by Engr-in-charge.

Demolition and breaking up of 150 mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for reinforced concrete pipes class NP2 of 150 mm dia laid and jointed complete with collars compleate all as specified and directed by Engr-in-charge.

M&L for plain cement concrete Type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested compleate all as specified and directed by Engr-in-charge.

M&L for precast cement concrete cover slab for man hole, in type B-1, 1:2:4 using 20 mm graded aggregate set in CM 1:6. (Reinforcement shall be measured and paid seperately) compleate all as specified and directed by Engr-in-charge.

S&F 6 to 8mm dia TMT bars in reinforcement cut to length, bent to shape required incl cranking, bending hooking and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips compleate all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 (1:3:6) (using 20mm graded aggregate), exc. 10cm in width and setting in cement mortar 1:6 compleate all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement compleate all as specified and directed by Engr-in-charge.

S&F Hume pipe septic tank 25 users capacity including necessary earth work in soft/ loose soil, PCC 1:3:6 in bed concrete with accessories like AC vent pipe, cowl manhole cover etc including connecting to the sewer line complete all as shown in drg No.TD/A/57 sheet 1/1 including removal of old septic tank and connected works complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) compleate all as specified and directed by Engr-in-charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by the Engr-in-Charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering compleate all as specified and directed by Engr-in-charge.

M&L for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface compleate all as specified and directed by Engr-in-charge.

M&L for 75 mm thick cement concrete type E2, 1:5:10 (using 40mm graded aggregate) compleate all as specified and directed by Engr-in-charge.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed in CM1:6 compleate all as specified and directed by Engr-in-charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 0.05 m thick incl well ramming including watering as required compleate all as specified and directed by Engr-in-charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment compleate all as specified and directed by Engr-in-charge.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating compleate all as specified and directed by Engr-in-charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed by the Engr-in-Charge.

M&L for PCC 1:4:8, Type D2 in foundation bed to drain complete all as specified and as directed by the Engr-in-Charge.

M&L for precast cement concrete block masonry type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 compleate all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge.

M&L for precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in cover slabs and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed by the Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc compleate all as specified and directed by Engr-in-charge.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic on wall except beam, column and RCC roof and chases cutting incl 1.6 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch compleate all as specified and directed by Engr-in-charge.

One 3 pin socket outlet, 5 Amps controlled by one switch in same board with other switches

All as per item No 104 above but for one 5 pin 5 amps socket outlet an independent board compleate all as specified and directed by Engr-in-charge.

All as per item No 104 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board compleate all as specified and directed by Engr-in-charge.

S&F switch piano flush type 5A one way compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 5 pin 5 Amps flush type compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 6 pin 15 Amps flush type multi purpose compleate all as specified and directed by Engr-in-charge.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals compleate all as specified and directed by Engr-in-charge.

S & F in repair fan regulator electronic step type 100 W, 250 Volts compleate all as specified and directed by Engr-in-charge.

S&F LED study (reading) down lighter 1 x 3 W, AC, 230 V with all fitting accessories prewired and including connecting up with twin core twisted flexible copper conductor cable compleate all as specified and directed by Engr-in-charge. MAKE: Philips Cat part No:48042480423031 /Wipro/Luker

Supply & fix surfface & wall mounted LED batten with aluminium housing and intergrated eletronic driver 20 W,240 volt compleate all as specified and directed by Engr-in-charge. Make Havells LUMININEPLUSBSS20WLED865SPCSS/Bajaj/CG

S&F LED mirror light fitting with aluminium housing and intergrated eletronic driver 10 W,240 volt including all electrical connection all as specified and dirceted by Engineer in charge.Cake Havells LUMININEPLUSBSS210WLED865SPCSS/Bajaj/CG

Supply and fix LED security light 35 W IP 65 protection including all accessories and suitable GI pipe for fixing on wall including all connection all as specified and dirceted by Engineer in charge.MAKE: Havells cat part No ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC/Bajaj/CG

Taking down old DBs from existing position including MCB,s compleate all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door compleate all as specified and directed by Engr-in-charge.

Taking down old sub main wiring of any size compleate all as specified and directed by Engr-in-charge.

M&L In repair sub main wiring on wall/ceiling with 2 runs of 2.25 Sqmm single core PVC cable as per IS 694-1990(third revision) insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in PVC cassing capping with all accessories such as Tees, elbows, junction box etc.as required of not less than 20 mm dia and 1 run of2.25 Sqmm single core PVC insulated unsheathed 1100 Volts grade, multistranded copper conductor FRLSH cable as earth continuity conductor and connecting to existing earth dolly with suitable size thimble and making good the disturbed surface to match with the existing including taking down of old sub main wiring compleate all as specified and directed by Engr-in-charge. Note : 3 runs of 2.25 Sqmm sub main wire and one run of PVC cassing and capping with accesories shall be measured as one unit.

M&L for sub main wiring with 2 runs of 4 Sqmm (FRLSH) PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLSH) cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good distrubed surface to match with existing surface . Note -1. 2 runs of 4 Sqmm sub main wire and one run of 4 sq mm for earthing and cassing capping with accesories shall be measured as one unit compleate all as specified and directed by Engr-in-charge.

M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan compleate all as specified and directed by Engr-in-charge.

M & L Taking down 450/350/300mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan compleate all as specified and directed by Engr-in-charge.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No compleate all as specified and directed by Engr-in-charge.

M & L Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion compleate all as specified and directed by Engr-in-charge. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

Taking down old stop valve,stop cock,bib cock ,swivel shower,from existing position including all fittings compleate all as specified and directed by Engr-in-charge.

S&F CPVC globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes compleate all as specified and directed by Engr-in-charge.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge. Make:-CERA/JAGUAR/HINDWARE

Supply & fix of bib cock short body chromium plated with flange and aerator CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge. Make:-CERA/JAGUAR/HINDWARE

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT compleate all as specified and directed by Engr-in-charge.Make:-CERA/JAGUAR/HINDWARE

Supply & fixing of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe compleate all as specified and directed by Engr-in-charge.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge.Make:- Supreme

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge. Make:- Supreme

Taking down old unserviceable GI tubing of size 25mm compleate all as specified and directed by Engr-in-charge.

Taking down old unserviceable GI tubing of size 20mm compleate all as specified and directed by Engr-in-charge.

Supply and fix in repairs Ball brass valves (PTMT) of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed compleate all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters compleate all as specified and directed by Engr-in-charge.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection compleate all as specified and directed by Engr-in-charge.

Material and labour for unreinforced PCC cable cover class LV, TypeI ,Flat size 250 x 150 x 40 mm complete compleate all as specified and directed by Engr-in-charge.

Supply and lay in treanches /fixed on walls / poles GI tubing medium grade with all fittings of 50 mm bore compleate all as specified and directed by Engr-in-charge.

Supply and laying XLPE insulated galvanised steel strip or wire armoured electrc power cable with straned aluminium conductor 1100 V grade of size 6 sqmm 2 core compleate all as specified and directed by Engr-in-charge.

S&F sheet metal enclosure for DBs and MCbs to be used single door type, 4 way with 200 Amps rated busbar of 240 Volts single phase compleate all as specified and directed by Engr-in-charge.

S&F MCB SPN 'B' Curve 6-32 Amp ,240 Volts Make L&T Cat Part No. BB20160B or Schneider/Legrand compleate all as specified and directed by Engr-in-charge.

S&F MCB SP 'B' Curve SP 6 To 32 Amp , 240 Volts with all incoming/ outgoing connections with proper size of lugsMake L&T Cat Part No. BB10060B to BB10320B or Schneider/Legrand compleate all as specified and directed by Engr-in-charge.

S & F Intergral Led aviation light ( obstruction light fitting) comprising of aluminium housing with polycarbonate enclousure with all incoming/ outgoing connections with proper size of lugs compleate all as specified and directed by Engr-in-charge.

M & L Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion compleate all as specified and directed by Engr-in-charge. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

M/s ANTONY THOMAS AND CO

Albert Rebello and Company

ANIE JOHN CONTRACTORS

M/s Antony Kallarakkal

Vidya constructions

THOMSONS CONSTRUCTIONS