Providing Refurbishment like flooring tiles, Paintings to the Culture lab (Room No.101), Department of Bio - Technology in SVU Campus, Tirupati.

Providing Post-construction Anti termite Treatment process by Drilling Holes to Bottom of walls at Specified Intervals - 300mm, injecting Approved Odour Free Chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide Imidacloprid 30.5% SC (IS 63131) (Bayer PREMISE or Equivalent) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution, which creates a continuous chemical barrier along the walls / Wood Fixtures of building which kills or repels terminates & impervious to termite entry, Using Pressure injecting Euipment, Sealing the holes after Treatment, Including cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for finished item of work as directed by Engineer-in-charge.

Flooring with Double charged/stain free soluble salt procelain vitrified tiles with double layer pigment of size 600mm x 600mm and thickness between 8-10mm of any colour and finish in all shades and designs of first qulaity set over a base coat of epoxy emulsion grout / synthetic / resin adhesives in width of 3-5mm , fixing full depth , jointing and pointing laid over existing flooring / CC bed /slab, jointing / pointing grout mixed with pigment of matching shade , including cost and conveyance of all materials , labour charges , incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution. In all floors.

Providing Repairs and Alterations to the Existing Door Shutters, By Removing & Re-Fixing the shutters after Cutting the Bottom to Match the Proposed Rise of Floor, including Cost and Conveyance of all Materials, operational, incidental and labour charges,etc; complete for finished item of work and as directed during execution.

(A) Aluminium Door Shutters

(B) Teak Wood Door Shutters

Throughly removing the white wash or colour wash wall surfaces by steel wire brushing and /or scraping, sand papering, and preparing the wall surface smooth ;inlcuding necessary repairs to scraches , providing and applying synthetic plaster of putty or cement based putty of average 1-2mm thickness over plasted wall surfaces to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, appliane memory paper , sanding the surface, clean and wipe off loose dust, applying / knifing paste filler by putty knife / muslin pad, Air dry for 2 - 3 hours , sand with 180& 320 No. sand paper for the surface preparation, Painting with 2 coats of plastic emulsion paint of approved brand and shade over one coat of interior grade cement primer ( total 3 coats ) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Painting to existing old plastic emulsion painted walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Providing painting for old teak wood joinery two coats using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

Providing painting for old Iron work two coats using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.