Construction of Govt. Polytechnic Building Sullah at Parour (Block-A) (Administrative Block)

Amount

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. works. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST and other taxes imposed by the government.

Excavation in drains and channels etc; in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. Rate inclusive royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royalty, malkana, toll tax, GST and any other taxes imposed by the government.

Stone filling tightly dry hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, Footings, bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular or polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra for all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for cast in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls up to any thickness/ any height.The Rate is inclusive of cost and carriage of material with all lead & lift and other incidential and toll taxes, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and vibrated and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M20 (M-twenty) mix design to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millileter) with cement contents not less than 330 kg/ cum mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of columns, and the like mass concrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of Royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre)with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in column, pillers posts and struts in all depth/thickness upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength 20N/mm2 (Twenty newton per square millimeter) cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver in all depth/ height upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in moulding as in cornies, window sills etcetra in girth upto all floor levels. The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete in reinforced concrete Chhajjas for all thickness in up to floor two levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement isto Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work . The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.Rate is inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2 (twenty newton pwr square millimetre) and minimum cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10( Zero point ten)meter. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 with cement contents not less than 360 Kg (Three hundred sixty kilogram per Cubicmetre) mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for cement concrete work in wall any thickness but not l0 meter thickness) attached pilasters, buttresses, plinth & string course etecetra including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, Royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying tor steel of TATA TISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Square rubble masonry crushed with hard stone of approved quality in foundation and plinth including racking out the joints in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of material with in all leads, lifts and other incidentals, as per the approved specification, drawing and design. Rate is inclusive of octroi, royality, malkana, toll tax,sale tax, GST and any other taxes imposed by the government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form work and curing complete, as per H.P.P.W.D. specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rates is including of octroi, royality, Malkana, toll tax, sales tax or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or VG-10 using 1.70 kg (one decimal seven) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification drawing and design and curing complete including curing complete scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks in cement mortar 1:4 (one cement isto four sand) in super structure up to all floor level as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Square rubble masonry crushed with hard stone of approved quality in foundation and plinth including racking out the joints in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of material with in all leads, lifts and other incidentals, as per the approved specification, drawing and design. Rate is inclusive of octroi, royality, malkana, toll tax,sale tax, GST and any other taxes imposed by the government.

Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including clests angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing Coloured anodised aluminium shutter of door , window and ventilator including providing and fixing hinges /pivots and making provision for fixing of fitting whe ever required including the cost of PVC / neoprene gasket as required extrusion section of Jindal/ Hindalco as per approved shade aluminum work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ IS marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board shutter of Novapan / Kitply/ National/Action/Tesa with 6 mm (Six millimetre) thick hard wood edging and 1mm thick laminated formout side of approved shade and PGI sheet lining inside including hinges, handle,knob & neccessary fitting complete as per approved specifications, drawing, design,and entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated pattern grill 8 mm(eight millimtere) thick to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) as per approved specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter of Rajshri code 9.120 consisting of frame made out of M.S. tubes of 19 gauge( Ninteen gauge) thickness and size of 19mm x19mm ( Ninteen into ninteen millimeters) for styles and 15mmx15mm ( fifteen into fifteen millimeters)for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm( five millimeters) thick heat moulded PVC "C" channel of size 30mm( thirty millimeters)thickness, 70mm( Seventy millimeters) width cut of which 50mm ( fifty millimeters)shall be flat and 20mm ( twenty millimeters) shall be tappred in 45 ( forty five)degree angle on either side forming style and 5 mm( five millimeters) thick, 95mm ( ninety five millimeters) wide, PVC sheet out of which 75mm shall be flat and 20mm( twenty millimeters) shall be tapered in 45 ( forty five)degree on the inner side to form top and bottom rail and 115mm( one hundered fifteen millimeters) wide PVC sheet out of which 75mm (seventy five millimeters) shall be flat and 20mm ( twenty millimeters) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm( ten millimeters) thick, 20mm( twenty millimeters) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails jointed mitred and jointed with solvant cement adhesive including fixing of PVC shutter with existing frame with MS butt hinges/riveted with necessary screws of code No. 9.120 of Rajshri The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 12mm (Twelve millimetre) thick Phenoal bonded both side Preleminated board BWP grade partical board matt finish of action tesa / kitlam/ kitply/ greenlam of ISI No. 12823 and approved shade for infill panels of aluminium door partition etecetra as per PWD specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 6mm ( six millimetre) thick glazing in aluminium door, shutters . with PVC / neoprens gaskets of Modiguard/ Saint Gobain complete as per the Architectural Drawings approved specification and design and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 5mm ( five millimetre) thick glazing in aluminium for window, ventilator and Dormer, shutters . with PVC / neoprens gaskets of Modi guard/ Saint Gobain complete as per the Architectural Drawings approved specification and design and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 5mm ( five millimetre) thick Frosted glazing in aluminium for toilet window and ventilators shutters . with PVC / neoprens gaskets of Modiguard/ Saint Gobain complete as per the Architectural Drawings approved specification and design and the direction of the Engineer-in Charge, (Cost of aluminium snap beeding shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing stainless steel wire mesh for shutter of aluminum doors, windows, ventilaotrs with necessary fitting and complete as per detail and drawing of doors and windows complete as per the Architectural Drawings and approved specification and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing coloured / anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

300x16mm (Three hundred into sixteen milimeter) size

250x16mm (Ttwo hundred fifty into sixteen millimetre) size

Providing and fixing coloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

200x10mm (Two hundred into ten millimeter) size.

100x10mm (One hundred into ten millimetre) size.

Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete 125mm (One hundred twenty five millimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

125mm (One hundred twenty five millimetre) size.

100mm (One hundred millimetre) size.

Providing and fixing aluminium bright finished hard drawn hooks and eyes 200 mm (Two hundred millimetre) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 65x35 mm (Sixty five into thirty five millimetre) special quality bright finished brass cup board locks or ward robe lock with six livers including necessary screws etc. complete( Indian make of approved quality). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Kota stone 55x55/55x27.50cm with 7.5 cm (Seven decimal five centimetre) wide Jaisalmer yellow band flooring 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding and nossing complete as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing nosing and moulding complete as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying Red Sand stone slab size of 55x55/55x27cm slab flooring 40mm (Forty millimetre) average thick on 20mm (Twenty millimetre) (Average) thick base of cement mortar 1:4 ( One Cement isto Four Sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rabbing and polishing cutting and moulding complete including carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying heavy duty vitrified tiles of Nitco/Kajaria/Orient bell/Johnson/Rak double charged 600x600x10mm (Six hundred into six hundred into ten millimeter) of approved shade and colour in flooring, tread of steps and landings and skirtings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent hevy duty viterified tiles manufactured of approved shade and colour in flooring and skirting on 12mm thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 400x400 mm/600x600 mm (Four hundred into four hundred / Six hundred into six hundred millimetre) Acid resistant vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent hevy duty viterified tiles manufactured of approved shade and colour in flooring on 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 400x400 mm/300x450 mm (Four hundred into four hundred / Three hundred into four hundred fifty millimetre) Acid resistant vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent hevy duty viterified tiles manufactured of approved shade and colour in skirting or dado on 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying Precast terrazzo tiles 300x300x25mm (Three hundred into three hundred into twenty five millimetre thick automatic Hydraulic commpressed and polished Trazzo tiles in flooring and skirting ISI marked marked no IS 1237 (50%) (Fifty Percent) Grey cement in white yellow green and maroon chips of 0,B and 2B size of NTC with marble chips of specified sizes laid in floors treads of steps and landings on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing and cutting complete with tiles of following shades. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300 x 300mm (Three hundred into three hundred millimetre) size antiskid (Non slippery) vetrified tiles of Nitco/Kajaria/Orient/Johnson/Rak in flooring, treads of steps laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto three sand) finished with flush pointing in white cement.complete upto all floor level in all heightsas per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm (Three hundred into four hundred fifty millimetre) Ceremic glazed tiles 6mm (six millimetre) thick in skirting and dado of Nitco/ Johnson/Rak/Kajaria laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetre) LABRADOR Design ( Rainbow Series) tile of NTC of approved shade in flooring laid over on the bed of 12 mm ( twelve millimetre) thick cment platers 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 19mm (Nineteen millimeters) thick cheema pink granite stone flooring having semi round nosing laid over 20 mm ( twenty millimeters) thick base of cement mortor 1:3(one cement: three sand) and jointed with cement sluree mix pigment to match the shade of granite stone including rubbing polishing moulding and nosing complete as per approved specification, drawing and design inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 19 mm ( Ninteen millimeters) thick polished marble stone flooring with round and nousing and moulding as per drawing and detial laid over 20 mm ( twenty millimeters) thick base of cement mortor 1:3 (one cement: three sand) and jointed with grey cement slurry mix pigment to match the shade of marble stone including rubbing polishing, nosing and cutting complete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing plinth protection with 60 cm ( Sixty centimeter) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimeter) dia half stone ware pipe for drainage purpose including laying over concrete 1:5:10 ( one isto five isto ten) complete within all leads and lifts of materials and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA durashine/ sail/ Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips of TATA Durashine/ Sail 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail with hot dipped metalic zinc coated sheet with top coat of regulat modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. .The rate is inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) of TATA/ Reliance/ Jindal thick eaves board/Facia/Soffit/Ceiling including cutting, fixing and gass/electric welding steel roof member and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15cm (Fifteen centimetre) wide 45cm (Forty five centimetre) deep over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm (Fourty into three millimetre) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.63mm ( zero point sixty three millimeters) thick sheet.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) rain water pipes of Finolex/Supreme/ Prince of working pressure not less than 4.00/6.00 kg (four to six kilogram) per centimetre square including filling the joints with approved adhesive complete 100 mm (one hundred milimeter) diametre ISI marked pipe. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Finolex/Supreme/ Prince including filling the joints with approved adhesive complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

100mm (one hundred millimetre) dia PVC plain bend

100mm (one hundred millimetre) dia PVC shoe

Providing and fixing 100mm (One hundred milimetre) dia metre M. S. holder bat clamps of approved design to P.V.C pipes embedded in and including cement concrete block 10cmx10cmx10cm (Ten centimeter into Ten centimeter into Ten centimeter) of 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the wall etc. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections of Tata/Sail/Jindal composed in beams, joists, channels, angles, tees flats with connecting plates or angles, cleats as in trusses and trussed purlins, main and cross beams, hips, jack rafters, purlins connect to common rafter and like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Painting two coats of Nerolac/Berger/Asian Paint (excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing and scaffolding complete as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:3 (one cement isto three sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeters) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimetewrs) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth, with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth and scaffolding, with cement mortar 1:5 (one cement isto fiver sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15x12 mm (Fifteen into twelve millimetre) tile Planks cladding in ISI marked of approved brand and shade fixing on wall surface 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding etc. complete.as per Architectural drawing ,design and complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing Unistone cladding12mm (Twelve millimetre) thik Cement Concrete .surface side as on faces of Arch masonry walls .on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding etc. completeas per approved shade,drawing ,design and specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing Everst design fiber cement board celling tile of size 595x595 mm (Five hundred millimetre into five hundred millimetre) over ready made power coated matel sheet section frame work 600 c/c (Six hundred centre to centre) grid suspended wall frame fixed with studs, self drilling toping counter sunk jointing with necessary fitting complete as per approved specifications, drawing , design, and entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Acoustical panels of 600x1200x25 mm (Six hundred into twelve hundred into twenty five millimetre) of Dexune Accoustical Himalayan accustical /Everst Acoustical wall pannel fixed with powder coated GI frame work with necessary fitting complete as per approved drawing, design and specification and entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Acorirtical panels of 600x600x16 mm (Six hundred into Six hundred into sixteen millimetre) mineral fiber tile of Gyproc with wood wool backing and fixing with power coated GI frame work @ 600mm C/C in comination with 150x12 mm (One hundred fifty into twelve millimetre) thick Rai wood border as per detail patterin, drawing, design and specification. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Applying a priming coat of Nerolac/Berger/Asian Paint over on wall concrete/ masnory/Asbestos / cement /plastered surface after preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints brushing wood primer pink as per PWD specification. The rates are inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Finishing wall with Apex weather proof exterior emulsion of Asian paint/Nerolak paint/ Surakshapaint/ berger paint/Dulux paint manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Distempering (two or more coats) with oil bound washable distemper of Berger/Nerolac/Asian Paint and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing synthetic and Acrylic washable distemper of two coats of Assian/Dulux/Nerolac of approved shade on undecorated wall surface to give an even shae inclding priming coat with primer of approved brand and manufacture throughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand pepering smooth . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Painting (two coats) with Premium enamal paint of asian paint/berger/DuluxAcrylic washable emulsion of washable distemper of approved shade manufacture and of required hade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with acrylic emulsion paint of approved shade of Assian/Dulux/Nerotac paint and manufacture for interior grade on undecorative concrete/ stone/ plastered wall surface to give an even shae inclding throughly brushing the surface free from mortor dropping and other foreign matter and sand papering smooth including of applying of putty required for meteling the surface. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing SST railing 50 mm ( fifty millimeters) dia hand rail slip resistance with rounded ends at two level at 75 cm to 90 cm ( Seventy five centimeter to ninety centimeter) high and extended and 30 cm ( thirty centimeter) beyond top and botton of ramp as per detail and 25 mm ( twenty five millimeters) dia SST bullasters welded to 50 mm ( fifty millimeters) dia SST pipe embended and cement concrete 600 mm ( six hundred millimeters) center to center as per detail and specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 40mm (Forty millimetre) dia.M.S. hollow pipe Parapet handrail slip resistant in 45cm height as per Archtect Drawing,design welded with MS 40x5mm flat (Forty into five millimetre) Heaving Solid square bar bluster in combination 19x19mm (Nineteen into nineteen millimetre) state and 12x12mm (Twelve into twelve millimetre) diagonnal welded with M S flat at bottom and top State Blusrer heaving distance 15cm C/C (Fifteen millimetre centre to centre) alternatively and jointing with electrical gas welding at top and bottom with MS Flat complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing stainless steel 85 cm ( Eighty five centimetre) high know down stair railing of kitch 38 mm (thirty eight millimeters) dia hand rail fixed on 10x50 mm ( ten into fifty millimetre) side mounted flat blauster system with glass no DS 54-2- G-10 placed at 1200 mm ( twelve hundred millimetre) center to center along with 3 Nos( three numbers) 10mm ( ten millimetre) mid rail connected at side of blauster with fixes on the blauster would be fixed on floor with casted base plate on minimum 6 mm ( six millimetre) thickness base plate shall be conncected with suitable SS grade over cape alinging complete as per detail and design, drawing and specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Grab bar 50 mm ( fifty millimeters) dia SST pipe bars fixed with wall and floor as per detail and position of W.C. and Toilet. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing water proof treatment in depressed slab shall be done with fixit pidilite proof coating shall be done in two coats apply first coat of Dr. fixit fast flex to clean the saturated surface maintaining coverage of 6.70 Sqfeet ( six point seven zero square feet)( 0.60 Sqm) ( Zero point sixty suqare meter) per kilograme to achive 1 mm ( one millimeters) thickness. The coating shall also be extended upto 300 mm (thirty hundred millimeters) vertically. The second coat shall be applied in opposite direction after 4 to 6 hours of application of Ist coat then sprinkle sand on top surface of applied Dr. fixit fast flax white steel tacky over the second coat then apply cement mortor 1:4( one cement : four sand) admixure with 200 ml (two hundred milliletre) of pidi proof LW @ 200 ml/50Kg towards drain pipe, while the second coat Dr. Fixit still tacky as per specifications, and approved drawing and design.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 1200x1800 mm (Twelve hundred into eighteen hundred millimetre) green chalk board/Black board shall be made of steel of thikness 0.3 to 0.4 mm. (zero decimal three to zero decimal four millimetre) It shall have vitreous Enmal coating of 0.095 mm (zero decimal zero nine five millimetre) minimum thickness on top and 0.3 mm (zero decimal three) on the back. top shall be free from waviness and shall show excellient ability. The core material shall be 9mm (Nine millimetre) thik MDF board heaving bluk density of 750kg/cum (Seven hundred fifty kilogram per cubic metre) and grade-1 as per IS : 212406-203 edition 2.2 the backing material sheet shall be min. 0.25mm (zero decimal two five millimetre) thick electro galvanised steel sheet conforming to is: 277-2003. The board shall be fixed on the wall with specially designed J clamps and Sq. clamps with help of Nylon sleves and screws as per site requirement the Government.

Expension joint system related with wall joint (internal and external) location as per drawing and direction of Engineer-in Charge. The joint shall be filled with polysterence back or rod base menber self alinging /centering arriangement and support. The material shall be such that it provides as expension joint system suitable for vertical wall to wall/ wall to corner application, both new and exisitng construction in office building and complexes with no slipping down tendancy amongest the component of the joint system shall be filled with sealent of Dr. Fixit/Pedelite C.I. Co. T-680. The joint shall utilize light weight with polysterence back or rod surfaces mechanically snap locking multicelluar to facilitate movement as per specification and approved drawing. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm (One hundred fifity millimetre) dia M. S pipe post with cc base as per detail drawing ,design and specificatian The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing orisa Pan No 20090 of size 53x41 cm( fifty three into forty one centimeter) vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera/hindware/star white/ Jaquar snow white shade with low level PVC cistern (earth work, bed concrete, foot rest and trap and cistern to be measured and paid for separately) including entire carriage of materials within all leads and lifts as per direction of Engineer-in- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. pan No 20087 (S-10) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) wash down water closet hindware/jaguar/cera of star white/ snow white fitted to jet pressure and seat cover integral P or S trap including jointing the trap with pipe in fixture ( seat cover/ jet pressure to be paid sepertely) including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. of star sr. No 20087 (S-10) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) (Sleek plus) wash down water closet hindware/jaguar/cera of star white/ snow white fitted to jet pressure and seat cover integral P or S trap including jointing the trap with pipe in fixture (seat cover/ jet pressure to be paid sepertely) including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimeter) size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing plastic seal ( solid/hollow type) and cover for wash down water closet with C.P. brass hinges ad rubber buffers ( solid type) white plastic seat and cover.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaguar/ Hindustan with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 5.00 (Five) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Hindustan with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Garnet No 10010 and size 55x40 cm ( fifty five into forty centimetre) without pedestial ( of Hindware/Cera/Jaguar) of white/ snow white with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same including all fitting complete in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Garnet No 10080 and size 58x43 cm ( fifty eight into forty three centimeters) ( under counter basin of Hindware/Cera/Jaguar) of of white/ snow white with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same including all fitting complete in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous China pedestal of Cera/ Jaguar/ Hindustan for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) diametre C.P. brass waste (Heavy duty make ISI marked NO-8931 & 8934) Jal/ Jaguar for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diameters rubber plug for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diameters M.I. union for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) diameters PVC waste pipe (Heavy duty make ISI marked NO-8931 & 8934) of approved brand ISI marked for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP grating of ESS/JAL/Kingston for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PTMT/PVC jet sprey of continental series/clasic series/floral series of jaguar/ hindware/ cera for Europen seat of approved shade and manufacture, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) beveled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to plugs with C.P. screws and washers of Atul/Modi Guard/ Golden fish including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 750x20mm (Seven hundred fifty into twenty millimetre) of continental series of Jaguar/Classic of Hindware/Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass socket including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing chromium plated brass soap dish of ESS/ Jal/ Jaguar with C.P. brass brackets fixed with cleats with C.P. brass screws complete in all respect within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap of continental series of Jaguar/Classic Series of Hindustan/ Floral series of Cera within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing casealed C.P. brass stop cock Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked ) fitting in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen millimetres) diameters C.P. brass push cock tap of JAL/ESS/Jaguar all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC connection pipe brass union 450 mm length 15mm dia ISI marked of including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and placing water tank of make PVC (Poly venyl chloride) Sintex (Triple layer) having capacity 1000 ( One thousand) litres each with necessary fitting including over flow pipes scour pipe and bull valve and with cover locking arrangement of good quality including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and placing water tank of make PVC (Poly venyl Chloride) Sintex having capacity 500 ( five hundred hundred ) litres each with necessary fitting including over flow pipes scour pipe and bull valve and with cover locking arrangement of good quality including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (fifteen milimetre) C.P. Brass Angle valve Jaguar/ESS/Jal/ Jaguar/ Cera without nuts & bolts including all fitting carriage of material within all leads, lifts, and other incidentals. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm dia mixer for kitechen sink of JAL/ESS/Jaguar with costed swing spout at top including necessary fitting complete in all respect . Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing polythene aluminum polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon of KITEE confirming to IS 15450-2004 for water supply including clamps at appropriate one meter spacing, cutting fixing and making good the wall etc. but excluding the cost of fitting internal work pipe exposed on wall 1216-16 mm O.D. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15 mm nominal bore/ diametre to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Heavy grade) tube fittings and clamps including making good the wall, ceiling and floor. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15 mm nominal bore/ diametre. to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Heavy grade) tube fittings and clamps including making good the wall, ceiling and floor. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC pipe gully trap grade"A" compete with CI gratting brick masonry chamber in CM 1:5 and water tight CI cover with frame of 300x300 mm size ( inside) the weight of cover to be not less than 4.53 Kg and frame to be not less than 2.72 kg 150 mmx100 size P or R Type. The rates are inclusive cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (1 Cement: 4 Sand :8 graded stone aggregate 40mm nominal size ) bedding for pipes of the 150 mm ( One hundred fifty millimeters) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex/ Prince working pressure not less than 6.0 kg/cm2(Six kilograme per square centimetre) I.S.I Marked including fixing with approved adhesive etc. complete The rate is inclusive for carriage of material within all leads, lifts and other incidentals. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

75 mm (Seventy five millimeter) diametre (2.7mm) Two decimal seven millimetre thick

110 mm (One hundred millimeter) diametre (4.6mm) Four decimal six millimetre thick

Providing and fixing PVC Single Equal Branch with oval access ISI Marked of Supreme/ Finolex insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimeter)

110 mm ( One hundred ten millimeter)

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply ie Tee, Albows/ connecttors coupler and clamps with jointing testing and fitting complete including cutting and making good the walls etcetra including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Equal Tee (1216)

Female elbow (1216x 15 mm thread)

Male thread connector (1216x15 mm)

Female thread connector(1216-15 mm )

Providing and fixing 110 mm ( One hundred ten millimeters) PVC Clamps ISI Marked od approved design with steel screws and rawal plug etc. Complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

P\F Viterous china urinal large flat back no 60002 size (39x37.50x54 cm) ( thirty nine into thirty seven point five into fifty four centimeters) urinal of Hindustan/ Cera/ Jaguar including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and Paid separtely) of star white/snow white Hindware/Cera/Jaguar within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Division Plate for urinals 600x300 mm ( Six hundred into three hundred millimeters) of viterous china of continental sires/ clasic series/ floral series including fitting complete in all respect within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Floor Trap size 110x75 mm ( one hundred ten into seventy five millimeters) ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600 mm X 450 mm X 150 mm (Six hundred into four hundred fifty into one hundred fifty milimetre) Vitreous China laboratory sink of Hindware/ Cera/ Jaguar with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing heavy quality stainless steel kitchen sink of approved standard ISI marked of AMC/ Unik/ DIAMOND with drain board and C.P. waste pipe C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting 610x510 (six hundred ten into five hundred ten millimetre) with bowl depth 200 mm ( two hundred millimeters)including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying ( to level or slope) of PVC 150 mm (One hundred fifty millimetre) of sewerage pipe of working pressure not less than 6 kg/cm2. (Six kilogrms per square centimetre) of Fenolex/Vectus/Reliance including filling the joints with approved adhesive complete. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and installation water lifting pump 1.00 HP of Kilosker/ crompton/ Worthton with warrenty fitted as per direction of Engineer-in-charge. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm dia (one hundred fifty millimetre) PVC Plain Bend ISI Marked of Supreme/Finolex/Prince including fixing with approved adhesive etcetra Complete including carraigre of material within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mm ( one hundred fifty millimeter) PVC Single Equal Branch with oval access ISI Marked of Supreme/ Finolex insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150 mm dia. PVC double Y junction with oval asses ISI Marked insertion rubber washer 3 mm thick bolt and nuts complete i/c fixing with approved adhesive etc. Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing chamber 300x300x500 mm inside size for stop cock with CI surface box 100x100x75 mm ( inside) with hinged cover fixed in cment concrete slab 1:2:4 (20 mm nominal size) 75 mm thick foundation concrete 1:5:10 ( 40 mm nominal size) and inside plastering wirh cement mortor 1:3 finished with a floating coat of neat cement including curing complete. with 100 mm cast in situ plain cement concrete wall in 1:2:4 ( 20 mm nominal size) complete with form work within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole (ie 23kg cover and 15kg frame) with frame cover weight 38KG (thirty eight kilograms) (single seat) including entire carriage of material within all leads and lifts and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 110 mm ( One hundred ten millimetre) high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive working pressure not less then 4.6 kg/cm2 Complete of Finolex/Vectus within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 110 mm ( One hundred ten millimetre) PVC Plain Bend ISI Marked including fixing with approved adhesive etc. Complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mmx610mm (Three hundred fifty five millimetre into six hundred ten millimetre) internal dimensions. Total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty millimetre nominal size) foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate 40mm (forty millimetre) nominal size), in side plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on wall and bed concrete etcetra complete. Inside dimension 455x610x450mm (Four hundred fifty five into six hundred ten into four hundred fifty millimetre) deep single pipe line. The rates are including cost and carriage within all leads lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

M/s Surindera Traders

Ashwani Sood

Prashanti Surya Construction Company