ED/IIMC/NIT/1/24-25 /107-re

Amount

(A) TWO NOS WATER TREATMENT PLANT INSTALLED NEAR GYMNASIUM AND NF-I BUILDING INSIDE THE CAMPUS

Core Silex

Fine Silex

Pebbles(1/2"/3/4")

Pebbles(1"/3/4")

Manhole Gasket(400)

Rubber Gasket(1MX1M)

Nut Bolt with Washer(5/8"/2/1/2")

HCL(Cleaning Chemical)

Resin 225NA

Core Silex

Fine Silex

Pebbles(1/2"/3/4")

Pebbles(3/4/1")

Softener Plant Bottom Dicks(600x1250)FRP Lining

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the all. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sections weighing less than 22.5 Kg./m

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty and one coat of primer etc. on the surface, if necessary. On steel or other metal surface. On steel or other metal surface. With super gloss (hi-gloss). Two coat (with any shade except white)

(B) ONE NO WATER TREATMENT PLANT INSTALLED NEAR MCHV BUILDING INSIDE THE CAMPUS

Core Silex

Fine Silex

Pebbles(1/2"/3/4")

Pebbles(1"/3/4")

Manhole Gasket(400)

Rubber Gasket(1MX1M)

Nut Bolt with Washer(5/8"/2/1/2")

HCL(Cleaning Chemical)

Valve Servicing

40 NB. Lateral pipe

Resin 225NA

Core Silex

Fine Silex

Pebbles(1/2"/3/4")

Pebbles(3/4/1")

Activated Carbon

Core Silex

Fine Silex

Pebbles(1/2"/3/4")

Pebbles(1"/3/4")

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the all. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sections weighing less than 22.5 Kg./m

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty and one coat of primer etc. on the surface, if necessary. On steel or other metal surface. On steel or other metal surface. With super gloss (hi-gloss). Two coat (with any shade except white)