Furniture Work at District Library at Veraval, Dist. Somnath

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum framing

of gauge 16. Aluminum framing size for vertical & horizontal support is

50 mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm. All

exposed surfaces finished with 1 mm thick Laminate of approved shade

complete with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with

open able stud from partition Including all materials and labor etc. Make

necessary grooves as per shown in drawing. Using of 12 mm thick clear

1 glass with proper crystal edges & with suggested frosted films on glass. Sqm 165.00 6,620.55

All joints are covered with teakwood beading Patti finished with polish

matching with laminate. Including door of same design if required

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.) for

Electrical works & no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the

Tile Periphery for Extra Strength The Light weight calcium silicate ceiling

tiles shall have , light reflection 85% noncombustible as per B.S. 476 part

IV, 100% humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm at joints to get required

length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and centre to centre to form agrid of

1200X600mm and secondary thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 230mm interval and laying 15mm thick Densified

edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm

x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x

35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size

3 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand Sqm 59.00 710.97

sofit cleat, anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed

The works include providing & fixing of Ply Board Ceiling which

Incorporates a fully concealed Aluminum grid. Complete with all

necessary hardware, fittings and accessories. Finish with suggested

laminates. The job also includes providing access panels, cutting of

spot lights, luminaries, speaker, etc. Sheets in size 8’ x 4' Laminates

mm in thickness of pattern shown as per drawings.. ½” (or 3/8”) screwed

on steel stud system. The steel stud frame consisting of main furring

Alum channel at every 600 mm and cross channel at every 600 mm. Both

main and cross channels are attached though jaw clip. Screws will be

corrosion proof either Chromised or Cynated. Screw fixing is done

4 mechanically with drilling machine & suitable attachment. The gaps will Sqm 0.00 4,399.65

be initially filled with jointing compound and then taped by self adhesive

covered with proper jointing compound..Contractor has to provide all

necessary cut outs for Electrical works & no extra payment shall be made

for it. Complete as per details given in drawing and as per instructions

of Architect/consultant/Engineer In charge.

Providing & fixing work station / table having ht of 750 mm Top, with

with specified powder coating and Back and side Ply of table is also made

up of 19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

beading Patti. Common or front Part of Table is Sectationized with MS

Perforated Sheet. All exposed and internal surfaces covered with

Laminate Finish of approved shade & Complete as per detail drawings &

5 as instructed by Architect/consultant/ Engineer In charge. Complete with

all necessary hardware like nails, ss screws, table chain, Key board trey,

TDS channel, adhesives etc. Contractor has to provide all necessary cut

outs for Electrical works & no extra payment shall be made for it.

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Providing & fixing office table / staff table having ht of 750 mm Top,

with 19mm thk plywood or MS pipe Structure as per Architect/ Engineer

19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

beading Patti. Item includes fixing of drawers and keyboard tray and

storage with shutters under table as per drawing. With grooves shown as

per drawing. All exposed and internal surfaces covered with Laminate

6 Finish of approved shade & Complete as per detail drawings & as Sqm 9.00 29,350.96

instructed by Architect/consultant/ Engineer In charge. Complete with all

necessary hardware like nails, ss screws, table chain, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply should

follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open

Front Side for Selves with using 12 mm thick Marin ply for framing. All

complete with proper teakwood beading and Teakwood molding as per

design. Back ply is 12 mm Marin ply. All exposed are covered with 1 mm

thick Laminate & internal surfaces are covered with 1 mm thick laminate.

External & internal joints covered with beading Patti complete with polish

7 finish. With grooves shown as per drawing. All complete with proper Sqm 193.00 10,381.62

hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS 304 etc.

All Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading. and Teakwood molding as per design.

Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick

Laminate & internal surfaces are covered with 1 mm thick laminate.

External & internal joints covered with beading Patti complete with Polish Sqm

finish. With grooves shown as per drawing All complete with proper

hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable

manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as

per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Notice Board / Pin Board

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing

9 Arrangement complete as per drawing and Directed by Engineer In Nos 6.00 7,259.38

Charge etc complete.

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Providing and fixing News paper stand size 650 x 820 x 1200 or

required height made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm.

thk inner laminate for top including back panel with shelves for

magazine and news paper as shown in drawing, all expose joints finish

10 with teakwood beadsing patti with polish finish and provision of Nos 3.00 13,044.62

openable top for news paper storage complete as per detailed drawings

and Engineer-In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU pads,

Seat and back upholstered with cushioned and MS powder coated frame

and cantilever legs. Overall dimension 590 L x 600 W x 915 H (Or as

specified) complete as directed by architect and product as per given

specification. Complete as per architectural design and concept and

approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

-Knee tilt mechanism

12 -360 swivel motion/ 100mm stroke gas Nos 2.00 10,738.07

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift

13 -PP Fixed Arm rest Nos 21.00 5,024.65

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with

14 paddle. Capacity-10 to 15 Ltr. Nos 5.00 557.52

Supplying and providing dust bin made of 100% virgin plastic with

15 paddle. Capacity-120 L Nos 5.00 1,568.03

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch

with speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and warranty

etc as per manufacturer’s specifications. Fabric to be as per approved

sample. All the work complete as per the detailed drawing and

instruction of Architect/EIC. Soltis-99-Color-Alu fabric: 39%

Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,

Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N-

N): 2%-4%, Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 -

0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing

16 Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Sqm 313.00 1,962.94

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project Manager.

(The mode of Measurement: The size of the blind will be measured from

end to end bracket (Left to Right bracket) & height will be measured from

top of the pelmet till the bottom of the bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with

proportionately base dimenstion as per approved design by client and

17 complete as per instruction of engineer-in charge and consultant. Nos 1.00 150,995.00

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden

frame of size 2in x 1in consisting 6mm thick ply in back with digital vinyl

18 printing and 5mm thick glass on top if required. Nos 50.00 2,439.15

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb

RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE

19 STUDENT, Full HD display of 21 to 23.8' with keyboard and mouse. Nos 9.00 59,748.35

Providing and fixing Automatic Duplex laser printer with 30 pages per

20 minute print speed, 8 mb memory, Large 250 sheet paper tray with USB Nos 1.00 15,157.58

connectivity.

Supplying and providing xerox machine- -20PPM Copy / Print /Color

21 Scan / Duplex DADF /Single Nos 1.00 58,075.00

Providing and fixing Directional and Informative Signages- SS Plate,

Grade 304, Brush finish, 2mm Thickness with smoothen corner edges,

22 Acid etching with duco color, SS studs 1.5' away from wall.fitting as per Sqm 1.50 92,433.18

dirction of Architect and EIC

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick

23 letter 1.5" depth 10" Height with Duco color & fitting as per direction of Nos 1.00 52,520.00

Architect & EIC.

Supplying and fixing Foldable table of required size top made with

prelaminated MDF board and ss legs which can be assembled as per

24 approved design and direction of Architect & EIC Nos 50.00 9,756.60

Providing and fixing single bed made from 12mm thk plywood and

wooden legs including Matress , Vaccum pillow, fabric 120 gsm micro

peached filling- 3D 750 gm anti alergic washable fluffy and bouncy with

25 single solid micro reversible comforter and single printed 300tc bed Nos 1.00 12,230.08

sheet with one pillow cover made from same fabric

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x

26 2160 pixels with HDR TypeHDR 10+ complete as per approved make and Nos 1.00 102,067.57

Supplying and providing Three Seater Sofa as per given specification:

-32 density hard foam used for back rest

-28 density medium soft foam used for seat

-Soft PVC upholster

-Chrome plated legs

27 -Dimension- W-1910 X D-730 X H-680 (Or as specified) Nos 1.00 25,356.05

- Black color (Or as specified)

Supplying and providing Two Seater Sofa as per given specification:

-32 density hard foam used for back rest

-28 density medium soft foam used for seat

-Soft PVC upholster

-Chrome plated legs

28 -Dimension-W-1450 x D-730 X H-680 (Or as specified) Nos 1.00 17,399.27

- Black color (Or as specified)

Point wiring in Copper (Modular)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

29 necessary Lamp holder/ceiling rose / H.D.Connector as directed. Pt. 5.00 485.81

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet

for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

30 Note:- Maximum up to 6 mtrs length, excess will be considered as Pt. 5.00 167.66

Mains for Secondary Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on /

31 in wall / ceiling as per pipe erected. with necessary ceiling rose / Pt. 2.00 674.68

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.-

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board-(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories.-[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories-[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu.

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board..--

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules

35 erected on / in wall / ceiling with following type accessories Pt. 437.00 257.55

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type of

pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.-(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete-

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge..--

(4) TV Co-axial Socket outlet -

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge..

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat-III

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(7) Blank Plate Single

Providing following type of Modular Type Accessories mounted with PVC

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(8) Computer RJ-45 socket . cat-lll

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with necessary

connections as directed

41 1 no. 6A/16A universal plug-switch combined. Ea 5.00 1,133.22

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

42 (2) 25 mm Mtr. 680.00 21.21

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free and

flame proof confirming BS with necessary end caps Internal and external

43 bend, flat bends, coupler, tee etc..All necessary accessories and Mtr. 100.00 188.87

measuring of following sizes (3) 50 mm x 50 mm trunking

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

44 continuity of following size -(A) With medium class Rigid PVC pipe and Mtr. 820.00 62.62

accessories-

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

45 continuity of following size - Mtr. 50.00 82.82

(A) With medium class Rigid PVC pipe and accessories-

(b) 2 wire 2.5 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

46 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description Nos. 10.00 535.30

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Tube Light with integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet Cat-lll

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

48 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description Ea. 20.00 1,794.77

have shown ranges of Wattage capacity of LED fittings.The Engineer

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll

FANS & ACCESSORIS.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

49 canopy & 30 cm. down rod erected with earthing.(Make shall be approved Ea. 5.00 1,948.29

by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

50 Pipe down rod erected duly painted for fan complete with proper Mtr. 5.00 108.07

insulation without leakage and earthing.

Supplying & erecting approved make LAN cable of following size in

51 existing pipe as per direction [D] CAT - 6 e RMT 50.00 76.76

Total Amount Rs. =

Total Amount Rs. =

Sr. Tender Rate

Description of Item Unit Quantity Total Amount

Description of Item Unit Quantity Total Amount

No. Rate In FIghure

I/We am/are willing to carry out the work @............ % above/below percent ( should be written

in figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out

as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Contractor with Seal Signature of Contracting Authority with Seal