Construction of Ampitheater and Cafeteria at Beamathang Kargil

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Ordinay Rock @ 40%

All kind of soil @ 60%

Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Ordinary Rock @ 20%

All kinds of Soil @ 80%

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.

Disposal of excavated earth including all type of carriage and lead up to avg. 5.0km

Dumping of stone including cost of stone (on horizontal)

Dry random rubble masonry with hard stone in foundation and plinth:With bond stone, quarry stone

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud Mat.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete.

Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms.

Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Sal wood

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)

Providing fixing paneling and glazing in panalled or panalled glazed shutters for door/windows 25mm to 40mm thick of 1st class kail wood.

Providing and fixing of glass panes, of thickness 4.0 mm (weighing not less than 10 kg/sqm) including all type of fixture by way of wooden beading of 1 st class kail wood etc complete.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 100 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto top level including curing.One face dressed Fine chisel dressed

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin- Charge. (18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc.)

CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.

MARBLE STONE FLOORING Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm

Providing and fixing of Door, Window fittings of approved brand including all necessary requirements complete.

Tower bolt 6" long

Handles for door

Handels for window

15 mm C.P. brass tap with elbow operation lever

15 mm C.P. brass 2 in 1 tap

Handles with lock system of main doors ( Godrej Make)

Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood

Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood

Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.With resin bonded rock wool with density 48 kg/cum With resin bonded rock wool with density 48 kg/cum

Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben, Robina or any other approved brand as per specification approved by engineer In charge )

Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete

Providing and fixing high rip colour profile sheets 0.50 mm thick made or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm T.C.T (Total coated thickness) high tensile S.M.P Galvalume steel and fixed with 8 mm Galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seem and seem bolts 300 mm centres on all sides and end lappes etc. (Measured for unit of laid area).

Providing, hoisting and fixing trusses/ purlins, rafters, posts, post plates or like components including cost of screws etc. complete. First class Budloo wood.

Providing and fixing of 1.5" and 1' wide one side planned/designed eves boarding including all fixtures complete

Providing and fixing of 1.5" thick Ist class kail wood weather board including all fixtures complete

Carriage of construction material

Carriage of Cement by MT for avg 2 KM

Carriage of Sand by MT for avg 3 KM

Carriage of Bajari by MT for avg 18 KM

Carriage of Stone by MT for avg 8KM

Carriage of Steel by MT for avg 2 KM

Sanitary job:- Providing and fixing of sanitary items/all accessories/ plumbing including all allied works required for successful completion and functioning of 04 units of Public convenience. The sanitary items/ fittings/ PPRC piping shall be of approved brand viz Jaguar/ Cera/Hindware (sample of each items to be approved prior to start of the work).The job inclusive of soakage pits/septic tank of required capacity/underground water reservoir with necessary motors of required power/pressure pumps/two 1000 litres puf insulated tank (company made) with necessary fittings (Complete Job ready to operate) The operation incl.maintenace for a period of one year from the date of successful completion shall be the responsibility of the contractor. (Any item or items found necessary for completion but not indicated in the nomenclature shall be deemed to be part of the nomenclature).

Electrification job:- Providing Electrification for Ampitheatre and PC’s internal as well as outer/ external lighting including wiring of required specifications, screen lighting, sound system,PA system, Audio visual setup and Light and illuminance effect and providing/ installation readymade screen with accessories with sunshade/ rainproof roofing (Screen size 22'x12') Complete Job ready to operate. All items sample shall be approved by the expert/ Engineer In charge site before executions( the job includes all items and all accessories required for completion and successful operation/functioning of the Ampitheatre in totality)The operation/maintenance shall be the responsibility of the contractor for a period of one year after successful completion of the work.(any item or items found necessary for completion but not indicated in the nomenclature shall be deemed to be part of the nomenclature).

M/S BK Enterprises