PERIODICAL SERVICES INCLUDING ALL CIV WORKS SUCH AS PATH, FENCING, GATE, DOOR, WINDOW, PLINTH, TILING WORKS ETC FOR E/M INSTALLATION UNDER GE IMA DEHRADUN

Amount

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.

S&F Rubber moulded precast coloured concrete Interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing interlocking tiles etc complete, all as specified and directed.

M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing with & including 25mm thick sand cushioning layer complete, all as specified and directed.

S&F non skid tiles, exterior grade, any pattern of size 300x300mm/ 400x400mm 10-12 mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4, incl demolition of Old tiles, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed

M&L, for Brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) but except bricks complete all as specified and directed.

M&L Brick work with sub class 'B' bricks (Old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified.

Supply only liquid water proofing compound complete all as specified & directed

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed.

Cutting and grinding of existing Granite/kota/terrazo stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and as directed.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for RCC (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns, floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Use and Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc in fair finish surface.

Mild steel TMT bars 8mm dia and over, bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed.

M&L for for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete, as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc with including either hooks and hinges or steel hanging doors dittings also fastening and fixing conforming to Fe 410W Gde E 250 complete all as specified.

S&F mild steel plain black sheet 1.00mm thick in steel gates and similar work , cut to size , holes punched, including round headed scres clout nails or rivets fixed to steel framing with plain 40 mm lap joints with reveted or welded seams including bending or turning up mitred angles etc as required

S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling/ taking out of Old water tank & removing to where directed complete all as specified and as directed.

PVC lid for PVC water tank of capacity upto 1000 Ltr with hinging device and locking arrangement with necessary nuts, bolts and washer etc fixed in repair complete all as directed.

S&Fin repairs Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as directed.

S&F MS Plates (plain or chequered), square cut or notched (ordinary and countersunk) forming holes with riveted, bolted or welded attachment Fe-290 Gde E-165 complete all as specified and as directed.

S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F, 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, all as specified.

S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed.

S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.

S&F in repairs brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cOld with long screwed shanks and fly nuts, screwed to iron pipe

S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S &F 15 mm dia concealed stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified and directed.

Supply and fixed in repair PVC waste pipe 32 MM dia plain flexible pipe suitable for wash hand basin as direted.

Supply and fixed in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, concrete bedding and making good floor complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, and incl 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified and directed.

S&F, 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

S&F MS work as in fencing posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets(for securing wire mesh etc) including all necessary drilling,bolting or riveting etc and similar work confirming Fe-290 Gde E-165 to including embedding in concrete complete all as specified and directed.

Dismantling fencing wire mesh, any type

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S/F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut n.exc 5 cm long and dia 5 to 10 mm

M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repairs Concertina coil 600mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shape barbs with 18 SWG sheet, weight of each coil should not be less than 9.50 Kg, each coil should have 15 rounds and should covers 6 RM length, fixed over barbed wire at points wherever coil touches the bottom of barbed wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed. NOTE: (i) Hogging shall be fixed at a interval of 600mm centre to centre, wherever it touches with the Barbed wire wire.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggreates as in flooring complete all as specified and directed complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in flooring surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L PCC 1:3:6 type C2 ( with 40 mm graded agrregate) in Surface channel or drains including necessary form works , stops ,moulds etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

Supply only glass dividing strips 38mm wide and 3mm thick

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hOld fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete as per direction of Engineer-in-Charge

S&F Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

S&F Pressed steel frame of 125 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

35mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as directed.

35mm thick IInd class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass gauge/(with sash bar) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass or gauge etc size of members of shutters as specified in SSR Part I section 8 clause 8.24(a) completed all as directed.

S&F PVC cabinet shutter as in Cup board, wardrobe etc with frame of min size 60mm x 44mm including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/M3.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanished wire staples

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane, complete, all as specified and directed.

S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 200 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

S&F 150mm size stainless steel fancy type handle, complete all as specified and directed.

S&F 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed.

S & F Continuous (piano) hinges, 30 mm width mild steel, bright finish or electrogalvanised complete all as specified.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed

Welding in repair in n.exc 2.5cm in length thickness of metal to be welded exc 6mm not exc 9mm in different location complete all as specified and directed.

S & F, in repair , 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

S & F, in repair , 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) WC connector with lip ring for WC outlet, complete all as specified and directed .

S&F in repairs PVC (SWR) bend 110 mm any radius complete all as specified and directed.

S&F in repairs PVC (SWR) bend 110 mm any radius with access door, complete all as specified and directed.

S&F in repairs PVC (SWR) bend 75mm any radius complete all as specified and directed.

S&F in repairs PVC (SWR) bend 75mm any radius with access door, complete all as specified and directed.

S&F in repairs, PVC (SWR) floor trap of outlet diameter 75mm, plain with grating including jointing with solvent cement , complete all as specified and directed.

S&F, Steel rolling shutter with 1.25mm thick laths, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and stable and one shop coat primer, errected in position as indicated, including dismantling of Old unserviceable rolling shutter, all complete as specified.

Taking down carefully unservicable steel rolling shutter of any size and any type including top cover, anchoring rod, hasp and stable, gear box and re-errection in same position after replacement of unsevicable components like ball bearing, safety lever lock, bevel gear box, laths etc including oiling, greasing as indicated to make the rolling shutter smooth functional, all complete as specified and directed.

Taking down existing broken portion of upward, downward / inverted RCC facia or roof slab or visible concrete reinforcement of any thickness and shape and surface repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / chicken wire mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffOlding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

M&L for complete removal of exisiting finish/preparing newly plastered surface (with mechanical sander machine) on walls and applying exterior grade water proof putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine .

Preparation of Old plastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed.

M&L for preparation of Old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified & directed.

All as per description of serial item No 108 above but applying one coat of white wash on ceiling surfaces.

M&L for preparation of Old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint, complete, all as specified & directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including preparation of surfaces and applying two coats of cement base paint on wall surface complete all as specified and directed.

Complete removal of existing treatment from wall/preparing newly plastered walls and applying one coat of wall care putty (1 mm thick) and finished surface even and smooth, complete all as specified and directed.

M&L for preparation of Old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed.

M&L for preparation of Old decorated/putty surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete, all as specified & directed.

Preparation of Old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L, for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and laying of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method by authorised applicator of manufacturer of IWL/STP/Texas India/ Hydrotech Ltd/Sikka, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond defence land,complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. 3. The work shall be carried out in stages and each stage shall be passed by Engr-in-Charge and GE.

M&L for providing 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over Old RCC roof complete all as specified and directed. Note : Water proofing compound (liquid) shall be measured and paid seperately.

ACE BUILDERS AND CONTRACTORS (BID ID -3497619)

Meher enterprises (BID ID -3492341)

M/S S P BUILDERS (BID ID -3492614)

M/S RAJESH KUMAR GOYAL (BID ID -3491545)

Sanjay Enterprises (BID ID -3491562)

M/s caspur construction company (BID ID -3492157)