Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC TC 25 2201 NNRA 97 NALANDA LANE KOWDIAR NANTHENCODE KOWDIAR P O 695003 | THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695003 | L1 | Accepted-AOC L1 |
Tender Value
₹4.3 L
EMD Value
₹10,805
Closing Date
2 Nov 2024, 3:00 pmClosed
Assistant Executive Engineer
Office of the Assistant Executive Engineer, PWD Electronics Rural Subdivision, PMG, Thiruvananthapuram
GENERAL-Addl. CCTV - Cliff House-SITC of Additional CCTV at Cliff House compound.-General Electronics Work
2024_PWD_690491_3
PWD/BLDG/EST/1234/2024_7_1_1
Open Tender
Electrical Works
Item Rate
270 days
Cliff House, Nanthancod, TVM
as per SBD
15 documents required · 15 mandatory
₹955
₹10,805
11 Feb 2025
24 Oct 2024
4 Nov 2024
24 Oct 2024
2 Nov 2024
24 Oct 2024
24 Oct 2024 - 2 Nov 2024
Amount
CCTV surveillance system
OD218079/2023-2024:Supply and Installation of greater than or equal to 5MP IR Bullet Outdoor Camera 1/2.7 inch or better progressive scan Image Sensor, 4mm fixed focal length of lens, Angle of view 78 degree (H) 59 degree (V) @ 5MP / 82 degree (H)-46 degree (V) @4MP Main Stream: 5MP/4MP (1~25/30fps), Sub Stream: 800x600 (1~25/30fps), Third Stream: VGA (1~25/30fps), Wide Dynamic Range (WDR) up to 120 dB.Low light performance (0.03 lux in color 1 mode), 50m IR distance, depending on scene reflectance, H.265 Smart Codec video compression, Motion detection / Intrusion detection / People detection, with Micro SD card slot (support upto 256GB), PoE (IEEE 802.3af) or 12VDC, ONVIF profile S & G compliant, IP 66 etc. Preferred Make: Compactable with existing NVR (Honeywell HEN32204)
OD218093/2023-2024:Supply and Installation of greater than or equal to 5MP IR Bullet Outdoor varifocal Camera with 1/2.7 inch or better progressive scan Image Sensor, 2.8mm-12mm focal length of lens, MFZ lens, Angle of view 88 degree~30 degree (H) 65 degree ~23 degree (V) @ 5MP/93 degree~32 degree (H)-51 degree~18 degree (V) @ 4MP, Main Stream: 5MP/4MP (1~25/30fps), Sub Stream: 800x600 (1~25/30fps), Third Stream: VGA (1~25/30fps), Wide Dynamic Range (WDR) up to 120 dB, Low light performance (0.035 lux in color mode), 50 m (165 ft) IR distance, depending on scene reflectance, H.265 Smart Codec video compression, Motion detection / Intrusion detection / People detection, Working temperature: -30 degree Celsius ~60 degree Celsius (-22 degree Fahrenheit~140 degree Fahrenheit), with Micro SD card slot (support upto 256GB), PoE (IEEE 802.3af) or 12VDC, ONVIF profile S and G compliant, IP 66 rating etc. Preferred Make: Compactable with existing NVR (Honeywell HEN32204)
OD221700/2023-2024:Supply and Installation of 10 port Smart Managed 10/100/1000 Mbps PoE Switch having 8 x 10/100/1000 Mbps BASE-T PoE ports and 2 Gigabit SFP ports, minimum 46W PoE budget, switching capacity Greater than or equal to 20Gbps, minimum Buffer memory 512KBytes . 48 V DC external power input, Warranty : 5 years Preferred Make and Model: Netgear GS110TP, Allied Telesis, Brocade, Cisco, or equivalent
Cabling and necessary accessories
OD228699/2023-2024:Supply and fixing of 6U Outdoor Pole Mount Rack- Double Section with all accessories Racks should be manufactured out of steel sheet punched, formed, welded and powder coated Rack should have 100% assured compatibility with all equipments conforming to DIN 41494 (General Industrial Standard for equipments) or Equivalent EIA /ISO / EN Standard Rack should have 2 No Adjustable, 19 inch verticals with Punched 9mm Square Hole and Universal 12.7mm-15.875mm alternating hole pattern offering greater mounting flexibility and maximizes usable mounting space. The Racks should be 550 mm in width and 500 mm in depth for Network application. Rack should two Sections : front Section to be Bolted to back section and Back section Fixed to Wall. Front Section should be Swing type and give Access to back on Opening. The rack should have ACDB 6 port, necessary PDU, Cable manager, cooling fan etc. Approved Makes- D-Link, HCL, Netrack, President, Valrack.
OD228830/2023-2024:Supply and fixing of 9U Outdoor Pole Mount Rack - Double Section with all accessories Racks should be manufactured out of steel sheet punched, formed, welded and powder coated Rack should have 100% assured compatibility with all equipments conforming to DIN 41494 (General Industrial Standard for equipments) or Equivalent EIA /ISO / EN Standard Rack should have 2 No Adjustable, 19 inch verticals with Punched 9 mm Square Hole and Universal 12.7mm-15.875mm alternating hole pattern offering greater mounting flexibility and maximizes usable mounting space. The Racks should be 550 mm in width and 500 in depth for Network application. Rack should Two Sections: Front Section to be Bolted to back section and Back section Fixed to Wall. Front Section should be Swing type and give Access to back on Opening. The rack should have ACDB 6 port, necessary PDU, Cable manager, cooling fan etc. Approved Makes- D-Link, HCL, Netrack, President, Valrack.
OD218103/2023-2024: Supply, conveyance, erection and commissioning of Camera Pole with min 5 mtr height, manufactured using stainless steel as per BS EN 10025 grade S355 J0 or equivalent. The pole shall be hot dip galvanised (single dip) internally and externally having uniform coating thickness of 85/65 microns for bottom/top sections respectively as per IS 2629/BSEN ISO 1461. The pole shall have 100mm diameter and and thickness 3 mm. it should fixed in a concrete footing of min height of 1mtr, properly finished with painting and having 1 meter Copper Alloy based lightning Arrester, clamp, wire with Graphite based chemical compound earthing and min 250 microns copper bonded low carbon steel rod, lightning and surge protection for power supply and environment protected enclosure suitable for the termination of cables etc. The pole section should be suitable for wind velocity as per IS 875 Part-3. The pole should consist of suitable single arm bracket of suitable length welded to it for mounting the camera and the bottom of the pole foundation should have provision for fixing CCTV cabinet box (255 x 355 x 122 mm) in recess to incorporate all other accessories as required.
OD228636/2023-2024: Supply, conveyance, erection and commissioning of 1 meter supporting pole. The pole shall be hot dip galvanized (single dip) having diameter 76.2 mm, (3inc) and should be fixed on a concert foot.
OD218174/2023-2024:Supply and Installation of 19 inch 6 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with required number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, LC SM pigtail, splice tray etc. Including splicing charges. Preferred make: Commscope, Molex, R and M, Sterlite, AFL Hyperscale or equivalent.
OD221714/2023-2024:Supply and fixing 24 port Enhanced CAT-6, 8 port loaded rack mountable Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden,Molex, Panduit, R and M
OD218165/2023-2024:Supply, laying, testing, certification and documentation of 1Mtr factory crimped CAT-6 Giga UTP patch cord with LSZH sheathing Preferred Make: Actassi, Belden,Commscope,Honeywell, Molex,Norden,Panduit,R and M.
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
OD218169/2023-2024:Supply and Installation of fully Armored 6 Core single mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Approved Make:- Commscope, Molex, R and M, Sterlite, Honeywell
OD218181/2023-2024:Supply and drawing of High carbon stay wire with all required accessories for drawing the fibre cables
1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
OD228807/2023-2024:Supply and Installation of 64GB Micro SD memory card suitable for the camera. Approved make: Camera OEM, Hp, Samsung, Sandisk
OD228808/2023-2024:Supply, laying, certification and documentation of 23 AWG Solid copper CAT-6 UTP cable with LSZH (Low Smoke Zero Halogen) through the existing conduit and casing and caping as required Preferred Make: Actassi, Belden, C2G(Legrand),Molex,Panduit,R and M
OD228820/2023-2024:Supply and Installation of 1G SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 40 km. Preferred Make: Same OEM as switch.
OD228821/2023-2024:Supply and providing Duplex SC/UPC-LC/UPC Patch chord 1 mtr. Preferred Make: AMP, Commscope, Legrand, Molex, R andM, Sterlite
OD228831/2023-2024:Supply, Installation, Testing and Commissioning of SMPS that converts 230V AC to 48V DC.
90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm
Bidder Name
ELIGHT COMPLETE NETWORKING SOLUTIONS
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1092071.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .